PN7160B1HN vs PN7160A1HN Perbandingan
Perbandingan bersamaan detil PN7160B1HN dari NXP Semiconductors dan PN7160A1HN dari NXP Semiconductors. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Perbandingan Spesifikasi
| Parameter Umum | PN7160B1HN | PN7160A1HN |
|---|---|---|
| Merek | NXP Semiconductors | NXP Semiconductors |
| Kategori | RF Transceivers | RF Modules |
| Status Lingkungan Hidup | Aktif | Aktif |
| Fungsi | NFC Plug and Play Controller | — |
| Antarmuka | NCI over SPI | — |
| Operating Frequency | 13.56 MHz | 13.56 MHz |
| Supported Standards | FeliCa, ISO 14443, ISO 15693, MIFARE, NFC Forum | — |
| Host Interface Supply | 1.65 V to 1.95 V | — |
| RF/Analog Supply | 3 V to 3.6 V | — |
| Suhu Kerja | -40 C to +85 C | -30 C to +85 C |
| Paket | 40-VFQFN Exposed Pad | HVQFN-40 (6 x 6 x 0.85 mm) with Exposed Pad |
| Tipe Mounting | Surface Mount | Surface Mount |
| Integrated Firmware | Yes (NCI-compliant) | — |
| Reader/Writer Mode | Yes | — |
| Card Emulation Mode | Yes | — |
| Peer-to-Peer Mode | Yes | — |
| Host OS Support | Android, Linux, Windows | — |
| Status RoHS | Compliant | Compliant |
| Level MSL | 1 | — |
| Product Type | — | NFC Plug and Play Controller |
| Supported Protocols | — | FeliCa, ISO 14443, ISO 15693, MIFARE, NFC |
| Host Interface | — | I2C (default, hardware) / SPI (EEPROM-configurable) |
| NCI Version | — | NCI 2.0 (pre-loaded firmware) |
| Digital Supply Voltage | — | 1.65 V to 1.95 V (VDD) |
| Analog/RF Supply Voltage | — | 3.0 V to 3.6 V (VBAT, VBAT_PA) |
| I/O Supply Voltage | — | 1.65 V to 1.95 V (VDDIO) |
| I2C Address | — | 0x28 (7-bit) |
| RF Output Power | — | [DATA_NEEDED: TX output power dBm] |
| Antenna Pins | — | TX1, TX2 (differential); RX1, RX2 |
| Integrated MCU Core | — | ARM Cortex-M0 (ROM-resident NCI firmware) |
| Operating Modes | — | Reader/Writer, Card Emulation (P2P), Tag Detection |
| Modes of Operation | — | Active, Standby, Hard Power Down, Low-Power Polling |
| Peak Reflow Temperature | — | 260 C (per JEDEC J-STD-020) |
| Moisture Sensitivity Level | — | MSL 3 |