TLE8444SLXUMA1 vs TLE82092SAAUMA1 तुलना
विस्तृत दोनों ओर की तुलना TLE8444SLXUMA1 द्वारा Infineon और TLE82092SAAUMA1 द्वारा Infineon. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Infineon
TLE8444SLXUMA1 - Quad Half-Bridge Motor Driver, 24V, AEC-Q100 | Infineon
TLE8444SLXUMA1 ✓ सक्रिय
विशेषता तुलना
| पैरामीटर | TLE8444SLXUMA1 | TLE82092SAAUMA1 |
|---|---|---|
| ब्रांड | Infineon | Infineon |
| श्रेणी | Motor Drivers | Motor Drivers |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Motor Type | Bipolar, Unipolar DC / Stepper | DC motor / solenoid (H-bridge) |
| टोपोलॉजी | Quad Half-Bridge | H-bridge, two N-channel half-bridges |
| आउटपुट की संख्या | 4 half-bridges | — |
| Supply Voltage (VBB) | 4.5 V to 24 V | — |
| Overcurrent Shutdown | 0.9 A typical per channel | — |
| On-Resistance (RDS(on)) | 1.3 Ohm typical per switch | — |
| इंटरफ़ेस | Parallel (direct logic input) | — |
| Technology | SPT BiCDMOS (Bipolar + CMOS + DMOS) | — |
| ऑपरेटिंग तापमान | -40 C to +150 C junction | -40 C to +150 C (junction) |
| पैकेज | PG-SSOP-24-7 (exposed pad) | PG-DSO-20-65 (20-pin exposed-pad SOIC) |
| माउंटिंग प्रकार | Surface Mount | Surface Mount |
| पिन काउंट | 24 | — |
| AEC-Q100 Qualification | Qualified (automotive grade) | — |
| RoHS स्थिति | Compliant | Compliant |
| MSL स्तर | [DATA_NEEDED: MSL moisture sensitivity level] | [DATA_NEEDED: MSL rating] |
| Integrated Freewheeling Diodes | Yes | — |
| Diagnostic Features | Open load, short-to-GND, short-to-VBB, overtemperature | Open-load, short-to-GND, short-to-Vbb, over-temperature, under-voltage |
| Undervoltage Lockout | Yes | — |
| Supply Voltage Vbb | — | 5 V to 28 V (40 V transient tolerant) |
| Continuous Load Current | — | 5.5 A |
| Rds(on) per MOSFET (typ) | — | [DATA_NEEDED: Rds(on) per switch] |
| Selectable Current Limit Ranges | — | 4 programmable thresholds |
| Selectable Slew Rate Settings | — | 2 programmable settings |
| Control Interface | — | SPI (up to 5 MHz, daisy-chain capable) |
| Package Dimensions | — | 3.25 mm x 11 mm x 15.9 mm (per Hotenda listing) |
| Process Technology | — | Infineon SMART7 automotive |
| Functional Safety Target | — | ISO 26262 ASIL-B / ASIL-C capable (per datasheet family) |