TLE9104SHXUMA1 vs IFX9201SGAUMA1 तुलना
विस्तृत दोनों ओर की तुलना TLE9104SHXUMA1 द्वारा Infineon और IFX9201SGAUMA1 द्वारा Infineon. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
विशेषता तुलना
| पैरामीटर | TLE9104SHXUMA1 | IFX9201SGAUMA1 |
|---|---|---|
| ब्रांड | Infineon | Infineon |
| श्रेणी | Power MOSFET Drivers | Motor Drivers |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Product Type | Multi-Channel Low-Side Power Switch | — |
| Number of Channels | 4 | — |
| Load Current per Channel | 3 A (continuous) | — |
| टोपोलॉजी | 1:1 N-Channel Low-Side Switch | Full H-Bridge (2 half-bridges) |
| Supply Voltage Range (VDD) | 4.5 V to 28 V | — |
| Logic Reference (VIO) | 3.3 V / 5 V compatible | — |
| Communication Interface | 16-bit SPI | — |
| R_DS(on) per Channel | [DATA_NEEDED: typical R_DS(on) in mohm] | — |
| ऑपरेटिंग तापमान | -40 °C to +150 °C (junction) | — |
| पैकेज | PG-DSO-20-88 (20-pin BFSOP with exposed pad) | PG-DSO-12-17 (12-BSOP with Exposed Pad) |
| माउंटिंग प्रकार | Surface Mount | Surface Mount |
| Protection Features | Over-current, Over-temperature, Over-load, short-to-ground, open-load detection | UVLO, OCP, OTP, short-circuit, open-load detection |
| Diagnostic Output | SPI status registers (per-channel fault flags) | — |
| Automotive Qualification | AEC-Q100 qualified (automotive grade) | — |
| MSL स्तर | MSL3 (per JEDEC J-STD-020) | [DATA_NEEDED: MSL level] |
| RoHS / Lead-Free | RoHS compliant, lead-free | — |
| Reset Pin (RESN) | Active-low with configurable reset duration | — |
| Supply Voltage Range | — | 5 V to 36 V |
| Continuous Output Current | — | 6 A |
| Peak Output Current | — | [DATA_NEEDED: peak current] |
| RDS(on) per Switch (typ) | — | [DATA_NEEDED: RDS(on)] |
| Control Interface | — | PWM, DIR, SPI diagnostics |
| PWM Frequency (max) | — | 25 kHz |
| SPI Clock Frequency (max) | — | 4 MHz |
| Operating Temperature Range (TJ) | — | -40 C to +125 C |
| RoHS स्थिति | — | Compliant |
| Target Applications | — | DC motors, inductive loads, power tools, home appliances, building automation |