TLE9104SHXUMA1 vs ITS4100SSJNXUMA1 तुलना

विस्तृत दोनों ओर की तुलना TLE9104SHXUMA1 द्वारा Infineon और ITS4100SSJNXUMA1 द्वारा Infineon. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

Infineon
TLE9104SHXUMA1 TLE9104SHXUMA1 - 4-Ch 3A SPI Low-Side Switch | Infineon

TLE9104SHXUMA1 - 4-Ch 3A SPI Low-Side Switch | Infineon

TLE9104SHXUMA1 ✓ सक्रिय
Infineon
ITS4100SSJNXUMA1 ITS4100SSJNXUMA1 - 2A Smart High-Side Power Switch | Infineon

ITS4100SSJNXUMA1 - 2A Smart High-Side Power Switch | Infineon

ITS4100SSJNXUMA1 ✓ सक्रिय

विशेषता तुलना

पैरामीटर TLE9104SHXUMA1 ITS4100SSJNXUMA1
ब्रांड Infineon Infineon
श्रेणी Power MOSFET Drivers Power MOSFET Drivers
लाइफसाइकिल स्थिति सक्रिय सक्रिय
Product Type Multi-Channel Low-Side Power Switch High-Side Power Switch
Number of Channels 4 —
Load Current per Channel 3 A (continuous) —
टोपोलॉजी 1:1 N-Channel Low-Side Switch 1:1 N-Channel High-Side
Supply Voltage Range (VDD) 4.5 V to 28 V —
Logic Reference (VIO) 3.3 V / 5 V compatible —
Communication Interface 16-bit SPI —
R_DS(on) per Channel [DATA_NEEDED: typical R_DS(on) in mohm] —
ऑपरेटिंग तापमान -40 °C to +150 °C (junction) —
पैकेज PG-DSO-20-88 (20-pin BFSOP with exposed pad) PG-DSO-8 (exposed pad)
माउंटिंग प्रकार Surface Mount Surface Mount
Protection Features Over-current, Over-temperature, Over-load, short-to-ground, open-load detection —
Diagnostic Output SPI status registers (per-channel fault flags) —
Automotive Qualification AEC-Q100 qualified (automotive grade) —
MSL स्तर MSL3 (per JEDEC J-STD-020) —
RoHS / Lead-Free RoHS compliant, lead-free —
Reset Pin (RESN) Active-low with configurable reset duration —
Maximum Continuous Load Current — 2 A
On-State Resistance RDS(on) — [DATA_NEEDED: RDS(on) typical value]
Operating Supply Voltage Range — [DATA_NEEDED: VBB min/max]
Overvoltage Protection (Load Dump) — Yes
Overload Protection — Yes
Current Limitation — Yes
Short Circuit Protection — Yes
Thermal Shutdown with Restart — Yes
Reverse Battery Protection — Yes
Fast Demagnetization of Inductive Loads — Yes
Status / Diagnostic Output — Yes
ऑपरेटिंग तापमान रेंज — [DATA_NEEDED: Tj range]
RoHS स्थिति — Compliant
AEC-Q100 Qualification — Yes (Automotive Grade)

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध