TLE9104SHXUMA1 vs ITS4100SSJNXUMA1 Perbandingan
Perbandingan bersamaan detil TLE9104SHXUMA1 dari Infineon dan ITS4100SSJNXUMA1 dari Infineon. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Perbandingan Spesifikasi
| Parameter Umum | TLE9104SHXUMA1 | ITS4100SSJNXUMA1 |
|---|---|---|
| Merek | Infineon | Infineon |
| Kategori | Power MOSFET Drivers | Power MOSFET Drivers |
| Status Lingkungan Hidup | Aktif | Aktif |
| Product Type | Multi-Channel Low-Side Power Switch | High-Side Power Switch |
| Number of Channels | 4 | — |
| Load Current per Channel | 3 A (continuous) | — |
| Topologi | 1:1 N-Channel Low-Side Switch | 1:1 N-Channel High-Side |
| Supply Voltage Range (VDD) | 4.5 V to 28 V | — |
| Logic Reference (VIO) | 3.3 V / 5 V compatible | — |
| Communication Interface | 16-bit SPI | — |
| R_DS(on) per Channel | [DATA_NEEDED: typical R_DS(on) in mohm] | — |
| Suhu Kerja | -40 °C to +150 °C (junction) | — |
| Paket | PG-DSO-20-88 (20-pin BFSOP with exposed pad) | PG-DSO-8 (exposed pad) |
| Tipe Mounting | Surface Mount | Surface Mount |
| Protection Features | Over-current, Over-temperature, Over-load, short-to-ground, open-load detection | — |
| Diagnostic Output | SPI status registers (per-channel fault flags) | — |
| Automotive Qualification | AEC-Q100 qualified (automotive grade) | — |
| Level MSL | MSL3 (per JEDEC J-STD-020) | — |
| RoHS / Lead-Free | RoHS compliant, lead-free | — |
| Reset Pin (RESN) | Active-low with configurable reset duration | — |
| Maximum Continuous Load Current | — | 2 A |
| On-State Resistance RDS(on) | — | [DATA_NEEDED: RDS(on) typical value] |
| Operating Supply Voltage Range | — | [DATA_NEEDED: VBB min/max] |
| Overvoltage Protection (Load Dump) | — | Yes |
| Overload Protection | — | Yes |
| Current Limitation | — | Yes |
| Short Circuit Protection | — | Yes |
| Thermal Shutdown with Restart | — | Yes |
| Reverse Battery Protection | — | Yes |
| Fast Demagnetization of Inductive Loads | — | Yes |
| Status / Diagnostic Output | — | Yes |
| Rentang Suhu Kerja | — | [DATA_NEEDED: Tj range] |
| Status RoHS | — | Compliant |
| AEC-Q100 Qualification | — | Yes (Automotive Grade) |