TLE9104SHXUMA1 vs ITS4100SSJNXUMA1 比較
詳細並排比較 TLE9104SHXUMA1 由 Infineon 與 ITS4100SSJNXUMA1 由 Infineon. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況，以找出最符合您設計需求的元件。
規格比較
| 參數 | TLE9104SHXUMA1 | ITS4100SSJNXUMA1 |
|---|---|---|
| 品牌 | Infineon | Infineon |
| 類別 | Power MOSFET Drivers | Power MOSFET Drivers |
| 生命週期狀態 | 啟用中 | 啟用中 |
| Product Type | Multi-Channel Low-Side Power Switch | High-Side Power Switch |
| Number of Channels | 4 | — |
| Load Current per Channel | 3 A (continuous) | — |
| 拓撲 | 1:1 N-Channel Low-Side Switch | 1:1 N-Channel High-Side |
| Supply Voltage Range (VDD) | 4.5 V to 28 V | — |
| Logic Reference (VIO) | 3.3 V / 5 V compatible | — |
| Communication Interface | 16-bit SPI | — |
| R_DS(on) per Channel | [DATA_NEEDED: typical R_DS(on) in mohm] | — |
| 工作溫度 | -40 °C to +150 °C (junction) | — |
| 封裝 | PG-DSO-20-88 (20-pin BFSOP with exposed pad) | PG-DSO-8 (exposed pad) |
| 安裝類型 | Surface Mount | Surface Mount |
| Protection Features | Over-current, Over-temperature, Over-load, short-to-ground, open-load detection | — |
| Diagnostic Output | SPI status registers (per-channel fault flags) | — |
| Automotive Qualification | AEC-Q100 qualified (automotive grade) | — |
| MSL 等級 | MSL3 (per JEDEC J-STD-020) | — |
| RoHS / Lead-Free | RoHS compliant, lead-free | — |
| Reset Pin (RESN) | Active-low with configurable reset duration | — |
| Maximum Continuous Load Current | — | 2 A |
| On-State Resistance RDS(on) | — | [DATA_NEEDED: RDS(on) typical value] |
| Operating Supply Voltage Range | — | [DATA_NEEDED: VBB min/max] |
| Overvoltage Protection (Load Dump) | — | Yes |
| Overload Protection | — | Yes |
| Current Limitation | — | Yes |
| Short Circuit Protection | — | Yes |
| Thermal Shutdown with Restart | — | Yes |
| Reverse Battery Protection | — | Yes |
| Fast Demagnetization of Inductive Loads | — | Yes |
| Status / Diagnostic Output | — | Yes |
| 工作溫度範圍 | — | [DATA_NEEDED: Tj range] |
| RoHS 狀態 | — | Compliant |
| AEC-Q100 Qualification | — | Yes (Automotive Grade) |