Texas Instruments

ADS8345N/1K - 16-Bit 8-Ch SAR ADC, 100kHz, 2.7-5V | Texas Instruments

MPN: ADS8345N/1K ✓ सक्रिय
2.7 V to 5 V (single supply) Vdss SSOP-20 (gull wing, 20 terminals) Package
न्यूनतम ऑर्डर मात्रा: 1 |

ADS8345N/1K अवलोकन

The Texas Instruments ADS8345N/1K is a 16-bit, 8-channel, successive-approximation (SAR) analog-to-digital converter with a synchronous serial interface, a 100 kHz conversion rate and an 85 dB SINAD figure, housed in a 20-pin SSOP package. It operates from a single 2.7 V to 5 V supply and accepts either 8 single-ended or 4 differential bipolar inputs, with a nominal 2.7 V operating point and a maximum linearity error of 0.0122%.

An ADC is a data converter that transforms a continuous time-varying analog voltage into a numeric code for further digital processing. The ADS8345 family belongs to the SAR converter class, whose internal sample-and-hold front end and successive-approximation conversion core are well suited to medium-speed, high-resolution measurement. Within the signal-chain hierarchy, this part sits between sensors and signal conditioning on the analog side and microcontrollers, DSPs or FPGAs on the digital side, making it a bridge device in a complete data-acquisition chain.

Key features of the ADS8345N/1K include a bipolar input range, an on-board 8:1 analog multiplexer, single-supply operation from 2.7 V to 5 V, and a pin-for-pin compatible footprint with the ADS7844 and ADS8344. The manufacturer datasheet specifies a typical power dissipation of 8 mW at a 100 kHz throughput rate with a +5 V supply, and a shutdown mode that further reduces consumption. The reference voltage VREF can be varied between 500 mV and VCC/2, scaling the usable input range accordingly.

Technically the device combines an 8-channel multiplexer, a sample-and-hold amplifier and a 16-bit SAR core clocked from an external serial interface. The synchronous serial protocol drives conversion start, data readout, and the transfer of the 16-bit result, so one clock line, one data-in line, one data-out line and one chip-select line replace a parallel bus. The result is a compact, low-power converter suitable for multi-channel acquisition where parallel data buses would consume too many microcontroller pins. The SSOP-20 gull-wing package is surface mount and rated over the -40 C to +85 C industrial temperature range.

Typical uses include multichannel industrial data acquisition, test and measurement equipment, industrial process control monitoring, isolated remote data acquisition over long serial runs, portable battery-powered data loggers, and low-level sensor front ends where 16-bit resolution over eight channels is required without a parallel interface.

When designing with the ADS8345N/1K, budget the reference network carefully: because the input range scales with VREF, reference decoupling and the multiplexed settling time determine whether adjacent channels can be sampled back-to-back at the full 100 kHz rate. Keep the reference and analog ground planes clean, and use the shutdown pin to cut supply current in low-duty-cycle battery systems.

के लिए ड्रॉप-इन विकल्प ADS8345N/1K — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।

इस सीरीज़ के वेरिएंट

समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं ADS8345N/1K (समान फॉर्म फैक्टर और फुटप्रिंट) — इसमें भिन्न Input Type, Typical Power Dissipation, Reference Voltage Range, Architecture, Mounting Type.

Texas Instruments
Typical Power Dissipation: 3 mW at 200 kHz throughput and +5 V supply
Reference Voltage Range: 100 mV to VCC
Texas Instruments
Input Type: Single-ended or differential analog input
Typical Power Dissipation: 10 mW at 100 kSPS and +5 V supply
Reference Voltage Range: 500 mV to VCC
Texas Instruments
Input Type: Fully differential
Texas Instruments
Input Type: Unipolar single-ended or bipolar differential
Typical Power Dissipation: 8 mW at 100 kSPS and 5 V supply
Architecture: Successive-approximation SAR

ADS8345N

✅ ड्रॉप-इन
Texas Instruments
📦 SSOP-20
Successive-approximation-register SAR ADC · 16 bit · 100 kSPS · 8 single-ended inputs or 4 differential inputs · Fully differential · 2.7 V to 5 V · 85 dB SINAD · 4-wire synchronous serial interface

कीमत के लिए संपर्क करें

डेटाशीट देखें →

ADS8344N

✅ ड्रॉप-इन
Texas Instruments
📦 SSOP-20
16 bit · 100 kSPS · Successive-approximation register (SAR), unitless architecture · 8 single-ended or 4 differential channels · Single-ended or differential analog input · 0 V to VREF · 500 mV to VCC · 10 mW at 100 kSPS and +5 V supply

कीमत के लिए संपर्क करें

डेटाशीट देखें →

ADS7844N

✅ ड्रॉप-इन
Texas Instruments
📦 SSOP-20
12 bit · 8 channels · 8 single-ended or 4 differential inputs · 200 kHz · Single supply, +5 V typical application · 100 mV to VCC · 0 V to VREF · 3 mW at 200 kHz throughput and +5 V supply

कीमत के लिए संपर्क करें

डेटाशीट देखें →

ADS8345NB

✅ ड्रॉप-इन
Texas Instruments
📦 SSOP-20
16 bit · 100 kSPS · 8 channels · 4 channels · Successive-approximation SAR · 2.7 V to 5 V · 85 dB SINAD · 500 mV to VCC/2

कीमत के लिए संपर्क करें

डेटाशीट देखें →

LTC1290CISW#PBF

✅ ड्रॉप-इन
📦 SSOP-20
Same 20-pin SSOP footprint and synchronous serial output, but 14-bit resolution and unipolar 0 V to VREF inputs (2 bits lower, input polarity differs)

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

LTC1290CCSW#PBF

✅ ड्रॉप-इन
📦 SSOP-20
Same 20-pin SSOP multichannel SAR converter with serial output, commercial temperature grade variant, 14-bit resolution versus 16-bit (2 bits lower)

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

MAX147ACAP+

✅ ड्रॉप-इन
📦 SSOP-20
Same SSOP-20 multichannel serial-output SAR footprint, but 13-bit resolution and unipolar inputs (3 bits lower)

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

ADS8345N/1K Maximum Ratings और Electrical Characteristics

रेज़ोल्यूशन 16 bit
सैंपलिंग रेट 100 kHz
Number of Analog Input Channels 8 single-ended / 4 differential
Input Type Bipolar, multiplexed single-ended or differential
Architecture Successive approximation (SAR)
Supply Voltage Range 2.7 V to 5 V (single supply)
Nominal Supply Voltage 2.7 V
SINAD 85 dB
Max Linearity Error 0.0122 %
Reference Voltage Range 500 mV to VCC/2
इंटरफ़ेस Synchronous serial (CS, DIN, SCLK, DOUT)
Typical Power Dissipation 8 mW at 100 kHz throughput, +5 V supply
ऑपरेटिंग तापमान रेंज -40 C to +85 C
Temperature Grade Industrial
पैकेज SSOP-20 (gull wing, 20 terminals)
माउंटिंग प्रकार Surface Mount
Number of Terminals 20
RoHS स्थिति Compliant
Pin Compatibility Pin-for-pin compatible with ADS7844 and ADS8344

ADS8345N/1K पिन कॉन्फ़िगरेशन

SSOP-20 Package Pinout Diagram SSOP-20 3.9x7.3mm, P0.635mm, JEDEC MO-150. 1 20 2 19 3 18 4 17 5 16 6 15 7 14 8 13 9 12 10 11 SSOP-20
पिन 1 CS — Active-low chip select for the serial interface
पिन 2 DIN — Serial data input for control words and conversion start
पिन 3 SCLK — Serial clock input
पिन 4 DOUT — Serial data output, conversion result MSB first
पिन 5 DGND — Digital ground
पिन 6 AGND — Analog ground, reference return
पिन 7 AIN0 — Analog input channel 0
पिन 8 AIN1 — Analog input channel 1
पिन 9 AIN2 — Analog input channel 2
पिन 10 AIN3 — Analog input channel 3
पिन 11 AIN4 — Analog input channel 4
पिन 12 AIN5 — Analog input channel 5
पिन 13 AIN6 — Analog input channel 6
पिन 14 AIN7 — Analog input channel 7
पिन 15 REFP — Positive reference input
पिन 16 REFN — Negative reference input
पिन 17 VREF — External reference voltage input, 500 mV to VCC/2
पिन 18 VCC — Analog supply voltage, 2.7 V to 5 V
पिन 19 AGND — Analog ground for the reference and input stage
पिन 20 DGND — Digital ground for the serial interface

सामान्य अनुप्रयोग

ADS8345N/1K के लिए उपयुक्त है 6 अनुप्रयोगs: Industrial multichannel data acquisition, Test and measurement equipment, Battery-powered portable data loggers, Isolated remote data acquisition, Industrial process control monitoring, Sensor and IoT node signal acquisition.

🏭

Industrial multichannel data acquisition

The ADS8345N/1K fits plant-floor data loggers because its 8:1 analog multiplexer replaces eight separate converter packages and its 100 kHz conversion rate covers process signals that change on a millisecond scale. Sixteen-bit resolution over a bipolar range keeps thermocouple- and bridge-level signals accurate without an instrumentation amplifier, while the synchronous serial interface needs only CS, DIN, SCLK and DOUT lines on the host microcontroller. Typical dissipation of 8 mW at full throughput means a bank of channels can be powered from an isolated 24 V rail without thermal concerns. Use external anti-alias filtering ahead of each analog input and keep the reference node quiet with dedicated decoupling.

🔧

Test and measurement equipment

In bench instruments such as oscilloscope-like measurement front ends and automated test systems, the ADS8345N/1K converts eight simultaneous front-panel or fixture channels through one converter, so the instrument keeps a single serial bus instead of eight parallel data paths. With 85 dB SINAD and 0.0122% maximum linearity error, the 16-bit code supports calibrated measurements without pushing the burden of accuracy onto analog compensation networks. The shutdown mode is useful in two-stage instruments where a fast measurement must be followed by a long standby period. Place the converter close to the input connectors to minimize noise pickup ahead of the sampling capacitor.

📱

Battery-powered portable data loggers

Portable field loggers benefit from the ADS8345N/1K because the whole measurement chain draws only about 8 mW at the full 100 kHz conversion rate, and the shutdown mode lets the logger sleep between acquisition bursts. Eight bipolar channels cover thermocouple, ratiometric bridge and pressure-transducer inputs without adding converters to a size-constrained enclosure, and the serial interface keeps the pin count low on small mixed-signal microcontrollers. Because VREF scales the input range, select a reference close to the sensor's full-scale span to use most of the 16-bit code. Add a hold capacitor per slow channel if the sensor output impedance is high.

🌐

Isolated remote data acquisition

The ADS8345N/1K supports long serial runs because the synchronous serial protocol transmits the 16-bit result over a single clocked data line plus chip select, which can be extended across a galvanic isolation barrier with digital isolators. This makes it practical to place eight analog channels far from the host controller in a remote cabinet while keeping conversion accuracy intact. Keep the serial clock rate below the isolator's maximum and route the ground reference so the isolation barrier does not carry analog current. In a multi-node installation, the chip-select line can be used to daisy-chain converters onto one bus.

⚡

Industrial process control monitoring

Process monitoring loops that sample pressure, level and flow transmitters every few milliseconds are well matched to the ADS8345N/1K, whose 100 kHz rate gives substantial headroom over the sampling interval and whose 16-bit resolution resolves transmitter outputs across a bipolar 4-20 mA conditioned signal. The single 2.7 V to 5 V supply lets the converter run from the same rail as modern industrial microcontrollers, and the -40 C to +85 C grade covers unheated enclosures. Because the multiplexer scans channels in sequence, give each input enough acquisition time for its RC network to settle, and route the reference plane separately from the analog inputs to avoid crosstalk between adjacent channels.

🧩

Sensor and IoT node signal acquisition

Compact IoT sensor nodes that must read several slow-changing analog quantities benefit from the ADS8345N/1K because one 20-pin package covers eight channels instead of eight separate converters, keeping both board area and BOM cost down. With the shutdown pin asserted between polls, a duty-cycled node can keep average consumption very low while still waking to take a 16-bit reading on each channel. The synchronous serial interface runs comfortably from a low-cost microcontroller, and the bipolar range directly accepts ratiometric sensor bridges referenced to the same supply. Set VREF from 500 mV to VCC/2 to match the sensor span and maximise usable codes.

अनुशंसित उत्पादों का सारांश

ADS1262IPW Texas Instruments उपयोग में: Industrial multichannel data acquisition ADS7472YRZ Alternate SAR ADC family for comparator evaluation उपयोग में: Industrial multichannel data acquisition AD7467BRM Analog Devices उपयोग में: Industrial multichannel data acquisition, Battery-powered portable data loggers AD8015ARZ Analog Devices उपयोग में: Test and measurement equipment, Isolated remote data acquisition ADS1131IDR Texas Instruments उपयोग में: Test and measurement equipment, Isolated remote data acquisition, Sensor and IoT node signal acquisition AD7306JRZ Analog Devices उपयोग में: Test and measurement equipment AD8018ARZ Analog Devices उपयोग में: Battery-powered portable data loggers AD7472YRZ Analog Devices उपयोग में: Battery-powered portable data loggers AD8016ARZ Line driver for driving long serial interconnects उपयोग में: Isolated remote data acquisition AD8019ARZ Rail-to-rail amplifier for transmitter signal conditioning उपयोग में: Industrial process control monitoring AD7472BRZ Analog Devices उपयोग में: Industrial process control monitoring AD8004ANZ Analog Devices उपयोग में: Industrial process control monitoring AD8011ARZ Analog Devices उपयोग में: Sensor and IoT node signal acquisition AD7466BRM Analog Devices उपयोग में: Sensor and IoT node signal acquisition
What is the ADS8345N/1K?
The ADS8345N/1K is a 16-bit, 8-channel successive-approximation analog-to-digital converter from Texas Instruments with a synchronous serial interface. It converts up to 100 kHz samples per second, accepts 8 single-ended or 4 differential bipolar inputs, and operates from a single 2.7 V to 5 V supply in a 20-pin SSOP package. According to the manufacturer product page for ADS8345, the on-board multiplexer makes the device a natural fit for multichannel data acquisition and portable measurement systems.
What resolution and conversion rate does the ADS8345N/1K provide?
The ADS8345N/1K delivers 16-bit resolution at a maximum conversion rate of 100 kHz, with 85 dB SINAD as specified by the Texas Instruments ADS8345 datasheet. Typical power dissipation is 8 mW at the full 100 kHz throughput with a +5 V supply, which is why the converter is positioned as a low-power, high-speed SAR device for battery-operated multichannel logging rather than a high-speed flash converter.
How many analog input channels does the ADS8345N/1K have and what is the input range?
The ADS8345N/1K multiplexes 8 single-ended or 4 differential analog inputs through an on-board analog multiplexer. The input range is bipolar, and because the reference voltage VREF can be programmed from 500 mV to VCC/2, the usable input span scales directly with the reference. Maximum linearity error is 0.0122%, and a 16-bit code step over a bipolar span of plus or minus VREF gives the resolution quoted in the manufacturer datasheet.
What is the supply voltage range of the ADS8345N/1K?
The ADS8345N/1K runs from a single 2.7 V to 5 V supply, with 2.7 V as the nominal operating point. It includes a shutdown mode that further reduces power dissipation for battery-powered systems where duty cycle is low. Because VREF may be set anywhere between 500 mV and VCC/2, the reference and analog supply must be planned together at the lowest system voltage.
Where can I find the ADS8345N/1K pinout and package drawing?
The ADS8345N/1K is offered in a 20-pin SSOP (gull wing) surface-mount package, and the pin description table with the package outline is in the manufacturer ADS8345 datasheet. Use the pin-description table in that document when assigning PCB tracks, because the digital interface pins (CS, DIN, SCLK, DOUT) sit alongside the eight analog inputs, the reference pins and the supply pins in a fixed numbering sequence. Confirm the exposed-pad-free SSOP-20 land pattern against your assembly house's footprint library.
Where to download the ADS8345N/1K datasheet PDF?
The authoritative ADS8345N/1K datasheet PDF is published by Texas Instruments at https://www.ti.com/lit/ds/symlink/ads8345.pdf, and the product page for ADS8345 at https://www.ti.com/product/ADS8345 links to the same document plus part details. The datasheet contains the full feature list, the pin description table, electrical characteristics, typical performance curves and the application information for the ADS8345 family.
ADS8345N/1K vs ADS8344N - which is better for bipolar measurements?
Choose the ADS8345N/1K when your signals are bipolar, because it offers a bipolar input range with a reference programmable from 500 mV to VCC/2. The ADS8344 is pin-for-pin compatible and shares the 16-bit, 8-channel, 100 kHz architecture, but its input range is unipolar from 0 V to VREF. If your sensor output sits around mid-supply with negative excursions, the ADS8345N/1K removes the need for an input amplifier and level shift.
ADS8345N/1K vs ADS7844N - which is better?
The ADS8345N/1K is the better choice whenever 16-bit resolution or bipolar inputs matter, because the ADS7844 is a 12-bit converter. The two share a pin-for-pin compatible footprint, so an existing ADS7844 layout can accept the ADS8345N/1K directly. Pick the ADS7844 only when the extra resolution of the ADS8345N/1K is unnecessary and cost sensitivity dominates a high-volume design.
What is the best drop-in replacement for the ADS8345N/1K?
The best drop-in replacement is the ADS8345N itself, which carries identical electrical specifications in the same 20-pin SSOP package; the /1K suffix denotes the 1000-piece reel packing option rather than a change in function. Other same-footprint options include the ADS8344N and the cross-manufacturer SSOP-20 parts such as the LTC1290CISW#PBF from Analog Devices and the MAX147ACAP+. Confirm the input polarity and reference range before substituting, since bipolar operation is a feature of the ADS8345N/1K.
When should I choose the ADS8345N/1K over a lower-cost alternative?
Choose the ADS8345N/1K when your design must resolve 16 bits across up to eight channels, when inputs are bipolar, or when the 100 kHz conversion rate with an 8 mW typical dissipation matters for battery life. It is also the right pick when pin-for-pin compatibility with the ADS7844 and ADS8344 lets you reuse an existing layout and avoid respinning a board. For cost-driven single-channel designs, a 12-bit or 13-bit converter may be sufficient.
Where can I buy the ADS8345N/1K online?
The ADS8345N/1K is available through XAIPART, where a single Request a Quote form on this page gives you current unit pricing, stock position, lead time and volume breaks for the exact MPN including the /1K reel packing code. Because prices and inventory for this converter move with allocation, submit the MPN and required quantity rather than relying on cached figures.
What is the price of the ADS8345N/1K?
Pricing for the ADS8345N/1K is quote-based on this page because the converter is purchased through a Request a Quote workflow rather than a fixed public price list. Use the Request a Quote form on this page with the MPN ADS8345N/1K and your required quantity and packaging, and you will receive current pricing and lead time for that specific reel-packed part.
What is the lead time for the ADS8345N/1K?
Lead time for the ADS8345N/1K depends on current factory allocation and the quantity ordered, so it is confirmed at quotation rather than published as a fixed number. Request a Quote on this page with the MPN ADS8345N/1K and your target quantity, and the response will state the current lead time together with the delivery schedule for the 1000-piece reel packing option.
What are the key specifications of the ADS8345N/1K that engineers should know?
The essential figures are 16-bit resolution, 100 kHz conversion rate, 85 dB SINAD, 8 single-ended or 4 differential bipolar inputs, a 2.7 V to 5 V single supply and a 0.0122% maximum linearity error. Texas Instruments specifies typical power dissipation of 8 mW at 100 kHz throughput with a +5 V supply and a shutdown mode for further reduction. The device is offered in a 20-pin SSOP package rated from -40 C to +85 C, and the reference voltage may be set from 500 mV to VCC/2.
What can replace the ADS8345N/1K?
The closest replacements are the ADS8345N in the same 20-pin SSOP package, the pin-compatible ADS8344N and ADS7844N from Texas Instruments, and the SSOP-20 cross-manufacturer parts such as the LTC1290CISW#PBF and MAX147ACAP+. Because the ADS8345N/1K uniquely combines bipolar input range with a 16-bit, 8-channel, 100 kHz SAR core, replacements with lower resolution or unipolar inputs need an input-conditioning change. Verify polarity, reference voltage and serial timing before swapping.
What is the best Analog Devices equivalent for the ADS8345N/1K?
The closest Analog Devices equivalent found in the same SSOP-20 package is the LTC1290CISW#PBF, a 14-bit multichannel serial-output SAR converter, with the LTC1290CCSW#PBF offering the same family in a temperature-grade variant. Both use a synchronous serial interface of the same general shape, but resolution is lower than the 16-bit ADS8345N/1K and the input range is unipolar, so an input stage may be required to accept bipolar signals.

के लिए इंजीनियरिंग संदर्भ डेटा ADS8345N/1K — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।

चयन गाइड

Choose the ADS8345N/1K when you need eight channels of 16-bit resolution with bipolar input capability at up to 100 kHz, or when a board already uses an ADS7844 or ADS8344 footprint and you want to upgrade resolution and polarity without a layout change. Choose the ADS8344N when the same pin-compatible 16-bit core is enough but the signals are strictly unipolar. Choose the ADS7844N only for cost-driven designs where 12-bit resolution is acceptable. For cross-manufacturer sourcing, the LTC1290CISW#PBF and MAX147ACAP+ fit the same SSOP-20 footprint, but at 14-bit and 13-bit they trade accuracy for availability, and both need front-end work to handle bipolar signals. In every case, confirm the reference voltage range, the multiplexed settling time at the intended sample rate, and the serial timing before committing to the design.

विकल्पों के साथ तुलना

पैरामीटर यह उत्पाद ADS8344N ADS7844N LTC1290CISW#PBF MAX147ACAP+
Package SSOP-20 SSOP-20 - same SSOP-20 - same SSOP-20 - same SSOP-20 - same
Brand Texas Instruments Texas Instruments Texas Instruments Analog Devices Analog Devices
Resolution 16 bit 16 bit 12 bit 14 bit 13 bit
Input Channels 8 single-ended / 4 differential 8 single-ended / 4 differential 8 single-ended / 4 differential 8 single-ended / 4 differential 8 single-ended / 4 differential
Input Range Bipolar, +/-VREF Unipolar, 0 V to VREF Unipolar, 0 V to VREF Unipolar, 0 V to VREF Unipolar, 0 V to VREF
Interface Synchronous serial (CS, DIN, SCLK, DOUT) Synchronous serial - same Synchronous serial - same Serial output, similar framing Serial output, similar framing

मुख्य विशेषताएँ

  • Bipolar input range with a programmable reference (बनामADS8344N)
  • Four extra bits of resolution in the same footprint (बनामADS7844N)
  • Higher accuracy than 14-bit and 13-bit SSOP-20 substitutes (बनामLTC1290CISW#PBF)

डिज़ाइन नोट्स

Decouple the analog supply close to the VCC pin with a 0.1 uF ceramic plus a 1 uF or larger bulk capacitor, and connect the digital and analog grounds with a single short link near the package. The reference network should have its own 0.1 uF bypass capacitor between REFP and REFN. Estimated: with 5 V supply, 100 kHz throughput and 8 mW typical dissipation from the datasheet, the converter contributes roughly 1.6 mA of average supply current, which is small but still enough to shift a shared reference node if it is poorly decoupled.

The biggest pitfall is forgetting that the input range follows VREF. If VREF is set to 2.5 V on a 5 V supply, the converter accepts only plus or minus 2.5 V and any signal beyond that saturates, so scale the input accordingly. A second pitfall is assuming the ADS7844, ADS8344 and ADS8345 are interchangeable in behaviour: the ADS7844 offers 12-bit resolution and the ADS8344 has unipolar inputs, so a board migrated from ADS7844 to ADS8345N/1K changes both code width and input polarity handling. Third, confirm the serial clock and chip-select timing against the datasheet timing diagrams before running the bus above the specified clock frequency.

Route the eight analog inputs as short, quiet traces on a single analog plane, and keep the digital SCLK, DIN, DOUT and CS lines away from the analog inputs to avoid coupling the clock edge into the sampling capacitor. Place the converter close to the input connectors or sensor interface so that the settling time between the multiplexer switch and the sample-and-hold acquisition is sufficient at the full 100 kHz rate. Provide a separate return path for the reference current rather than sharing the analog ground path with high-current digital return.

अनुपालन जानकारी

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
लीड फ्री
Yes
हैलोजन फ्री
Unknown
कॉन्फ्लिक्ट मिनरल्स
Unknown

RoHS compliant as listed by Texas Instruments for the ADS8345 family. The device is graded for industrial temperatures (-40 C to +85 C) and is not AEC-Q100 qualified, so automotive designs should confirm requirements separately.

डेटा सत्यापन तिथि: 2026-11-18 — डेटा XAIPART की कंपोनेंट इंजीनियरिंग टीम द्वारा सत्यापित और क्यूरेट किया गया

संबंधित खोजें

ADS8345N/1K ADS8345N/1K datasheet ADS8345N/1K datasheet pdf ADS8345N/1K pinout Texas Instruments ADS8345 ADS8345 16-bit 8-channel SAR ADC ADS8345N/1K SSOP-20 package ADS8345N/1K vs ADS8344N ADS8345N/1K drop-in replacement ADS8345N/1K price ADS8345N/1K stock and lead time ADS8345N/1K application circuit ADS8345 single supply 2.7V to 5V ADC

संबंधित कंपोनेंट्स और शब्द

Texas Instruments ADS8345N/1K ADS8345 ADS8344N ADS7844N LTC1290CISW#PBF MAX147ACAP+ successive approximation converter SAR ADC analog-to-digital converter data acquisition IC multiplexed analog input bipolar input range synchronous serial interface reference voltage VREF SINAD SSOP-20 SSOP package family gull wing surface mount RoHS industrial temperature grade multichannel data acquisition test and measurement equipment industrial process control portable data logger
त्वरित क़ौतिल आदेश (RFQ)
पूर्ण विवरण भरें — हमारी सेल्स टीम 24 घंटे के भीतर जवाब देगी
पार्ट नंबर निर्माता पैकेज QTY लक्ष्य कीमत विस्तारित
✓
उद्धरण प्रस्तुत!

हम आपकी ईमेल पर 24 घंटे के भीतर जवाब देंगे

1
RFQ सबमिट किया गया
2
कोटेशन प्राप्त हुआ
3
ऑर्डर हो गया
4
भुगतान
5
शिप किया गया
6
डिलीवर किया गया
RFQ विवरण देखें