Analog Devices

DG409DY+T - Dual 4:1 CMOS Analog Multiplexer | Analog Devices

MPN: DG409DY+T ✓ فعال
100 ohm Rds(on) 16-pin narrow SOIC Package
MOQ: 1 |

DG409DY+T جائزہ

Analog Devices DG409DY+T is a dual 4:1 CMOS analog multiplexer with two independent 4:1 switching functions, 100 ohm on-resistance, and a 16-pin narrow SOIC package. The device routes one of four differential input pairs to each common output pair, making it suitable for signal-routing and channel-selection systems. Its tape-and-reel order code supports automated surface-mount assembly.

An analog multiplexer is an interface IC that connects one selected source channel to a common destination while electrically isolating the unselected channels. In the product hierarchy, the DG409 belongs to analog switches and multiplexers, interface ICs, and semiconductor signal-routing devices. A differential 4:1 configuration is especially useful when a system must preserve two related signal paths, such as the positive and negative sides of a differential measurement or communication channel.

The DG409 series provides two 4:1 circuits, a 100 ohm on-resistance, and improved operation as a pin-compatible upgrade for the industry-standard DG408 and DG409 devices. According to the Analog Devices DG409 documentation, the family is intended for audio-signal routing, communication systems, data acquisition, guidance and control systems, sample-and-hold circuits, and test equipment. These applications benefit from centralized selection of one of four differential sources without requiring a separate switch for every signal pair.

Internally, the DG409 uses CMOS analog switching to control the selected paths. The two address inputs associated with each multiplexer determine which of the four differential channels is connected to the common outputs. Because the device combines address-controlled routing with a 16-pin SOIC footprint, it simplifies board layouts where multiple instrument or communication channels must be scanned through a shared analog front end.

Typical uses include multiplexers in automated test systems, differential signal acquisition modules, communication-channel selectors, sample-and-hold circuits, audio routing networks, and industrial control or guidance systems. The differential architecture reduces the number of external routing components compared with handling each polarity as an unrelated single-ended signal, while the integrated two-circuit count supports two simultaneous selection functions.

PCB design should preserve the manufacturer's pinout and decoupling guidance, keep analog traces short, and provide an adequate ground return around the mux. Verify that signal amplitudes remain inside the device's electrical limits and that downstream loads do not exceed the specified switch characteristics. Because the on-resistance contributes directly to signal loss and noise, sensitive acquisition paths should account for the 100 ohm switch impedance during gain and bandwidth planning.

This page combines the confirmed family and ordering details with practical routing guidance, pin-compatible alternatives, package comparisons, and design notes. The alternatives are separated by functional equivalence and manufacturing source so engineers can identify a board-compatible replacement without confusing it with a device that merely provides similar multiplexing functionality.

کے لیے ڈراپ اِن متبادل DG409DY+T — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔

اس سیریز میں مختلف ورژن

اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں DG409DY+T (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Multiplexer Configuration, Package, Mounting Type.

Analog Devices
Multiplexer Configuration: Dual 4:1
Package: 16-SOIC
موازنہ کریں DG409DY+T →
Analog Devices
Multiplexer Configuration: 4:1
Package: 16-pin PDIP
Mounting Type: Through-hole
موازنہ کریں DG409DY+T →

DG409DY-T1-E3

✅ ڈراپ-اِن
📦 16-pin narrow SOIC
Same 2-circuit 4:1 function and 100 ohm on-resistance; 0 ohm on-resistance difference, with a different manufacturer and order code

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

DG409DY-T1

✅ ڈراپ-اِن
📦 16-pin narrow SOIC
Same documented 2-circuit 4:1 and 16-SOIC format; 0 circuit-count and 0 ohm on-resistance differences

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

DG409DYZ-T

✅ ڈراپ-اِن
📦 16-pin narrow SOIC
Same 2-circuit 4:1 function and 16-SOIC package; 0 channel-count difference, with a different manufacturer qualification code

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

DG409DY-T

✅ ڈراپ-اِن
📦 16-pin narrow SOIC
Same documented dual 4:1 architecture in 16-SOIC; 0 channel-count and 0 package differences

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

ADG409BRZ

✅ ڈراپ-اِن
📦 16-pin narrow SOIC
Same dual 4:1 differential multiplexing function and 16-pin footprint; address-enable implementation and exact electrical limits differ

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

DG409DY+T تفصیلات

Multiplexer Configuration Dual 4:1 differential
Number of Circuits 2 circuits
On-Resistance 100 ohm
پنز کی تعداد 16 pins
پیکیج 16-pin narrow SOIC
ماؤنٹنگ ٹائپ Surface mount
Process Technology CMOS
Product Family DG409 improved analog multiplexer series
Product Status Production
Order Code T tape-and-reel packaging
Differential Channel Count 4 differential channels per circuit
Common Output Count 2 common outputs for the dual configuration
Pin Compatibility Pin-compatible with industry-standard DG408 and DG409 devices

DG409DY+T 16-pin narrow soic پن کنفیگریشن گائیڈ

DG409DY+T (16-pin narrow soic پیکیج) کے لیے پن کنفیگریشن۔ پن نمبرنگ، فنکشنز اور کنکشن ڈایاگرامز مینوفیکچرر کے ڈیٹا شیٹ میں بیان کیے گئے ہیں۔ درست فٹ پرنٹ اور سولڈرنگ رہنما ہدایات کے لیے اسی سے رجوع کریں۔

DG409DY+T کے لیے 16-pin narrow soic پیکیج پن آؤٹ ڈایاگرام

کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں DG409DY+T.

رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔

عام استعمالات

DG409DY+T کے لیے موزوں ہے 6 ایپلیکیشنs: Differential Data Acquisition, Automated Test Equipment, Sample-and-Hold Signal Routing, Audio Signal Routing, Communication Channel Selection, Guidance and Control Systems.

📈

Differential Data Acquisition

The DG409DY+T suits data-acquisition front ends that must route two related signal conductors together. Each of its two independent 4:1 sections selects one of four differential inputs and connects that pair to the common outputs. With a documented 100 ohm on-resistance, the switch can sit close to the sensor or conditioning stage to avoid adding long analog traces after selection. Designers should include the switch impedance in the ADC input model, check the selected source’s settling behavior, and preserve a low-impedance reference return to minimize conversion error.

🧰

Automated Test Equipment

The DG409DY+T can reduce the number of discrete switches in automated test equipment by selecting among four differential sources with two integrated circuits. Its two 4:1 circuits allow separate measurement paths to share a common instrument front end, while the 16-pin narrow SOIC package supports compact, high-density routing. The 100 ohm series resistance must be checked against the instrument input impedance, and the address controls should be timed so that acquisition begins only after the selected channel has settled. Ground-plane continuity and short analog traces are particularly important around sensitive test nodes.

⚡

Sample-and-Hold Signal Routing

The DG409DY+T is applicable to sample-and-hold systems requiring selection of one of several differential source channels before a shared sampling stage. Its dual 4:1 organization permits two selected paths to serve different sampling or conditioning functions. Because the documented on-resistance is 100 ohm, it contributes to source impedance, capacitor charging time, and thermal noise. The circuit should therefore account for the complete switch-and-hold network when setting acquisition time and accuracy rather than evaluating the sample-and-hold capacitor alone.

🎧

Audio Signal Routing

The DG409DY+T can route differential audio-source pairs within a communication or audio system by assigning one of four inputs to each common output. The dual architecture supports two routing sections in one 16-pin SOIC package and reduces board area compared with discrete switching networks. The 100 ohm on-resistance may be acceptable for many line-level routing tasks but should be compared with the load impedance to avoid excessive attenuation. Keep the analog path compact, maintain continuous ground references, and confirm that the selected source amplitude remains within the mux’s analog signal limits.

🌐

Communication Channel Selection

The DG409DY+T is appropriate for communication systems that must choose among multiple differential channels using a shared downstream circuit. Two independent 4:1 sections allow the same multiplexer family to support more than one signal pair, while the 16-pin SOIC package simplifies routing to the communications front end. Designers should validate logic thresholds, supply sequencing, channel transition behavior, and the 100 ohm switch resistance against the receiver or converter input. Keep digital address lines away from sensitive analog nodes to reduce coupling during channel changes.

🏭

Guidance and Control Systems

The DG409DY+T can select differential sensor or feedback paths in guidance and control systems where multiple inputs feed a common processing channel. Its two 4:1 circuits provide compact routing for two functions, and the documented pin-compatible DG409 footprint supports reuse of established analog boards. Control-loop stability should be evaluated with the 100 ohm switch resistance included in the system transfer function. Practical layouts should use an uninterrupted ground plane, short output routes, and stable bypass connections to minimize switching transients and control-signal corruption.

تجویز کردہ پروڈکٹس کا خلاصہ

DG409DY+T Analog Devices استعمال ہوتا ہے: Differential Data Acquisition, Automated Test Equipment, Sample-and-Hold Signal Routing, Audio Signal Routing, Communication Channel Selection, Guidance and Control Systems ADG409BRZ Related differential multiplexer family استعمال ہوتا ہے: Differential Data Acquisition, Communication Channel Selection DG409DY-T1-E3 Pin-compatible DG409-family test mux استعمال ہوتا ہے: Automated Test Equipment, Guidance and Control Systems DG409DYZ-T Related DG409 package-compatible mux استعمال ہوتا ہے: Sample-and-Hold Signal Routing DG409DY-T DG409-family audio routing mux استعمال ہوتا ہے: Audio Signal Routing
What is DG409DY+T and what does it do?
The DG409DY+T is a dual 4:1 CMOS analog multiplexer with two independent differential switching circuits, 100 ohm on-resistance, and a 16-pin narrow SOIC package. It connects one of four differential input pairs to a common output pair in each circuit. According to the Analog Devices DG409 documentation, the family is intended for audio routing, communications, data acquisition, guidance and control, sample-and-hold circuits, and test equipment.
How many channels and circuits are in the DG409DY+T?
The DG409DY+T contains two 4:1 multiplexer circuits, giving four selectable differential channels per circuit. Each selected channel connects one differential input pair to the device's common differential output. According to the Analog Devices DG409 product documentation, the family is an improved 8-channel or dual 4-channel CMOS multiplexer design, with each functional section operating from a 4:1 analog switch arrangement.
What package and mounting style does DG409DY+T use?
The DG409DY+T uses a 16-pin narrow SOIC package designed for surface-mount assembly, and the plus suffix identifies the tape-and-reel order code. Product listings for the exact device describe it as a 2-circuit, 4:1, 100 ohm mux in 16-SOIC. Use the Analog Devices DG409 documentation for the land pattern and pin numbering before laying out or replacing the device.
Where can I download the DG409DY+T datasheet PDF?
The official DG409 family datasheet is available through the Analog Devices DG409 product page at https://www.analog.com/en/products/dg409.html. That page links to the manufacturer data sheet and provides the definitive pin assignments, electrical limits, switching characteristics, and ordering information for DG409DY+T. The DG409DY+T is the tape-and-reel member of the 16-pin SOIC DG409DY family.
Where is the DG409DY+T pinout located?
The DG409DY+T pinout is shown in the pin-configuration section of the Analog Devices DG409 family data sheet linked from the official DG409 product page. The device is a 16-pin narrow SOIC, so the drawing identifies all 16 terminals and their multiplexing functions. Use that diagram when assigning address controls, supply pins, input terminals, and common outputs; a complete terminal table is not reproduced here.
Is DG409DY+T compatible with industry-standard DG409 devices?
Yes. The Analog Devices DG409 documentation describes the improved DG409 muxes as pin-compatible plug-in upgrades for the industry-standard DG408 and DG409 devices. The DG409DY+T also retains the established 16-pin SOIC footprint and differential 4:1 architecture. This compatibility makes it suitable for repair and redesign use, although operating-temperature grade, qualification, and order-code differences must still be checked before substitution.
Can DG409DY+T replace DG408DY?
The DG409DY+T can replace DG408DY when the board requires a differential 4:1 multiplexed path and the voltage ratings, logic levels, and signal limits are acceptable. The Analog Devices DG409 documentation identifies the improved DG409 as a pin-compatible plug-in upgrade for industry-standard DG408 and DG409 devices. The DG408DY is single-ended rather than differential, so engineers must verify that each selected channel's intended signal polarity and routing arrangement matches the board.
What is the best drop-in replacement for DG409DY+T?
The DG409DY-T1-E3 is the clearest documented drop-in candidate because it retains two 4:1 circuits, 100 ohm on-resistance, and the same 16-SOIC package. The DG409DY-T1 and DG409DYZ-T also appear as 16-SOIC members of the DG409 family. According to manufacturer and distributor documentation, all use the established DG409 footprint, but temperature grade, qualification, lifecycle status, and electrical limits should be checked before production use.
DG409DY+T versus DG409DY-T1-E3: which is better?
Choose DG409DY+T when you specifically need the Analog Devices or Maxim Integrated order code and its documented production status. Choose DG409DY-T1-E3 when the Vishay Siliconix sourcing route is preferable; both are documented as two-circuit, 4:1, 100 ohm multiplexers in 16-SOIC. According to the DG409 documentation, the family is pin compatible with industry-standard DG408 and DG409 devices, but exact supply, temperature, and qualification limits still require review.
DG409DY+T versus ADG409BRZ: which fits an existing board?
The DG409DY+T is preferable for an existing industry-standard DG409 board because the manufacturer describes it as a pin-compatible upgrade. The ADG409BRZ is identified as a 4-channel differential multiplexer with address and enable controls, but its exact pin arrangement and package details must be verified against the board before substitution. According to the Analog Devices DG409 documentation, DG409DY+T retains the established DG409 footprint and is the lower-risk choice for DG409-based designs.
When should I choose DG409DY+T instead of a single-ended mux?
Choose DG409DY+T when the signal consists of two correlated conductors that must be selected together, such as positive and negative pairs in a differential acquisition or communication path. A single-ended multiplexer would require separate switching for each polarity and may increase routing complexity. The DG409DY+T provides two differential 4:1 circuits with a documented 100 ohm on-resistance and a 16-pin SOIC footprint.
Is DG409DY+T suitable for data acquisition and test equipment?
Yes, the DG409DY+T is specifically suitable for data acquisition and test equipment because it provides two differential 4:1 circuits in a compact 16-pin SOIC package. The Analog Devices DG409 documentation identifies these uses alongside audio-signal routing, communication systems, guidance and control, and sample-and-hold circuits. Its 100 ohm on-resistance should be included in the input network and noise calculations for high-impedance measurement channels.
How does the 100 ohm on-resistance affect a DG409DY+T design?
The 100 ohm on-resistance adds series resistance between the selected input and common output, creating a divider with the source impedance and downstream load. This can reduce signal amplitude and contribute thermal noise in precision measurements. According to the distributor specification for the DG409DY+T, the device is a 100 ohm, 4:1, two-circuit mux, so source impedance, ADC input capacitance, gain, and settling behavior should be evaluated together.
Where can I buy DG409DY+T and check current stock?
Use the Request a Quote form on this page to request the current DG409DY+T price, stock status, lead time, and minimum order quantity. The tape-and-reel order code is suitable for standard surface-mount production handling, but reel quantity and assembly packaging should be confirmed with the quote. This page does not present a static price because commercial availability and pricing can change without notice.
What are the key specifications of DG409DY+T that engineers should know?
The key DG409DY+T specifications are two 4:1 differential switching circuits, 100 ohm on-resistance, CMOS construction, and a 16-pin narrow SOIC package. It is a tape-and-reel order code for the DG409DY family and is identified as an improved, pin-compatible upgrade for industry-standard DG408 and DG409 devices. The device is listed in production, making the family relevant to audio routing, communications, data acquisition, and test-equipment routing.
What can replace DG409DY+T?
The DG409DY-T1-E3 is a documented board-compatible replacement candidate because it has the same two-circuit 4:1 function, 100 ohm on-resistance, and 16-SOIC package. The DG409DY-T1 and DG409DYZ-T are additional DG409-family candidates with the same documented package format. Before replacement, confirm power rails, logic thresholds, analog signal limits, temperature range, and qualification status for the specific order code.

کے لیے انجینئرنگ ریفرنس ڈیٹا DG409DY+T — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔

انتخاب کی گائیڈ

Choose DG409DY+T for a differential 4:1 routing function that must fit the established 16-pin DG409 or DG408 footprint, especially when two independent switching sections are required. Its documented 100 ohm on-resistance makes it appropriate when source impedance and downstream input impedance can tolerate that series resistance and associated thermal noise. DG409DY-T1-E3 is a practical alternative when the Vishay order code and manufacturing route are preferred, while DG409DY-T1 and DG409DYZ-T retain the documented DG409-family package format. ADG409BRZ is reasonable for a new dual 4:1 differential design, but an existing DG409 board has lower integration risk with the pin-compatible DG409DY+T. For every replacement, confirm supply voltage, logic levels, analog signal limits, operating-temperature range, qualification status, and lifecycle requirements against the manufacturer documentation.

متبادلات کے ساتھ موازنہ

پیرامیٹر یہ پروڈکٹ DG409DY-T1-E3 DG409DY-T1 DG409DYZ-T DG409DY-T ADG409BRZ
Brand Analog Devices Vishay Intertechnology Vishay Intertechnology Renesas Electronics Renesas Electronics Analog Devices
Package 16-pin narrow SOIC 16-pin narrow SOIC 16-pin narrow SOIC 16-pin narrow SOIC 16-pin narrow SOIC 16-pin narrow SOIC
Multiplexer Configuration Dual 4:1 differential Dual 4:1 differential Dual 4:1 differential Dual 4:1 differential Dual 4:1 differential Dual 4:1 differential
Number of Circuits 2 circuits 2 circuits 2 circuits 2 circuits 2 circuits 2 circuits
Number of Pins 16 pins 16 pins 16 pins 16 pins 16 pins 16 pins
Technology CMOS CMOS analog multiplexer DG409 CMOS family DG409 CMOS family DG409 CMOS family CMOS analog multiplexer
Pin Compatibility Pin-compatible upgrade for industry-standard DG408 and DG409 devices DG409-family 16-SOIC footprint DG409-family 16-SOIC footprint DG409-family 16-SOIC footprint DG409-family 16-SOIC footprint Related 4-channel differential mux
Primary Applications Audio routing, communications, data acquisition, guidance and control, sample-and-hold, and test equipment Analog signal routing and channel selection Analog signal routing and channel selection Analog signal routing and channel selection Analog signal routing and channel selection Differential signal routing

اہم امتیازی خصوصیات

  • Combines two differential selectors in one package (بمقابلہDG409DY-T1-E3)
  • Same documented 100 ohm switching impedance (بمقابلہDG409DY-T1-E3)
  • Exact 16-SOIC footprint continuity (بمقابلہADG409BRZ)
  • Production family positioning (بمقابلہDG409DY-T)

ڈیزائن نوٹس

Include the documented 100 ohm on-resistance in the complete source-to-destination model. Together with the signal source impedance and ADC or receiver input impedance, it creates an attenuation divider, while its Johnson-noise contribution can matter in high-gain measurement paths. Also account for parasitic capacitance when estimating channel settling after an address change.

Place the mux close to the shared analog destination so that the selected channel travels over a short trace. Maintain a continuous ground plane beneath and around the device, return analog currents directly to the system reference, and avoid routing the 100 ohm switch output through long copper traces. The 16-pin SOIC footprint should follow the manufacturer land pattern exactly.

Separate the address-control traces from sensitive analog inputs and outputs, particularly when several muxes share a connector or converter. Use a low-impedance ground reference and place the required bypass capacitors at the power pins according to the Analog Devices DG409 guidance. Ensure control transitions do not coincide with acquisition windows when switch settling could affect accuracy.

Do not treat the DG409DY+T as a single-ended mux merely because it uses a 16-pin package. Each functional section selects one of four differential pairs, and its positive and negative terminals must be assigned according to the manufacturer pin diagram. Verify supply voltage, logic thresholds, analog signal limits, temperature grade, and qualification before substituting another order code.

تعمیل کی معلومات

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
لیڈ فری
Unknown
ہیلوجن فری
Unknown
کنفلیکٹ منرلز
Unknown

The device is an industrial/communications interface IC rather than an automotive-qualified product, but no specific RoHS, REACH, lead-free, or halogen-free declaration was confirmed.

ڈیٹا کی تصدیق کی تاریخ: 2026-11-16 — ڈیٹا XAIPART کی کمپوننٹ انجینئرنگ ٹیم کے ذریعے تصدیق شدہ اور ترتیب شدہ

متعلقہ تلاشیں

DG409DY+T datasheet DG409DY+T pinout DG409DY+T datasheet pdf DG409DY+T equivalent DG409DY+T replacement DG409DY+T cross reference DG409DY+T vs DG409DY-T1-E3 DG409DY+T footprint DG409DY+T application circuit Analog Devices DG409DY+T DG409DY+T 16 SOIC mux DG409DY+T 100 ohm multiplexer DG409DY+T price DG409DY+T stock

متعلقہ اجزاء اور اصطلاحات

Analog Devices DG409DY+T DG409DY-T1-E3 DG409DY-T1 DG409DYZ-T DG409DY-T ADG409BRZ DG408 DG409 analog multiplexer analog switch interface IC CMOS dual 4:1 differential multiplexer 16-pin narrow SOIC SOIC family surface-mount package 100 ohm on-resistance differential signal routing data acquisition sample-and-hold circuit test equipment audio signal routing communication system
فوری کوٹ RFQ
مکمل تفصیلات بھریں — ہماری سیلز ٹیم 24 گھنٹوں میں جواب دے گی
پارٹ نمبر مینوفیکچرر پیکج QTY ہدف قیمت کل رقم
✓
کوٹ جمع ہو گیا!

ہم 24 گھنٹوں کے اندر آپ کے ای میل کا جواب دیں گے

1
RFQ جمع ہو گیا
2
کوٹ موصول ہو گیا
3
آرڈر دے دیا گیا
4
ادائیگی
5
بھیج دیا گیا
6
ڈیلیور شدہ
RFQ تفصیلات دیکھیں