DG409DY+T - Dual 4:1 CMOS Analog Multiplexer | Analog Devices
料号: DG409DY+T ✓ 量产中DG409DY+T 概述
An analog multiplexer is an interface IC that connects one selected source channel to a common destination while electrically isolating the unselected channels. In the product hierarchy, the DG409 belongs to analog switches and multiplexers, interface ICs, and semiconductor signal-routing devices. A differential 4:1 configuration is especially useful when a system must preserve two related signal paths, such as the positive and negative sides of a differential measurement or communication channel.
The DG409 series provides two 4:1 circuits, a 100 ohm on-resistance, and improved operation as a pin-compatible upgrade for the industry-standard DG408 and DG409 devices. According to the Analog Devices DG409 documentation, the family is intended for audio-signal routing, communication systems, data acquisition, guidance and control systems, sample-and-hold circuits, and test equipment. These applications benefit from centralized selection of one of four differential sources without requiring a separate switch for every signal pair.
Internally, the DG409 uses CMOS analog switching to control the selected paths. The two address inputs associated with each multiplexer determine which of the four differential channels is connected to the common outputs. Because the device combines address-controlled routing with a 16-pin SOIC footprint, it simplifies board layouts where multiple instrument or communication channels must be scanned through a shared analog front end.
Typical uses include multiplexers in automated test systems, differential signal acquisition modules, communication-channel selectors, sample-and-hold circuits, audio routing networks, and industrial control or guidance systems. The differential architecture reduces the number of external routing components compared with handling each polarity as an unrelated single-ended signal, while the integrated two-circuit count supports two simultaneous selection functions.
PCB design should preserve the manufacturer's pinout and decoupling guidance, keep analog traces short, and provide an adequate ground return around the mux. Verify that signal amplitudes remain inside the device's electrical limits and that downstream loads do not exceed the specified switch characteristics. Because the on-resistance contributes directly to signal loss and noise, sensitive acquisition paths should account for the 100 ohm switch impedance during gain and bandwidth planning.
This page combines the confirmed family and ordering details with practical routing guidance, pin-compatible alternatives, package comparisons, and design notes. The alternatives are separated by functional equivalence and manufacturing source so engineers can identify a board-compatible replacement without confusing it with a device that merely provides similar multiplexing functionality.
直接替换替代料: DG409DY+T ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: DG409DY+T (相同外形与封装尺寸) ——差异在于 Multiplexer Configuration, Package, Mounting Type.
DG409DY-T1-E3
✅ 直接替换📋 参考替代料(不在目录中)
DG409DY-T1
✅ 直接替换📋 参考替代料(不在目录中)
DG409DYZ-T
✅ 直接替换📋 参考替代料(不在目录中)
DG409DY-T
✅ 直接替换📋 参考替代料(不在目录中)
ADG409BRZ
✅ 直接替换📋 参考替代料(不在目录中)
DG409DY+T 规格参数
| Multiplexer Configuration | Dual 4:1 differential |
| Number of Circuits | 2 circuits |
| On-Resistance | 100 ohm |
| 引脚数 | 16 pins |
| 封装 | 16-pin narrow SOIC |
| 安装类型 | Surface mount |
| Process Technology | CMOS |
| Product Family | DG409 improved analog multiplexer series |
| Product Status | Production |
| Order Code | T tape-and-reel packaging |
| Differential Channel Count | 4 differential channels per circuit |
| Common Output Count | 2 common outputs for the dual configuration |
| Pin Compatibility | Pin-compatible with industry-standard DG408 and DG409 devices |
DG409DY+T 16-pin narrow soic 引脚配置指南
DG409DY+T(16-pin narrow soic 封装)的引脚配置。 引脚编号、功能和连接图在制造商数据手册中定义。请参阅该手册以了解确切的封装尺寸和焊接指南。
暂无详细引脚数据: DG409DY+T.
请参阅 数据手册 以查看完整引脚配置。
典型应用
DG409DY+T 适用于 6 应用s: Differential Data Acquisition, Automated Test Equipment, Sample-and-Hold Signal Routing, Audio Signal Routing, Communication Channel Selection, Guidance and Control Systems.
Differential Data Acquisition
The DG409DY+T suits data-acquisition front ends that must route two related signal conductors together. Each of its two independent 4:1 sections selects one of four differential inputs and connects that pair to the common outputs. With a documented 100 ohm on-resistance, the switch can sit close to the sensor or conditioning stage to avoid adding long analog traces after selection. Designers should include the switch impedance in the ADC input model, check the selected source’s settling behavior, and preserve a low-impedance reference return to minimize conversion error.
推荐
Automated Test Equipment
The DG409DY+T can reduce the number of discrete switches in automated test equipment by selecting among four differential sources with two integrated circuits. Its two 4:1 circuits allow separate measurement paths to share a common instrument front end, while the 16-pin narrow SOIC package supports compact, high-density routing. The 100 ohm series resistance must be checked against the instrument input impedance, and the address controls should be timed so that acquisition begins only after the selected channel has settled. Ground-plane continuity and short analog traces are particularly important around sensitive test nodes.
推荐
Sample-and-Hold Signal Routing
The DG409DY+T is applicable to sample-and-hold systems requiring selection of one of several differential source channels before a shared sampling stage. Its dual 4:1 organization permits two selected paths to serve different sampling or conditioning functions. Because the documented on-resistance is 100 ohm, it contributes to source impedance, capacitor charging time, and thermal noise. The circuit should therefore account for the complete switch-and-hold network when setting acquisition time and accuracy rather than evaluating the sample-and-hold capacitor alone.
推荐
Audio Signal Routing
The DG409DY+T can route differential audio-source pairs within a communication or audio system by assigning one of four inputs to each common output. The dual architecture supports two routing sections in one 16-pin SOIC package and reduces board area compared with discrete switching networks. The 100 ohm on-resistance may be acceptable for many line-level routing tasks but should be compared with the load impedance to avoid excessive attenuation. Keep the analog path compact, maintain continuous ground references, and confirm that the selected source amplitude remains within the mux’s analog signal limits.
推荐
Communication Channel Selection
The DG409DY+T is appropriate for communication systems that must choose among multiple differential channels using a shared downstream circuit. Two independent 4:1 sections allow the same multiplexer family to support more than one signal pair, while the 16-pin SOIC package simplifies routing to the communications front end. Designers should validate logic thresholds, supply sequencing, channel transition behavior, and the 100 ohm switch resistance against the receiver or converter input. Keep digital address lines away from sensitive analog nodes to reduce coupling during channel changes.
推荐
Guidance and Control Systems
The DG409DY+T can select differential sensor or feedback paths in guidance and control systems where multiple inputs feed a common processing channel. Its two 4:1 circuits provide compact routing for two functions, and the documented pin-compatible DG409 footprint supports reuse of established analog boards. Control-loop stability should be evaluated with the 100 ohm switch resistance included in the system transfer function. Practical layouts should use an uninterrupted ground plane, short output routes, and stable bypass connections to minimize switching transients and control-signal corruption.
推荐
推荐产品汇总
工程参考数据: DG409DY+T ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | DG409DY-T1-E3 | DG409DY-T1 | DG409DYZ-T | DG409DY-T | ADG409BRZ |
|---|---|---|---|---|---|---|
| Brand | Analog Devices | Vishay Intertechnology | Vishay Intertechnology | Renesas Electronics | Renesas Electronics | Analog Devices |
| Package | 16-pin narrow SOIC | 16-pin narrow SOIC | 16-pin narrow SOIC | 16-pin narrow SOIC | 16-pin narrow SOIC | 16-pin narrow SOIC |
| Multiplexer Configuration | Dual 4:1 differential | Dual 4:1 differential | Dual 4:1 differential | Dual 4:1 differential | Dual 4:1 differential | Dual 4:1 differential |
| Number of Circuits | 2 circuits | 2 circuits | 2 circuits | 2 circuits | 2 circuits | 2 circuits |
| Number of Pins | 16 pins | 16 pins | 16 pins | 16 pins | 16 pins | 16 pins |
| Technology | CMOS | CMOS analog multiplexer | DG409 CMOS family | DG409 CMOS family | DG409 CMOS family | CMOS analog multiplexer |
| Pin Compatibility | Pin-compatible upgrade for industry-standard DG408 and DG409 devices | DG409-family 16-SOIC footprint | DG409-family 16-SOIC footprint | DG409-family 16-SOIC footprint | DG409-family 16-SOIC footprint | Related 4-channel differential mux |
| Primary Applications | Audio routing, communications, data acquisition, guidance and control, sample-and-hold, and test equipment | Analog signal routing and channel selection | Analog signal routing and channel selection | Analog signal routing and channel selection | Analog signal routing and channel selection | Differential signal routing |
关键差异点
- Combines two differential selectors in one package (对比 DG409DY-T1-E3)
- Same documented 100 ohm switching impedance (对比 DG409DY-T1-E3)
- Exact 16-SOIC footprint continuity (对比 ADG409BRZ)
- Production family positioning (对比 DG409DY-T)
设计说明
Include the documented 100 ohm on-resistance in the complete source-to-destination model. Together with the signal source impedance and ADC or receiver input impedance, it creates an attenuation divider, while its Johnson-noise contribution can matter in high-gain measurement paths. Also account for parasitic capacitance when estimating channel settling after an address change.
Place the mux close to the shared analog destination so that the selected channel travels over a short trace. Maintain a continuous ground plane beneath and around the device, return analog currents directly to the system reference, and avoid routing the 100 ohm switch output through long copper traces. The 16-pin SOIC footprint should follow the manufacturer land pattern exactly.
Separate the address-control traces from sensitive analog inputs and outputs, particularly when several muxes share a connector or converter. Use a low-impedance ground reference and place the required bypass capacitors at the power pins according to the Analog Devices DG409 guidance. Ensure control transitions do not coincide with acquisition windows when switch settling could affect accuracy.
Do not treat the DG409DY+T as a single-ended mux merely because it uses a 16-pin package. Each functional section selects one of four differential pairs, and its positive and negative terminals must be assigned according to the manufacturer pin diagram. Verify supply voltage, logic thresholds, analog signal limits, temperature grade, and qualification before substituting another order code.
合规信息
The device is an industrial/communications interface IC rather than an automotive-qualified product, but no specific RoHS, REACH, lead-free, or halogen-free declaration was confirmed.