DG409DY+T - Dual 4:1 CMOS Analog Multiplexer | Analog Devices
MPN: DG409DY+T ✓ Hoạt độngDG409DY+T Tóm tắt
An analog multiplexer is an interface IC that connects one selected source channel to a common destination while electrically isolating the unselected channels. In the product hierarchy, the DG409 belongs to analog switches and multiplexers, interface ICs, and semiconductor signal-routing devices. A differential 4:1 configuration is especially useful when a system must preserve two related signal paths, such as the positive and negative sides of a differential measurement or communication channel.
The DG409 series provides two 4:1 circuits, a 100 ohm on-resistance, and improved operation as a pin-compatible upgrade for the industry-standard DG408 and DG409 devices. According to the Analog Devices DG409 documentation, the family is intended for audio-signal routing, communication systems, data acquisition, guidance and control systems, sample-and-hold circuits, and test equipment. These applications benefit from centralized selection of one of four differential sources without requiring a separate switch for every signal pair.
Internally, the DG409 uses CMOS analog switching to control the selected paths. The two address inputs associated with each multiplexer determine which of the four differential channels is connected to the common outputs. Because the device combines address-controlled routing with a 16-pin SOIC footprint, it simplifies board layouts where multiple instrument or communication channels must be scanned through a shared analog front end.
Typical uses include multiplexers in automated test systems, differential signal acquisition modules, communication-channel selectors, sample-and-hold circuits, audio routing networks, and industrial control or guidance systems. The differential architecture reduces the number of external routing components compared with handling each polarity as an unrelated single-ended signal, while the integrated two-circuit count supports two simultaneous selection functions.
PCB design should preserve the manufacturer's pinout and decoupling guidance, keep analog traces short, and provide an adequate ground return around the mux. Verify that signal amplitudes remain inside the device's electrical limits and that downstream loads do not exceed the specified switch characteristics. Because the on-resistance contributes directly to signal loss and noise, sensitive acquisition paths should account for the 100 ohm switch impedance during gain and bandwidth planning.
This page combines the confirmed family and ordering details with practical routing guidance, pin-compatible alternatives, package comparisons, and design notes. The alternatives are separated by functional equivalence and manufacturing source so engineers can identify a board-compatible replacement without confusing it with a device that merely provides similar multiplexing functionality.
Bộ thay thế dễ dàng lắp đặt cho DG409DY+T — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với DG409DY+T (cùng hình factor và footprint) — khác nhau ở Multiplexer Configuration, Package, Mounting Type.
DG409DY-T1-E3
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
DG409DY-T1
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
DG409DYZ-T
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
DG409DY-T
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
ADG409BRZ
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
DG409DY+T Thông số kỹ thuật
| Multiplexer Configuration | Dual 4:1 differential |
| Number of Circuits | 2 circuits |
| On-Resistance | 100 ohm |
| Số lượng chân | 16 pins |
| Hộp | 16-pin narrow SOIC |
| Kiểu lắp đặt | Surface mount |
| Process Technology | CMOS |
| Product Family | DG409 improved analog multiplexer series |
| Product Status | Production |
| Order Code | T tape-and-reel packaging |
| Differential Channel Count | 4 differential channels per circuit |
| Common Output Count | 2 common outputs for the dual configuration |
| Pin Compatibility | Pin-compatible with industry-standard DG408 and DG409 devices |
Hướng dẫn cấu hình chân DG409DY+T 16-pin narrow soic
Cấu hình chân cho DG409DY+T (16-pin narrow soic gói). Số thứ tự chân, chức năng và sơ đồ kết nối được xác định trong tài liệu thông số kỹ thuật của nhà sản xuất. Tham khảo nó để biết footprint và hướng dẫn hàn chính xác.
Không có dữ liệu chân cụ thể sẵn có cho DG409DY+T.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
DG409DY+T phù hợp cho 6 Áp dụngs: Differential Data Acquisition, Automated Test Equipment, Sample-and-Hold Signal Routing, Audio Signal Routing, Communication Channel Selection, Guidance and Control Systems.
Differential Data Acquisition
The DG409DY+T suits data-acquisition front ends that must route two related signal conductors together. Each of its two independent 4:1 sections selects one of four differential inputs and connects that pair to the common outputs. With a documented 100 ohm on-resistance, the switch can sit close to the sensor or conditioning stage to avoid adding long analog traces after selection. Designers should include the switch impedance in the ADC input model, check the selected source’s settling behavior, and preserve a low-impedance reference return to minimize conversion error.
Được đề xuất
Automated Test Equipment
The DG409DY+T can reduce the number of discrete switches in automated test equipment by selecting among four differential sources with two integrated circuits. Its two 4:1 circuits allow separate measurement paths to share a common instrument front end, while the 16-pin narrow SOIC package supports compact, high-density routing. The 100 ohm series resistance must be checked against the instrument input impedance, and the address controls should be timed so that acquisition begins only after the selected channel has settled. Ground-plane continuity and short analog traces are particularly important around sensitive test nodes.
Được đề xuất
Sample-and-Hold Signal Routing
The DG409DY+T is applicable to sample-and-hold systems requiring selection of one of several differential source channels before a shared sampling stage. Its dual 4:1 organization permits two selected paths to serve different sampling or conditioning functions. Because the documented on-resistance is 100 ohm, it contributes to source impedance, capacitor charging time, and thermal noise. The circuit should therefore account for the complete switch-and-hold network when setting acquisition time and accuracy rather than evaluating the sample-and-hold capacitor alone.
Được đề xuất
Audio Signal Routing
The DG409DY+T can route differential audio-source pairs within a communication or audio system by assigning one of four inputs to each common output. The dual architecture supports two routing sections in one 16-pin SOIC package and reduces board area compared with discrete switching networks. The 100 ohm on-resistance may be acceptable for many line-level routing tasks but should be compared with the load impedance to avoid excessive attenuation. Keep the analog path compact, maintain continuous ground references, and confirm that the selected source amplitude remains within the mux’s analog signal limits.
Được đề xuất
Communication Channel Selection
The DG409DY+T is appropriate for communication systems that must choose among multiple differential channels using a shared downstream circuit. Two independent 4:1 sections allow the same multiplexer family to support more than one signal pair, while the 16-pin SOIC package simplifies routing to the communications front end. Designers should validate logic thresholds, supply sequencing, channel transition behavior, and the 100 ohm switch resistance against the receiver or converter input. Keep digital address lines away from sensitive analog nodes to reduce coupling during channel changes.
Được đề xuất
Guidance and Control Systems
The DG409DY+T can select differential sensor or feedback paths in guidance and control systems where multiple inputs feed a common processing channel. Its two 4:1 circuits provide compact routing for two functions, and the documented pin-compatible DG409 footprint supports reuse of established analog boards. Control-loop stability should be evaluated with the 100 ohm switch resistance included in the system transfer function. Practical layouts should use an uninterrupted ground plane, short output routes, and stable bypass connections to minimize switching transients and control-signal corruption.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho DG409DY+T — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | DG409DY-T1-E3 | DG409DY-T1 | DG409DYZ-T | DG409DY-T | ADG409BRZ |
|---|---|---|---|---|---|---|
| Brand | Analog Devices | Vishay Intertechnology | Vishay Intertechnology | Renesas Electronics | Renesas Electronics | Analog Devices |
| Package | 16-pin narrow SOIC | 16-pin narrow SOIC | 16-pin narrow SOIC | 16-pin narrow SOIC | 16-pin narrow SOIC | 16-pin narrow SOIC |
| Multiplexer Configuration | Dual 4:1 differential | Dual 4:1 differential | Dual 4:1 differential | Dual 4:1 differential | Dual 4:1 differential | Dual 4:1 differential |
| Number of Circuits | 2 circuits | 2 circuits | 2 circuits | 2 circuits | 2 circuits | 2 circuits |
| Number of Pins | 16 pins | 16 pins | 16 pins | 16 pins | 16 pins | 16 pins |
| Technology | CMOS | CMOS analog multiplexer | DG409 CMOS family | DG409 CMOS family | DG409 CMOS family | CMOS analog multiplexer |
| Pin Compatibility | Pin-compatible upgrade for industry-standard DG408 and DG409 devices | DG409-family 16-SOIC footprint | DG409-family 16-SOIC footprint | DG409-family 16-SOIC footprint | DG409-family 16-SOIC footprint | Related 4-channel differential mux |
| Primary Applications | Audio routing, communications, data acquisition, guidance and control, sample-and-hold, and test equipment | Analog signal routing and channel selection | Analog signal routing and channel selection | Analog signal routing and channel selection | Analog signal routing and channel selection | Differential signal routing |
Bảo phân biệt quan trọng
- Combines two differential selectors in one package (vsDG409DY-T1-E3)
- Same documented 100 ohm switching impedance (vsDG409DY-T1-E3)
- Exact 16-SOIC footprint continuity (vsADG409BRZ)
- Production family positioning (vsDG409DY-T)
Ghi chú thiết kế
Include the documented 100 ohm on-resistance in the complete source-to-destination model. Together with the signal source impedance and ADC or receiver input impedance, it creates an attenuation divider, while its Johnson-noise contribution can matter in high-gain measurement paths. Also account for parasitic capacitance when estimating channel settling after an address change.
Place the mux close to the shared analog destination so that the selected channel travels over a short trace. Maintain a continuous ground plane beneath and around the device, return analog currents directly to the system reference, and avoid routing the 100 ohm switch output through long copper traces. The 16-pin SOIC footprint should follow the manufacturer land pattern exactly.
Separate the address-control traces from sensitive analog inputs and outputs, particularly when several muxes share a connector or converter. Use a low-impedance ground reference and place the required bypass capacitors at the power pins according to the Analog Devices DG409 guidance. Ensure control transitions do not coincide with acquisition windows when switch settling could affect accuracy.
Do not treat the DG409DY+T as a single-ended mux merely because it uses a 16-pin package. Each functional section selects one of four differential pairs, and its positive and negative terminals must be assigned according to the manufacturer pin diagram. Verify supply voltage, logic thresholds, analog signal limits, temperature grade, and qualification before substituting another order code.
Thông tin tuân thủ
The device is an industrial/communications interface IC rather than an automotive-qualified product, but no specific RoHS, REACH, lead-free, or halogen-free declaration was confirmed.