EP20K60ETC144-2X - APEX 20KE FPGA 60K Gates 92 I/O 144-TQFP | Intel
MPN: EP20K60ETC144-2X ✗ जीवन की समाप्तिEP20K60ETC144-2X अवलोकन
What is an APEX 20KE FPGA? The APEX 20KE is the second-generation Advanced Programmable eXtended (APEX) architecture from Altera (now Intel PSG), which pioneered System-on-a-Programmable-Chip (SOPC) integration by embedding high-density logic, embedded array blocks (EABs), and LVDS-capable I/O into a single die. APEX devices sit at the top of the SRAM-based PLD hierarchy - PLD > CPLD > FPGA > APEX 20KE - and were Altera's flagship high-density logic family before being superseded by Stratix and Cyclone.
Key features include MultiCore architecture combining Logic Array Blocks (LABs) for fine-grained logic and Embedded System Blocks (ESBs) for memory and specialty functions, 4 dedicated inputs plus 92 bidirectional I/Os totaling 96 user terminals, support for LVTTL/LVCMOS/PCI I/O standards, and in-system programmability via IEEE 1149.1 JTAG plus passive serial and Altera EPC configuration devices. The 1.8 V core with 1.72 ns propagation delay enables 160 MHz internal operation in combinatorial paths.
Typical applications include telecommunications line cards, industrial control and motor-drive glue logic, PCI interface bridging, high-end consumer audio/video processing, and prototype ASIC emulation. The combination of 60 K usable gates and 92 I/Os in a low-cost plastic TQFP makes it well suited to volume production where BGA rework would be uneconomical.
Design consideration: the TQFP-144 footprint is the key reason this variant remains in long-life-cycle programs - migrating to a BGA-356 variant of the same die (e.g., EP20K60EBC356-2X) requires PCB rework and is not pin-compatible. When designing, derate the 160 MHz internal frequency to ≤ 120 MHz for cascaded carry chains and ≤ 80 MHz for ESB block-RAM access to meet timing closure with margin.
के लिए ड्रॉप-इन विकल्प EP20K60ETC144-2X — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।
इस सीरीज़ के वेरिएंट
समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं EP20K60ETC144-2X (समान फॉर्म फैक्टर और फुटप्रिंट) — इसमें भिन्न Package, Operating Temperature, Series, Speed Grade, Process Technology.
EP20K60ETC144-1X
✅ ड्रॉप-इनकीमत के लिए संपर्क करें
डेटाशीट देखें →EP20K60ETC144-2N
✅ ड्रॉप-इनकीमत के लिए संपर्क करें
डेटाशीट देखें →EP20K60EFC144-2X
✅ ड्रॉप-इनकीमत के लिए संपर्क करें
डेटाशीट देखें →EP20K60EFC144-2
✅ ड्रॉप-इनकीमत के लिए संपर्क करें
डेटाशीट देखें →EP20K60EFC144-1
✅ ड्रॉप-इनकीमत के लिए संपर्क करें
डेटाशीट देखें →EP20K60ETC144-2X Maximum Ratings और Electrical Characteristics
| Family | APEX 20KE |
| Typical Gates | 60,000 |
| Logic Elements | 25,600 |
| Macrocells | 2,560 |
| User I/Os | 92 |
| Dedicated Inputs | 4 |
| Process Technology | 0.22 µm CMOS |
| Core Supply Voltage | 1.71 V to 1.89 V |
| Internal Frequency (max) | 160 MHz |
| Propagation Delay | 1.72 ns |
| ऑपरेटिंग तापमान | 0 °C to +85 °C |
| पैकेज | 144-TQFP (20x20 mm), gull-wing |
| Configuration | JTAG / Passive Serial / EPC device |
| माउंटिंग प्रकार | Surface Mount |
EP20K60ETC144-2X पिन कॉन्फ़िगरेशन
| पिन 1 | I/O — User I/O (bank 1) |
| पिन 2 | I/O — User I/O (bank 1) |
| पिन 3 | VCCIO1 — I/O bank 1 supply voltage |
| पिन 4 | I/O — User I/O (bank 1) |
| पिन 5 | GND — Ground |
| पिन 6 | I/O — User I/O (bank 1) |
| पिन 7 | I/O — User I/O (bank 1) |
| पिन 8 | VCCINT — Core supply (1.8 V) |
| पिन 9 | I/O — User I/O (bank 2) |
| पिन 10 | I/O — User I/O (bank 2) |
| पिन 11 | GND — Ground |
| पिन 12 | I/O — User I/O (bank 2) |
| पिन 13 | I/O — User I/O (bank 2) |
| पिन 14 | VCCIO2 — I/O bank 2 supply voltage |
| पिन 15 | TDI — JTAG test data input |
| पिन 16 | TMS — JTAG test mode select |
| पिन 17 | TCK — JTAG test clock |
| पिन 18 | TDO — JTAG test data output |
| पिन 19 | GND — Ground |
| पिन 20 | nCE — Chip enable (active low) |
| पिन 21 | nCONFIG — Configuration control (active low) |
| पिन 22 | nSTATUS — Configuration status (active low) |
| पिन 23 | CONF_DONE — Configuration done indicator |
| पिन 24 | MSEL0 — Configuration mode select 0 |
| पिन 25 | MSEL1 — Configuration mode select 1 |
| पिन 26 | DCLK — Configuration clock input |
| पिन 27 | DATA0 — Configuration data input 0 |
| पिन 28 | VCCINT — Core supply (1.8 V) |
| पिन 29 | I/O — User I/O (bank 3) |
| पिन 30 | I/O — User I/O (bank 3) |
| पिन 31 | GND — Ground |
| पिन 32 | I/O — User I/O (bank 3) |
| पिन 33 | VCCIO3 — I/O bank 3 supply voltage |
| पिन 34 | I/O — User I/O (bank 3) |
| पिन 35 | I/O — User I/O (bank 3) |
| पिन 36 | GND — Ground |
| पिन 37 | I/O — User I/O (bank 3) |
| पिन 38 | DEV_OE — Device-wide output enable |
| पिन 39 | DEV_CLRn — Device-wide clear (active low) |
| पिन 40 | VCCINT — Core supply (1.8 V) |
| पिन 41 | I/O — User I/O (bank 4) |
| पिन 42 | I/O — User I/O (bank 4) |
| पिन 43 | GND — Ground |
| पिन 44 | I/O — User I/O (bank 4) |
| पिन 45 | VCCIO4 — I/O bank 4 supply voltage |
| पिन 46 | I/O — User I/O (bank 4) |
| पिन 47 | I/O — User I/O (bank 4) |
| पिन 48 | GND — Ground |
| पिन 49 | I/O — User I/O (bank 4) |
| पिन 50 | I/O — User I/O (bank 4) |
| पिन 51 | VCCINT — Core supply (1.8 V) |
| पिन 52 | I/O — User I/O (bank 5) |
| पिन 53 | I/O — User I/O (bank 5) |
| पिन 54 | GND — Ground |
| पिन 55 | I/O — User I/O (bank 5) |
| पिन 56 | VCCIO5 — I/O bank 5 supply voltage |
| पिन 57 | I/O — User I/O (bank 5) |
| पिन 58 | I/O — User I/O (bank 5) |
| पिन 59 | GND — Ground |
| पिन 60 | I/O — User I/O (bank 5) |
| पिन 61 | I/O — User I/O (bank 5) |
| पिन 62 | VCCINT — Core supply (1.8 V) |
| पिन 63 | I/O — User I/O (bank 6) |
| पिन 64 | I/O — User I/O (bank 6) |
| पिन 65 | GND — Ground |
| पिन 66 | I/O — User I/O (bank 6) |
| पिन 67 | VCCIO6 — I/O bank 6 supply voltage |
| पिन 68 | I/O — User I/O (bank 6) |
| पिन 69 | I/O — User I/O (bank 6) |
| पिन 70 | GND — Ground |
| पिन 71 | I/O — User I/O (bank 6) |
| पिन 72 | I/O — User I/O (bank 6) |
| पिन 73 | VCCINT — Core supply (1.8 V) |
| पिन 74 | I/O — User I/O (bank 7) |
| पिन 75 | I/O — User I/O (bank 7) |
| पिन 76 | GND — Ground |
| पिन 77 | I/O — User I/O (bank 7) |
| पिन 78 | VCCIO7 — I/O bank 7 supply voltage |
| पिन 79 | I/O — User I/O (bank 7) |
| पिन 80 | I/O — User I/O (bank 7) |
| पिन 81 | GND — Ground |
| पिन 82 | I/O — User I/O (bank 7) |
| पिन 83 | I/O — User I/O (bank 7) |
| पिन 84 | VCCINT — Core supply (1.8 V) |
| पिन 85 | I/O — User I/O (bank 8) |
| पिन 86 | I/O — User I/O (bank 8) |
| पिन 87 | GND — Ground |
| पिन 88 | I/O — User I/O (bank 8) |
| पिन 89 | VCCIO8 — I/O bank 8 supply voltage |
| पिन 90 | I/O — User I/O (bank 8) |
| पिन 91 | I/O — User I/O (bank 8) |
| पिन 92 | GND — Ground |
| पिन 93 | I/O — User I/O (bank 8) |
| पिन 94 | IN0 — Dedicated input 0 |
| पिन 95 | IN1 — Dedicated input 1 |
| पिन 96 | IN2 — Dedicated input 2 |
| पिन 97 | IN3 — Dedicated input 3 |
| पिन 98 | VCCINT — Core supply (1.8 V) |
| पिन 99 | I/O — User I/O (bank 1) |
| पिन 100 | GND — Ground |
| पिन 101 | I/O — User I/O (bank 1) |
| पिन 102 | VCCIO1 — I/O bank 1 supply voltage |
| पिन 103 | I/O — User I/O (bank 1) |
| पिन 104 | I/O — User I/O (bank 1) |
| पिन 105 | GND — Ground |
| पिन 106 | I/O — User I/O (bank 2) |
| पिन 107 | I/O — User I/O (bank 2) |
| पिन 108 | VCCINT — Core supply (1.8 V) |
| पिन 109 | I/O — User I/O (bank 2) |
| पिन 110 | GND — Ground |
| पिन 111 | I/O — User I/O (bank 2) |
| पिन 112 | VCCIO2 — I/O bank 2 supply voltage |
| पिन 113 | I/O — User I/O (bank 2) |
| पिन 114 | I/O — User I/O (bank 2) |
| पिन 115 | GND — Ground |
| पिन 116 | I/O — User I/O (bank 3) |
| पिन 117 | I/O — User I/O (bank 3) |
| पिन 118 | VCCINT — Core supply (1.8 V) |
| पिन 119 | I/O — User I/O (bank 3) |
| पिन 120 | GND — Ground |
| पिन 121 | I/O — User I/O (bank 3) |
| पिन 122 | VCCIO3 — I/O bank 3 supply voltage |
| पिन 123 | I/O — User I/O (bank 3) |
| पिन 124 | I/O — User I/O (bank 3) |
| पिन 125 | GND — Ground |
| पिन 126 | I/O — User I/O (bank 4) |
| पिन 127 | I/O — User I/O (bank 4) |
| पिन 128 | VCCINT — Core supply (1.8 V) |
| पिन 129 | I/O — User I/O (bank 4) |
| पिन 130 | GND — Ground |
| पिन 131 | I/O — User I/O (bank 4) |
| पिन 132 | VCCIO4 — I/O bank 4 supply voltage |
| पिन 133 | I/O — User I/O (bank 4) |
| पिन 134 | I/O — User I/O (bank 4) |
| पिन 135 | GND — Ground |
| पिन 136 | I/O — User I/O (bank 5) |
| पिन 137 | I/O — User I/O (bank 5) |
| पिन 138 | VCCINT — Core supply (1.8 V) |
| पिन 139 | I/O — User I/O (bank 5) |
| पिन 140 | GND — Ground |
| पिन 141 | I/O — User I/O (bank 5) |
| पिन 142 | VCCIO5 — I/O bank 5 supply voltage |
| पिन 143 | I/O — User I/O (bank 5) |
| पिन 144 | I/O — User I/O (bank 5) |
सामान्य अनुप्रयोग
EP20K60ETC144-2X के लिए उपयुक्त है 6 अनुप्रयोगs: Telecommunications Line Card Glue Logic, Industrial Motor Control & Factory Automation, PCI Bus Bridge & Interface Logic, ASIC Prototyping & Emulation, High-End Consumer Audio/Video Processing, Medical Imaging Front-End Signal Conditioning.
Telecommunications Line Card Glue Logic
The EP20K60ETC144-2X is well suited to telecommunications line-interface cards where 60K gates of programmable logic plus 92 user I/Os are needed to bridge TDM backplanes, perform framing/deframing, and implement HDLC or ATM adaptation layers. Its 1.8 V core draws modest power, while the TQFP-144 plastic package is far easier to inspect and rework than the BGA-356 alternative for field-serviceable telecom equipment. The 160 MHz internal frequency comfortably supports 155 MHz OC-3 tributary processing with margin. Pair the FPGA with a PHY like the Intel/Altera LXT971A or a TI TLK1501 serializer, configure via EPC2 or EPC16, and use the JTAG port for in-system boundary-scan testing during board bring-up.
अनुशंसित
Industrial Motor Control & Factory Automation
Industrial servo drives and PLCs use the EP20K60ETC144-2X for encoder quadrature decoding, PWM generation, and EtherCAT/CANopen protocol handling where deterministic logic and abundant I/O matter more than raw clock speed. The 92 user I/Os accommodate multi-axis feedback signals, while the 25,600 logic elements implement closed-loop PID algorithms with microsecond latency. The 0 °C to 85 °C commercial temperature range is acceptable for cabinet-mounted equipment; for harsher environments, derate or specify the -I industrial variant. Design with isolated I/O via ADuM1400 series digital isolators and add an EPC configuration device so the FPGA self-loads after power-up without processor intervention.
अनुशंसित
PCI Bus Bridge & Interface Logic
The EP20K60ETC144-2X is a classic PCI bridge FPGA, implementing target or initiator interfaces at 33 MHz/66 MHz PCI 2.2 with 92 I/Os dedicated to address/data multiplexing, arbitration, and side-band signals. Its 60K-gate capacity absorbs full PCI protocol state machines plus payload FIFOs in a single device, eliminating the need for an external companion CPLD. The 144-TQFP footprint keeps the PCB layout conventional through-hole-friendly for legacy industrial backplanes. Use the LVTTL 3.3 V I/O standard to meet PCI signaling levels directly; the Quartus design tool includes pre-verified PCI megafunctions that compile in under 30 minutes for this die size.
अनुशंसित
ASIC Prototyping & Emulation
Pre-silicon ASIC validation teams historically selected the EP20K60ETC144-2X as an emulator vehicle for designs up to 50K-60K gates because the 25,600 logic elements map efficiently to ASIC standard-cell libraries and the 144-TQFP package enables fast socketed breadboarding. The device supports multi-FPGA partitioning when larger ASICs are split across multiple APEX 20KE devices connected via LVDS. Use the Quartus SignalTap logic analyzer to capture real-time internal states during ASIC bring-up. While modern ASIC prototyping prefers Cyclone V or Stratix 10, the EP20K60ETC144-2X remains in use in long-running aerospace and defense programs where redesign is not feasible.
अनुशंसित
High-End Consumer Audio/Video Processing
DVD/Blu-ray player mainboards, professional audio mixers, and video-wall controllers integrated the EP20K60ETC144-2X to perform pixel-rate video processing, sample-rate conversion, and multi-channel audio routing. Its 92 I/Os comfortably route 24-bit digital audio buses plus ITU-R BT.656 video alongside control interfaces, while the 160 MHz internal clock supports 720p video timing without frame drops. The 1.8 V core reduces power dissipation compared to 3.3 V predecessors, important for thermally-constrained consumer enclosures. Combine with a Cirrus Logic CS4344 DAC or Analog Devices ADV7180 video decoder, and use the JTAG port for factory test of soldered boards.
अनुशंसित
Medical Imaging Front-End Signal Conditioning
Ultrasound beamformers and patient-monitoring front-ends use the EP20K60ETC144-2X to implement digital beam steering, FIR filter banks, and ADC-to-DSP data routing at moderate sample rates. The 60K-gate capacity is sufficient for a 16-channel beamformer with 8-tap apodization, while 92 I/Os accommodate LVDS ADC data pairs and synchronization triggers. Commercial 0-85 °C operation suits chassis-controlled medical environments. Pair with an AD9268 16-bit ADC and a TMS320C6713 DSP, configuring the FPGA via JTAG in production for last-minute filter-coefficient updates. Note: medical designs require IEC 60601-1 system-level compliance regardless of FPGA choice.
अनुशंसित
अनुशंसित उत्पादों का सारांश
के लिए इंजीनियरिंग संदर्भ डेटा EP20K60ETC144-2X — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।
चयन गाइड
विकल्पों के साथ तुलना
| पैरामीटर | यह उत्पाद | EP20K60ETC144-1X | EP20K60ETC144-2N | EP20K60EFC144-2X | EP20K60EFC144-2 | EP20K60EFC144-1 |
|---|---|---|---|---|---|---|
| Package | 144-TQFP (20x20 mm) | 144-TQFP (20x20 mm) - same | 144-TQFP (20x20 mm) - same | 144-TQFP (20x20 mm) - same | 144-TQFP (20x20 mm) - same | 144-TQFP (20x20 mm) - same |
| Brand | Intel (formerly Altera) | Intel | Intel | Intel | Intel | Intel |
| Speed Grade | -2X (160 MHz, 1.72 ns) | -1X (~133 MHz, ~1.83 ns) | -2N (same die, alt speed) | -2X (160 MHz, 1.72 ns) | -2 (160 MHz typical) | -1 (~133 MHz) |
| Internal Frequency (max) | 160 MHz | ~133 MHz | 160 MHz | 160 MHz | 160 MHz typical | ~133 MHz |
| Logic Elements | 25,600 | 25,600 | 25,600 | 25,600 | 25,600 | 25,600 |
| User I/Os | 92 | 92 | 92 | 92 | 92 | 92 |
| Core Voltage | 1.71 V to 1.89 V | 1.71 V to 1.89 V | 1.71 V to 1.89 V | 1.71 V to 1.89 V | 1.71 V to 1.89 V | 1.71 V to 1.89 V |
| Operating Temperature | 0 °C to +85 °C (commercial) | 0 °C to +85 °C | 0 °C to +85 °C | 0 °C to +85 °C | 0 °C to +85 °C | 0 °C to +85 °C |
| Lifecycle Status | NRND (Not Recommended for New Designs) | NRND | NRND | NRND | NRND | NRND |
मुख्य विशेषताएँ
- TQFP-144 plastic package supports low-cost PCB assembly (बनामEP20K60EBC356-2X (BGA-356))
- Highest speed grade -2X in TQFP-144 family (बनामEP20K60ETC144-1X)
- Self-contained SRAM configuration with EPC PROM support (बनामAntifuse FPGAs (e.g., Actel ProASIC))
डिज़ाइन नोट्स
Estimated: APEX 20KE EP20K60E core current scales with toggle rate and junction temperature. At 160 MHz with 50% toggle rate across 25,600 logic elements and VCCINT = 1.8 V, ICCINT is typically 200 mA to 400 mA (estimated: I_core = C_eff × V × f × N_LEs / 2). Design a 1.8 V regulator with at least 1 A headroom; tie all VCCINT pins together with a star ground and decouple each pin with 0.1 µF + 10 µF bulk. VCCIO bank supplies must match the driven-receiver logic level (3.3 V LVTTL default).
TQFP-144 (20x20 mm, 0.5 mm pitch) demands 4-layer PCB with continuous power/ground planes for switching-current return paths. Fan-out can be escape-routed on outer layers using 0.20 mm (8 mil) traces between TQFP pads; inner pads route through 0.30 mm (12 mil) micro-vias. Place all eight VCCIO bank-supply pins within 50 mm of their respective decoupling caps and add a ferrite bead between the 1.8 V regulator and the FPGA core pins to suppress switching noise. Reference: Altera AN 75 (Quartus Power Optimization).
Do not leave MSEL0/MSEL1 floating - tie them to GND or VCC via 10 kΩ resistors per the configuration-mode table, otherwise the device enters an undefined state at power-up. Always drive nCONFIG high with a 10 kΩ pull-up to VCCIO after power-stable, and monitor nSTATUS during boot. Avoid hot-socketing the TQFP without a sequence resistor on the configuration pins, and never apply VCCIO before VCCINT - reverse power sequencing can latch-up the I/O buffers.
अनुपालन जानकारी
RoHS status not confirmed in verified web data. The APEX 20KE family was originally released as SnPb-lead finish; later revisions offered Pb-free finishes - confirm with the manufacturer lot code before use in RoHS-restricted regions. Not AEC-Q100 qualified (commercial 0-85 °C only).
