KSZ8051MNL-TR - 10/100 Ethernet PHY | Microchip Technology
MPN: KSZ8051MNL-TR ✓ सक्रियKSZ8051MNL-TR अवलोकन
An Ethernet physical-layer transceiver, or Ethernet PHY, converts digital frames exchanged with a network controller into electrical signals suitable for twisted-pair transmission and reconstructs incoming signals for the MAC. The PHY sits between the Ethernet MAC and the transformer-coupled network cable, implementing the physical signaling required by 10BASE-T and 100BASE-TX networks. The KSZ8051 therefore belongs to the interface-IC hierarchy: Ethernet PHY, network interface, integrated circuit, and semiconductor.
The KSZ8051 supports both 10BASE-T and 100BASE-TX operation from a single supply. Its full Media Independent Interface provides parallel data, control, and status connections to a compatible Ethernet controller. IEEE 802.3 MDIO management support allows an upper-layer controller to monitor and control PHY status. According to the Microchip product page, the highly integrated PHY reduces board cost and simplifies layout, while the internal 1.2 V rail eliminates the need for a separate 1.2 V supply at the device level.
The automotive qualification is a defining feature for this family. Automotive electronic systems require predictable operation across demanding temperature, vibration, and EMC environments. AEC-Q100 qualification makes the KSZ8051 suitable for qualified vehicle-network designs when the complete system also satisfies applicable automotive EMC and network requirements. The MNL suffix identifies the 32-QFN device, and the -TR suffix identifies the tape-and-reel ordering option.
Typical uses include automotive Ethernet gateways, body and chassis controllers, infotainment systems, vehicle access networks, and industrial or embedded Ethernet equipment using MII-connected controllers. In these systems, the PHY handles the physical layer while the host controller handles frames, protocol processing, and higher-layer networking. The MII boundary keeps the PHY suitable for controllers designed around a parallel bus rather than a serial Media Independent Interface.
Layout is especially important because the PHY interfaces directly to a cable transformer through differential analog pins. Decoupling capacitors should be placed at the supply pins, the 1.2 V output should be decoupled as directed by the reference design, and the analog pair should follow the manufacturer’s differential-routing and return-path guidance. Keeping switching circuitry and high-current paths away from the PHY reduces susceptibility to radiated and conducted noise.
This page consolidates the device function, qualified automotive positioning, package details, interface information, migration considerations, practical layout guidance, and confirmed same-footprint alternatives. It also distinguishes a true replacement from a related 32-QFN Ethernet PHY whose pins or registers differ, helping engineers avoid replacements that require schematic or firmware changes.
के लिए ड्रॉप-इन विकल्प KSZ8051MNL-TR — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।
इस सीरीज़ के वेरिएंट
समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं KSZ8051MNL-TR (समान फॉर्म फैक्टर और फुटप्रिंट) — इसमें भिन्न Automotive Qualification, Device Type, Management Interface, Package.
KSZ8051MNLV-TR
✅ ड्रॉप-इन📋 संदर्भ विकल्प (कैटलॉग में नहीं)
KSZ8051RNL-TR
✅ ड्रॉप-इनकीमत के लिए संपर्क करें
डेटाशीट देखें →KSZ8051MNL-TR विशेषताएं
| Device Type | 10BASE-T/100BASE-TX automotive Ethernet physical-layer transceiver |
| Ethernet Speed Support | 10BASE-T and 100BASE-TX |
| Transceiver Count | 1 transceiver |
| Host Interface | Full MII |
| Management Interface | IEEE 802.3 MDIO |
| Supply Architecture | Single supply |
| Internal Core Supply | 1.2 V |
| Automotive Qualification | AEC-Q100 standard qualified |
| पैकेज | 32-QFN (5 x 5 mm) |
| माउंटिंग प्रकार | Surface mount |
| पिन की संख्या | 32 pins |
| Cable Standard | CAT-5 twisted-pair network cable |
KSZ8051MNL-TR 32-qfn (5 x 5 mm) पिन कॉन्फ़िगरेशन गाइड
KSZ8051MNL-TR (32-qfn (5 x 5 mm) पैकेज) के लिए पिन कॉन्फ़िगरेशन। पिन नंबरिंग, फ़ंक्शन और कनेक्शन आरेख निर्माता डेटाशीट में परिभाषित हैं। सटीक फुटप्रिंट और सोल्डरिंग दिशानिर्देशों के लिए इसे देखें।
इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: KSZ8051MNL-TR.
देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।
सामान्य अनुप्रयोग
KSZ8051MNL-TR के लिए उपयुक्त है 6 अनुप्रयोगs: Automotive Ethernet Gateway, Body Control Module Networking, Vehicle Infotainment Ethernet, Industrial Embedded Ethernet, Automotive Diagnostics and Service Network, Embedded Network Controller Interface.
Automotive Ethernet Gateway
The KSZ8051MNL-TR fits an automotive Ethernet gateway where a controller must connect a 10BASE-T or 100BASE-TX network. Its full MII interface separates frame handling in the MAC from physical signaling in the PHY, while the AEC-Q100-qualified 32-QFN device supports compact board construction. The internal 1.2 V rail and local decoupling requirements can simplify analog supply planning, but the implementation must preserve the manufacturer’s reference layout. For an automotive design, verify temperature grade, EMC behavior, cable reach, and system fault requirements rather than treating PHY qualification as complete network certification.
अनुशंसित
Body Control Module Networking
The KSZ8051MNL-TR can serve as the physical-layer endpoint in a body-control module that exchanges diagnostic or control traffic over an Ethernet network. The single-supply architecture, 10BASE-T/100BASE-TX support, and MII host connection allow an embedded controller with a parallel Ethernet interface to participate directly in the physical link. AEC-Q100 standard qualification supports automotive platform selection, provided the exact order code satisfies the required temperature and qualification conditions. Keep the analog differential pair isolated from switching nodes and route it according to the manufacturer reference schematic to reduce susceptibility to vehicle electrical noise.
अनुशंसित
Vehicle Infotainment Ethernet
KSZ8051MNL-TR is appropriate for an infotainment Ethernet node requiring a qualified 10BASE-T/100BASE-TX physical layer and a conventional parallel host interface. The PHY can terminate the physical network side while an MII-compatible controller handles packet processing and connectivity to audio, display, and vehicle-service subsystems. Its 32-QFN, 5 x 5 mm package supports space-constrained boards, although careful decoupling and analog routing remain necessary. The design team should evaluate electromagnetic immunity, ground architecture, connector choice, and cable topology at the vehicle level in addition to the PHY’s AEC-Q100 status.
अनुशंसित
Industrial Embedded Ethernet
The KSZ8051MNL-TR can be used in an embedded industrial controller that needs 10BASE-T or 100BASE-TX connectivity through a full MII interface. It is particularly useful where a host processor already exposes MII timing and control signals, avoiding the need for a different serial PHY architecture. The integrated 1.2 V rail reduces the number of externally generated analog rails, while the small QFN package supports compact assemblies. For industrial use, confirm the order code’s electrical and temperature limits, implement the reference decoupling, and preserve controlled return paths around the analog pins.
अनुशंसित
Automotive Diagnostics and Service Network
KSZ8051MNL-TR can support a diagnostics or service-network node that exchanges frames between an embedded Ethernet controller and a vehicle network. The MII interface gives the controller direct PHY access, and MDIO permits an upper layer to query and control physical-layer status. Its qualified automotive positioning is useful for platform programs, while its 10BASE-T/100BASE-TX support allows the same PHY design to accommodate different network rates. During implementation, define cable length and topology limits, termination requirements, and diagnostic fault behavior at the system level, because these conditions extend beyond the component’s basic link-rate specification.
अनुशंसित
Embedded Network Controller Interface
KSZ8051MNL-TR is suitable for an embedded network-controller design that already uses a full MII boundary. The PHY supplies the 10BASE-T/100BASE-TX line-side signaling while the controller handles frames, addressing, and protocol functions. The 32-QFN package provides a compact solution, and the internal 1.2 V output can reduce external supply complexity when the reference circuit is followed. Designers should pay particular attention to simultaneous switching noise, supply sequencing, exposed-pad grounding, and separation between the analog network path and digital controller circuitry to maintain deterministic Ethernet operation.
अनुशंसित
अनुशंसित उत्पादों का सारांश
के लिए इंजीनियरिंग संदर्भ डेटा KSZ8051MNL-TR — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।
चयन गाइड
विकल्पों के साथ तुलना
| पैरामीटर | यह उत्पाद | KSZ8051MNLV-TR | KSZ8051RNL-TR |
|---|---|---|---|
| Package | 32-QFN (5 x 5 mm) | 32-QFN (5 x 5 mm) | 32-QFN (5 x 5 mm) |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology |
| Ethernet Support | 10BASE-T/100BASE-TX | 10BASE-T/100BASE-TX | 10BASE-T/100BASE-TX |
| Host Interface | Full MII | MII | MII |
| Automotive Qualification | AEC-Q100 standard qualified | Automotive PHY | Automotive PHY |
| Transceiver Count | 1 transceiver | 1 transceiver | 1 transceiver |
मुख्य विशेषताएँ
- Automotive qualification with established 10/100 MII PHY architecture (बनामKSZ8051MNLV-TR)
- Same-package family alternative with the same nominal Ethernet classes (बनामKSZ8051RNL-TR)
- Single-supply architecture with an integrated 1.2 V core rail (बनामKSZ8051MNLV-TR)
डिज़ाइन नोट्स
Follow the KSZ8051 reference schematic for capacitor placement. Place the main supply bypass capacitor at the corresponding power pin and decouple VDD_1.2 at pin 2 with the components shown in the reference design. Keep the loop formed by each capacitor and its power pin as short as practical, and connect the exposed thermal pad to the ground plane using the manufacturer’s recommended thermal-via arrangement.
Route the Ethernet differential pair as a controlled-impedance pair and avoid introducing stubs or unnecessary vias. Keep the PHY-side copper path and network transformer connection away from clocks, switching regulators, and high-current return paths. Provide a continuous ground reference beneath the analog section, and avoid placing test pads or unrelated high-speed traces in the sensitive differential-channel region.
Do not treat every 32-QFN Ethernet PHY as a drop-in replacement. The manufacturer migration material for KSZ8051, KSZ8081, and KSZ8091 identifies hardware pin and software register differences. Confirm package pin names, strap-resistor values, supply levels, interface type, and register behavior for every proposed substitution, and perform a hardware and network regression test before production release.
Use the manufacturer’s transformer, line-side component, and printed-circuit recommendations as a coordinated network. The PHY, magnetics, cable, and connector must be validated as one channel because undocumented impedance transitions or mismatched termination can degrade return loss and cause link errors. Review the maximum supported cable length, topology, and common-mode requirements for the exact system rather than relying only on the nominal 10BASE-T or 100BASE-TX label.
अनुपालन जानकारी
Microchip Technology identifies the KSZ8051 as AEC-Q100 standard qualified for automotive applications. The other compliance fields are unknown because no explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration was included in the manufacturer listing.