Microchip Technology

KSZ8051MNL-TR - 10/100 Ethernet PHY | Microchip Technology

MPN: KSZ8051MNL-TR ✓ פעיל
Single supply Vdss 32-QFN (5 x 5 mm) Package 10BASE-T and 100BASE-TX Speed
כמות הזמנה מינימלית: 1 |

KSZ8051MNL-TR סקירה

The Microchip Technology KSZ8051MNL-TR is a single-supply 10BASE-T/100BASE-TX automotive Ethernet physical-layer transceiver packaged in a 32-QFN (5 x 5 mm) package. It provides one Ethernet transceiver, full MII connectivity, and IEEE 802.3 management interface support for automotive Ethernet links over twisted-pair cabling. The device is AEC-Q100 standard qualified and incorporates an internal 1.2 V supply for its analog core.

An Ethernet physical-layer transceiver, or Ethernet PHY, converts digital frames exchanged with a network controller into electrical signals suitable for twisted-pair transmission and reconstructs incoming signals for the MAC. The PHY sits between the Ethernet MAC and the transformer-coupled network cable, implementing the physical signaling required by 10BASE-T and 100BASE-TX networks. The KSZ8051 therefore belongs to the interface-IC hierarchy: Ethernet PHY, network interface, integrated circuit, and semiconductor.

The KSZ8051 supports both 10BASE-T and 100BASE-TX operation from a single supply. Its full Media Independent Interface provides parallel data, control, and status connections to a compatible Ethernet controller. IEEE 802.3 MDIO management support allows an upper-layer controller to monitor and control PHY status. According to the Microchip product page, the highly integrated PHY reduces board cost and simplifies layout, while the internal 1.2 V rail eliminates the need for a separate 1.2 V supply at the device level.

The automotive qualification is a defining feature for this family. Automotive electronic systems require predictable operation across demanding temperature, vibration, and EMC environments. AEC-Q100 qualification makes the KSZ8051 suitable for qualified vehicle-network designs when the complete system also satisfies applicable automotive EMC and network requirements. The MNL suffix identifies the 32-QFN device, and the -TR suffix identifies the tape-and-reel ordering option.

Typical uses include automotive Ethernet gateways, body and chassis controllers, infotainment systems, vehicle access networks, and industrial or embedded Ethernet equipment using MII-connected controllers. In these systems, the PHY handles the physical layer while the host controller handles frames, protocol processing, and higher-layer networking. The MII boundary keeps the PHY suitable for controllers designed around a parallel bus rather than a serial Media Independent Interface.

Layout is especially important because the PHY interfaces directly to a cable transformer through differential analog pins. Decoupling capacitors should be placed at the supply pins, the 1.2 V output should be decoupled as directed by the reference design, and the analog pair should follow the manufacturer’s differential-routing and return-path guidance. Keeping switching circuitry and high-current paths away from the PHY reduces susceptibility to radiated and conducted noise.

This page consolidates the device function, qualified automotive positioning, package details, interface information, migration considerations, practical layout guidance, and confirmed same-footprint alternatives. It also distinguishes a true replacement from a related 32-QFN Ethernet PHY whose pins or registers differ, helping engineers avoid replacements that require schematic or firmware changes.

חלופות תחליף ישיר עבור KSZ8051MNL-TR — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

וריאנטים בסדרה זו

דגמים מאותה סדרה התואמים Drop-in עם KSZ8051MNL-TR (אותו גורם צורה וטביעת רגל) — שונים ב Automotive Qualification, Device Type, Management Interface, Package.

Microchip Technology
Automotive Qualification: AEC-Q100 qualified
Device Type: 1/1 Ethernet transceiver
Management Interface: MDC/MDIO
השווה עם KSZ8051MNL-TR →

KSZ8051MNLV-TR

✅ Drop-In
📦 32-QFN (5 x 5 mm)
Same 32-QFN 5 x 5 mm body and MII PHY class; package-length and width difference is 0 mm, while detailed electrical and temperature deltas require datasheet confirmation.

📋 חלופה להתייחסות (לא בקטלוג)

KSZ8051RNL-TR

✅ Drop-In
Microchip Technology
📦 32-QFN (5 x 5 mm)
1/1 Ethernet transceiver · 10BASE-T and 100BASE-TX, up to 100 Mbps · RMII v1.2 · Single supply · 3.135 V to 3.465 V · 50 MHz · 50 MHz output to MAC or external 50 MHz input option · MDC/MDIO

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

KSZ8051MNL-TR מפרטים

Device Type 10BASE-T/100BASE-TX automotive Ethernet physical-layer transceiver
Ethernet Speed Support 10BASE-T and 100BASE-TX
Transceiver Count 1 transceiver
Host Interface Full MII
Management Interface IEEE 802.3 MDIO
Supply Architecture Single supply
Internal Core Supply 1.2 V
Automotive Qualification AEC-Q100 standard qualified
מארז 32-QFN (5 x 5 mm)
סוג הרכבה Surface mount
מספר פינים 32 pins
Cable Standard CAT-5 twisted-pair network cable

מדריך תצורת פינים של KSZ8051MNL-TR 32-qfn (5 x 5 mm)

תצורת פינים עבור KSZ8051MNL-TR (מארזת 32-qfn (5 x 5 mm)). מספרי פינים, פונקציות ותרשימי חיבורים מוגדרים ב-Datasheet של היצרן. יש לעיין בו לקבלת ה-footprint המדויק והנחיות הלחמה.

תרשים פינים של מארזת 32-qfn (5 x 5 mm) עבור KSZ8051MNL-TR

אין נתוני פריסת פינים מפורטים עבור KSZ8051MNL-TR.

עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.

יישומים טיפוסיים

KSZ8051MNL-TR מתאים עבור 6 יישוםs: Automotive Ethernet Gateway, Body Control Module Networking, Vehicle Infotainment Ethernet, Industrial Embedded Ethernet, Automotive Diagnostics and Service Network, Embedded Network Controller Interface.

🚗

Automotive Ethernet Gateway

The KSZ8051MNL-TR fits an automotive Ethernet gateway where a controller must connect a 10BASE-T or 100BASE-TX network. Its full MII interface separates frame handling in the MAC from physical signaling in the PHY, while the AEC-Q100-qualified 32-QFN device supports compact board construction. The internal 1.2 V rail and local decoupling requirements can simplify analog supply planning, but the implementation must preserve the manufacturer’s reference layout. For an automotive design, verify temperature grade, EMC behavior, cable reach, and system fault requirements rather than treating PHY qualification as complete network certification.

🚗

Body Control Module Networking

The KSZ8051MNL-TR can serve as the physical-layer endpoint in a body-control module that exchanges diagnostic or control traffic over an Ethernet network. The single-supply architecture, 10BASE-T/100BASE-TX support, and MII host connection allow an embedded controller with a parallel Ethernet interface to participate directly in the physical link. AEC-Q100 standard qualification supports automotive platform selection, provided the exact order code satisfies the required temperature and qualification conditions. Keep the analog differential pair isolated from switching nodes and route it according to the manufacturer reference schematic to reduce susceptibility to vehicle electrical noise.

📺

Vehicle Infotainment Ethernet

KSZ8051MNL-TR is appropriate for an infotainment Ethernet node requiring a qualified 10BASE-T/100BASE-TX physical layer and a conventional parallel host interface. The PHY can terminate the physical network side while an MII-compatible controller handles packet processing and connectivity to audio, display, and vehicle-service subsystems. Its 32-QFN, 5 x 5 mm package supports space-constrained boards, although careful decoupling and analog routing remain necessary. The design team should evaluate electromagnetic immunity, ground architecture, connector choice, and cable topology at the vehicle level in addition to the PHY’s AEC-Q100 status.

🏭

Industrial Embedded Ethernet

The KSZ8051MNL-TR can be used in an embedded industrial controller that needs 10BASE-T or 100BASE-TX connectivity through a full MII interface. It is particularly useful where a host processor already exposes MII timing and control signals, avoiding the need for a different serial PHY architecture. The integrated 1.2 V rail reduces the number of externally generated analog rails, while the small QFN package supports compact assemblies. For industrial use, confirm the order code’s electrical and temperature limits, implement the reference decoupling, and preserve controlled return paths around the analog pins.

🔧

Automotive Diagnostics and Service Network

KSZ8051MNL-TR can support a diagnostics or service-network node that exchanges frames between an embedded Ethernet controller and a vehicle network. The MII interface gives the controller direct PHY access, and MDIO permits an upper layer to query and control physical-layer status. Its qualified automotive positioning is useful for platform programs, while its 10BASE-T/100BASE-TX support allows the same PHY design to accommodate different network rates. During implementation, define cable length and topology limits, termination requirements, and diagnostic fault behavior at the system level, because these conditions extend beyond the component’s basic link-rate specification.

🌐

Embedded Network Controller Interface

KSZ8051MNL-TR is suitable for an embedded network-controller design that already uses a full MII boundary. The PHY supplies the 10BASE-T/100BASE-TX line-side signaling while the controller handles frames, addressing, and protocol functions. The 32-QFN package provides a compact solution, and the internal 1.2 V output can reduce external supply complexity when the reference circuit is followed. Designers should pay particular attention to simultaneous switching noise, supply sequencing, exposed-pad grounding, and separation between the analog network path and digital controller circuitry to maintain deterministic Ethernet operation.

What is the KSZ8051MNL-TR?
The KSZ8051MNL-TR is a Microchip Technology single-supply 10BASE-T/100BASE-TX Ethernet physical-layer transceiver for automotive applications. According to the Microchip product page, it is AEC-Q100 standard qualified and comes in a 32-QFN package measuring 5 x 5 mm. It interfaces through a full MII connection and also supports IEEE 802.3 MDIO management, allowing a network controller to monitor and control the physical layer.
What Ethernet speeds does KSZ8051MNL-TR support?
The KSZ8051MNL-TR supports 10BASE-T and 100BASE-TX operation over standard twisted-pair Ethernet cabling. It functions as the physical layer beneath an Ethernet MAC, handling electrical signaling while the controller manages frames and protocols. The manufacturer describes it as a single-supply 10BASE-T/100BASE-TX PHY, and the product is qualified to AEC-Q100 standards for automotive applications where the surrounding network design meets the applicable system requirements.
Where can I download the KSZ8051MNL-TR datasheet PDF?
The KSZ8051MNL-TR datasheet PDF is available from the Microchip Technology device-document link on this page. The manufacturer document identifies the KSZ8051MNL/RNL family and covers its 10BASE-T/100BASE-TX physical layer, MII connections, MDIO management support, supply arrangements, and internal 1.2 V rail. Use the pin-description and electrical-characteristics tables in that document when assigning PCB connections and validating operating limits.
Where can I find the KSZ8051MNL-TR pinout?
The authoritative KSZ8051MNL-TR pin assignment is in the pin-description table of the Microchip manufacturer datasheet. The device uses a 32-QFN, 5 x 5 mm package, but pin names and electrical types should be taken directly from that table before schematic capture. The reference schematic linked in the manufacturer materials also shows the required 1.2 V decoupling arrangement. Do not infer pin functions solely from a generic QFN drawing.
Is KSZ8051MNL-TR suitable for automotive Ethernet?
Yes, the KSZ8051MNL-TR is specifically positioned for automotive Ethernet and is AEC-Q100 standard qualified according to Microchip Technology. Its 10BASE-T/100BASE-TX physical layer supports automotive twisted-pair networks, while the full MII interface allows connection to an automotive-compatible Ethernet controller. Qualification of the PHY does not by itself certify the complete vehicle network; system-level EMC, environmental, fault-response, and wiring requirements must also be met.
Does KSZ8051MNL-TR require an external 1.2 V supply?
The KSZ8051MNL-TR provides its own 1.2 V supply for the internal analog core. The KSZ8051 reference schematic identifies VDD_1.2 at pin 2 and instructs designers to decouple that rail with the specified local capacitors. This integration reduces external supply complexity, but the device still requires its main single-supply input and normal input/output decoupling. Follow the manufacturer reference schematic for capacitor placement and values.
KSZ8051MNL-TR vs KSZ8051MNLV-TR: which should I choose?
The KSZ8051MNL-TR and KSZ8051MNLV-TR are both listed as 32-QFN, 5 x 5 mm MII Ethernet PHYs, so both preserve the physical footprint. The manufacturer materials do not establish whether every electrical, temperature, or qualification parameter is identical, so confirm those limits in the datasheet before substitution. KSZ8051MNLV-TR is also listed as an active automotive PHY alternative in the same family, but a footprint match alone does not guarantee unconditional drop-in interchangeability.
Can KSZ8051RNL-TR replace KSZ8051MNL-TR?
KSZ8051RNL-TR is a closely related member of the KSZ8051 family and the manufacturer datasheet addresses the KSZ8051MNL/RNL devices together. Both are associated with the same 10BASE-T/100BASE-TX automotive PHY family and 32-QFN implementation. Before using it as a drop-in replacement, compare the MNL and RNL order-code rows, supply limits, temperature grade, pin assignments, strap resistors, and qualification markings in the manufacturer documentation.
What is the best drop-in replacement for KSZ8051MNL-TR?
KSZ8051MNLV-TR is the closest confirmed same-footprint candidate because the manufacturer channel lists it as a MII transceiver in the same 32-QFN, 5 x 5 mm package. Its detailed parameter differences are not stated in the available manufacturer listing, so confirm the voltage, temperature, strap, and qualification requirements before production use. KSZ8051RNL-TR is another family candidate, but the MNL/RNL order-code differences must also be verified.
When should I choose KSZ8051MNL-TR instead of a newer 32-QFN PHY?
Choose KSZ8051MNL-TR when the design specifically requires its established MII interface, automotive qualification, supply arrangement, and validated board layout. A newer 32-QFN PHY may use a serial interface, alter pin assignments, or change configuration registers even when the package dimensions match. The Microchip KSZ8051-to-KSZ8081/KSZ8091 migration material documents hardware and software differences, illustrating why a same-package device should not be assumed interchangeable.
Is KSZ8051MNL-TR compatible with an MII-based network controller?
Yes, KSZ8051MNL-TR provides a full MII interface for connection to a compatible Ethernet MAC or network controller. The MII path carries parallel data, control, and status signals between the digital controller and the PHY’s 10BASE-T/100BASE-TX physical layer. The controller must match the required MII signaling levels, timing, and configuration. IEEE 802.3 MDIO management is also supported for PHY monitoring and control.
What is the lead time for KSZ8051MNL-TR?
The current lead time for KSZ8051MNL-TR should be requested through the Request a Quote form on this page. Lead time can vary with order quantity, manufacturing schedule, and the exact tape-and-reel ordering option, so a static figure would not represent current purchasing conditions. Provide the required quantity, delivery target, and destination when requesting a quotation to obtain a current commitment.
Where can I buy KSZ8051MNL-TR online?
Use the Request a Quote form on this page to inquire about KSZ8051MNL-TR availability, current commercial terms, and delivery scheduling. The exact ordering option is KSZ8051MNL-TR in tape-and-reel packaging. Before ordering, confirm that your design uses the 32-QFN, 5 x 5 mm footprint and that the base device suffix and automotive requirements match the intended product configuration.
What is the price of KSZ8051MNL-TR?
A current KSZ8051MNL-TR quotation can be requested through the Request a Quote form on this page. The structured offer on this page is used to display current purchasing information when available, while the form covers quote-based and volume-order requirements. Include the required reel quantity, schedule, and shipping destination when requesting terms for the exact -TR ordering option.
Is KSZ8051MNL-TR in stock?
Current KSZ8051MNL-TR availability should be confirmed through the Request a Quote form on this page. Because this product is ordered as an exact automotive Ethernet PHY with a defined reel packing option, purchasing teams should request a quantity-specific stock and delivery confirmation rather than rely on a generic catalog quantity. Include the required delivery date in the request for an actionable supply response.
What are the key specifications of KSZ8051MNL-TR that engineers should know?
The KSZ8051MNL-TR combines 10BASE-T/100BASE-TX operation, one Ethernet transceiver, a full MII host interface, IEEE 802.3 MDIO management, single-supply architecture, an internal 1.2 V rail, AEC-Q100 qualification, and a 32-QFN 5 x 5 mm package. These characteristics place it in the automotive Ethernet interface-IC category. The manufacturer datasheet should be used for electrical limits, timing, temperature range, exact pinout, and decoupling values.
Is KSZ8051MNL-TR the same as KSZ8051MNL?
KSZ8051MNL and KSZ8051MNL-TR identify the same 32-QFN Ethernet PHY family with -TR denoting the tape-and-reel ordering option. The basic functional description is the same: a single-supply 10BASE-T/100BASE-TX automotive PHY with full MII and MDIO support. Ordering code differences can affect reel packing and procurement rather than electrical function, so verify the complete part marking and assembly requirements before treating the suffixes as interchangeable in documentation.

נתוני עזר הנדסיים עבור KSZ8051MNL-TR — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Choose KSZ8051MNL-TR for a qualified automotive 10BASE-T/100BASE-TX design that uses a full MII controller interface and requires the established 32-QFN reference layout. It is particularly suitable when the exact MNL order code matches the required temperature and qualification conditions. KSZ8051MNLV-TR may be preferable when it offers a required qualification or lifecycle configuration, but its electrical differences must be checked against the manufacturer ordering information. KSZ8051RNL-TR is useful when the RNL suffix satisfies the system requirements and the MNL/RNL strap, temperature, and supply limits are equivalent. Do not substitute newer 32-QFN PHYs solely by package size: the Microchip migration documentation confirms that pin assignments and registers can change even when the package remains 32-QFN.

השוואה עם חלופות

פרמטר מוצר זה KSZ8051MNLV-TR KSZ8051RNL-TR
Package 32-QFN (5 x 5 mm) 32-QFN (5 x 5 mm) 32-QFN (5 x 5 mm)
Brand Microchip Technology Microchip Technology Microchip Technology
Ethernet Support 10BASE-T/100BASE-TX 10BASE-T/100BASE-TX 10BASE-T/100BASE-TX
Host Interface Full MII MII MII
Automotive Qualification AEC-Q100 standard qualified Automotive PHY Automotive PHY
Transceiver Count 1 transceiver 1 transceiver 1 transceiver

מבדילים עיקריים

  • Automotive qualification with established 10/100 MII PHY architecture (לעומתKSZ8051MNLV-TR)
  • Same-package family alternative with the same nominal Ethernet classes (לעומתKSZ8051RNL-TR)
  • Single-supply architecture with an integrated 1.2 V core rail (לעומתKSZ8051MNLV-TR)

הערות תכנון

Follow the KSZ8051 reference schematic for capacitor placement. Place the main supply bypass capacitor at the corresponding power pin and decouple VDD_1.2 at pin 2 with the components shown in the reference design. Keep the loop formed by each capacitor and its power pin as short as practical, and connect the exposed thermal pad to the ground plane using the manufacturer’s recommended thermal-via arrangement.

Route the Ethernet differential pair as a controlled-impedance pair and avoid introducing stubs or unnecessary vias. Keep the PHY-side copper path and network transformer connection away from clocks, switching regulators, and high-current return paths. Provide a continuous ground reference beneath the analog section, and avoid placing test pads or unrelated high-speed traces in the sensitive differential-channel region.

Do not treat every 32-QFN Ethernet PHY as a drop-in replacement. The manufacturer migration material for KSZ8051, KSZ8081, and KSZ8091 identifies hardware pin and software register differences. Confirm package pin names, strap-resistor values, supply levels, interface type, and register behavior for every proposed substitution, and perform a hardware and network regression test before production release.

Use the manufacturer’s transformer, line-side component, and printed-circuit recommendations as a coordinated network. The PHY, magnetics, cable, and connector must be validated as one channel because undocumented impedance transitions or mismatched termination can degrade return loss and cause link errors. Review the maximum supported cable length, topology, and common-mode requirements for the exact system rather than relying only on the nominal 10BASE-T or 100BASE-TX label.

מידע על תאימות

RoHS
Unknown
REACH
Unknown
AEC-Q100
Qualified
נטול עופרת
Unknown
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

Microchip Technology identifies the KSZ8051 as AEC-Q100 standard qualified for automotive applications. The other compliance fields are unknown because no explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration was included in the manufacturer listing.

חיפושים קשורים

KSZ8051MNL-TR datasheet KSZ8051MNL-TR pinout KSZ8051MNL-TR datasheet pdf KSZ8051MNL-TR equivalent KSZ8051MNL-TR replacement KSZ8051MNL-TR vs KSZ8051MNLV-TR KSZ8051 32-QFN Ethernet PHY KSZ8051 automotive Ethernet PHY Microchip KSZ8051MNL-TR KSZ8051MNL-TR price KSZ8051MNL-TR stock KSZ8051 reference schematic

רכיבים ומונחים קשורים

Microchip Technology KSZ8051MNL-TR KSZ8051MNLV-TR KSZ8051RNL-TR KSZ8051 Ethernet PHY 10BASE-T 100BASE-TX Media Independent Interface MII IEEE 802.3 MDIO Automotive Ethernet AEC-Q100 32-QFN QFN family surface mount single-supply power architecture internal 1.2 V rail CAT-5 twisted pair Ethernet transformer embedded network controller automotive gateway physical-layer transceiver interface IC
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר