KSZ8051MNL-TR - 10/100 Ethernet PHY | Microchip Technology
料号: KSZ8051MNL-TR ✓ 量产中KSZ8051MNL-TR 概述
An Ethernet physical-layer transceiver, or Ethernet PHY, converts digital frames exchanged with a network controller into electrical signals suitable for twisted-pair transmission and reconstructs incoming signals for the MAC. The PHY sits between the Ethernet MAC and the transformer-coupled network cable, implementing the physical signaling required by 10BASE-T and 100BASE-TX networks. The KSZ8051 therefore belongs to the interface-IC hierarchy: Ethernet PHY, network interface, integrated circuit, and semiconductor.
The KSZ8051 supports both 10BASE-T and 100BASE-TX operation from a single supply. Its full Media Independent Interface provides parallel data, control, and status connections to a compatible Ethernet controller. IEEE 802.3 MDIO management support allows an upper-layer controller to monitor and control PHY status. According to the Microchip product page, the highly integrated PHY reduces board cost and simplifies layout, while the internal 1.2 V rail eliminates the need for a separate 1.2 V supply at the device level.
The automotive qualification is a defining feature for this family. Automotive electronic systems require predictable operation across demanding temperature, vibration, and EMC environments. AEC-Q100 qualification makes the KSZ8051 suitable for qualified vehicle-network designs when the complete system also satisfies applicable automotive EMC and network requirements. The MNL suffix identifies the 32-QFN device, and the -TR suffix identifies the tape-and-reel ordering option.
Typical uses include automotive Ethernet gateways, body and chassis controllers, infotainment systems, vehicle access networks, and industrial or embedded Ethernet equipment using MII-connected controllers. In these systems, the PHY handles the physical layer while the host controller handles frames, protocol processing, and higher-layer networking. The MII boundary keeps the PHY suitable for controllers designed around a parallel bus rather than a serial Media Independent Interface.
Layout is especially important because the PHY interfaces directly to a cable transformer through differential analog pins. Decoupling capacitors should be placed at the supply pins, the 1.2 V output should be decoupled as directed by the reference design, and the analog pair should follow the manufacturer’s differential-routing and return-path guidance. Keeping switching circuitry and high-current paths away from the PHY reduces susceptibility to radiated and conducted noise.
This page consolidates the device function, qualified automotive positioning, package details, interface information, migration considerations, practical layout guidance, and confirmed same-footprint alternatives. It also distinguishes a true replacement from a related 32-QFN Ethernet PHY whose pins or registers differ, helping engineers avoid replacements that require schematic or firmware changes.
直接替换替代料: KSZ8051MNL-TR ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: KSZ8051MNL-TR (相同外形与封装尺寸) ——差异在于 Automotive Qualification, Device Type, Management Interface, Package.
KSZ8051MNLV-TR
✅ 直接替换📋 参考替代料(不在目录中)
KSZ8051RNL-TR
✅ 直接替换联系询价
查看数据手册 →KSZ8051MNL-TR 规格参数
| Device Type | 10BASE-T/100BASE-TX automotive Ethernet physical-layer transceiver |
| Ethernet Speed Support | 10BASE-T and 100BASE-TX |
| Transceiver Count | 1 transceiver |
| Host Interface | Full MII |
| Management Interface | IEEE 802.3 MDIO |
| Supply Architecture | Single supply |
| Internal Core Supply | 1.2 V |
| Automotive Qualification | AEC-Q100 standard qualified |
| 封装 | 32-QFN (5 x 5 mm) |
| 安装类型 | Surface mount |
| 引脚数 | 32 pins |
| Cable Standard | CAT-5 twisted-pair network cable |
KSZ8051MNL-TR 32-qfn (5 x 5 mm) 引脚配置指南
KSZ8051MNL-TR(32-qfn (5 x 5 mm) 封装)的引脚配置。 引脚编号、功能和连接图在制造商数据手册中定义。请参阅该手册以了解确切的封装尺寸和焊接指南。
暂无详细引脚数据: KSZ8051MNL-TR.
请参阅 数据手册 以查看完整引脚配置。
典型应用
KSZ8051MNL-TR 适用于 6 应用s: Automotive Ethernet Gateway, Body Control Module Networking, Vehicle Infotainment Ethernet, Industrial Embedded Ethernet, Automotive Diagnostics and Service Network, Embedded Network Controller Interface.
Automotive Ethernet Gateway
The KSZ8051MNL-TR fits an automotive Ethernet gateway where a controller must connect a 10BASE-T or 100BASE-TX network. Its full MII interface separates frame handling in the MAC from physical signaling in the PHY, while the AEC-Q100-qualified 32-QFN device supports compact board construction. The internal 1.2 V rail and local decoupling requirements can simplify analog supply planning, but the implementation must preserve the manufacturer’s reference layout. For an automotive design, verify temperature grade, EMC behavior, cable reach, and system fault requirements rather than treating PHY qualification as complete network certification.
推荐
Body Control Module Networking
The KSZ8051MNL-TR can serve as the physical-layer endpoint in a body-control module that exchanges diagnostic or control traffic over an Ethernet network. The single-supply architecture, 10BASE-T/100BASE-TX support, and MII host connection allow an embedded controller with a parallel Ethernet interface to participate directly in the physical link. AEC-Q100 standard qualification supports automotive platform selection, provided the exact order code satisfies the required temperature and qualification conditions. Keep the analog differential pair isolated from switching nodes and route it according to the manufacturer reference schematic to reduce susceptibility to vehicle electrical noise.
推荐
Vehicle Infotainment Ethernet
KSZ8051MNL-TR is appropriate for an infotainment Ethernet node requiring a qualified 10BASE-T/100BASE-TX physical layer and a conventional parallel host interface. The PHY can terminate the physical network side while an MII-compatible controller handles packet processing and connectivity to audio, display, and vehicle-service subsystems. Its 32-QFN, 5 x 5 mm package supports space-constrained boards, although careful decoupling and analog routing remain necessary. The design team should evaluate electromagnetic immunity, ground architecture, connector choice, and cable topology at the vehicle level in addition to the PHY’s AEC-Q100 status.
推荐
Industrial Embedded Ethernet
The KSZ8051MNL-TR can be used in an embedded industrial controller that needs 10BASE-T or 100BASE-TX connectivity through a full MII interface. It is particularly useful where a host processor already exposes MII timing and control signals, avoiding the need for a different serial PHY architecture. The integrated 1.2 V rail reduces the number of externally generated analog rails, while the small QFN package supports compact assemblies. For industrial use, confirm the order code’s electrical and temperature limits, implement the reference decoupling, and preserve controlled return paths around the analog pins.
推荐
Automotive Diagnostics and Service Network
KSZ8051MNL-TR can support a diagnostics or service-network node that exchanges frames between an embedded Ethernet controller and a vehicle network. The MII interface gives the controller direct PHY access, and MDIO permits an upper layer to query and control physical-layer status. Its qualified automotive positioning is useful for platform programs, while its 10BASE-T/100BASE-TX support allows the same PHY design to accommodate different network rates. During implementation, define cable length and topology limits, termination requirements, and diagnostic fault behavior at the system level, because these conditions extend beyond the component’s basic link-rate specification.
推荐
Embedded Network Controller Interface
KSZ8051MNL-TR is suitable for an embedded network-controller design that already uses a full MII boundary. The PHY supplies the 10BASE-T/100BASE-TX line-side signaling while the controller handles frames, addressing, and protocol functions. The 32-QFN package provides a compact solution, and the internal 1.2 V output can reduce external supply complexity when the reference circuit is followed. Designers should pay particular attention to simultaneous switching noise, supply sequencing, exposed-pad grounding, and separation between the analog network path and digital controller circuitry to maintain deterministic Ethernet operation.
推荐
推荐产品汇总
工程参考数据: KSZ8051MNL-TR ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | KSZ8051MNLV-TR | KSZ8051RNL-TR |
|---|---|---|---|
| Package | 32-QFN (5 x 5 mm) | 32-QFN (5 x 5 mm) | 32-QFN (5 x 5 mm) |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology |
| Ethernet Support | 10BASE-T/100BASE-TX | 10BASE-T/100BASE-TX | 10BASE-T/100BASE-TX |
| Host Interface | Full MII | MII | MII |
| Automotive Qualification | AEC-Q100 standard qualified | Automotive PHY | Automotive PHY |
| Transceiver Count | 1 transceiver | 1 transceiver | 1 transceiver |
关键差异点
- Automotive qualification with established 10/100 MII PHY architecture (对比 KSZ8051MNLV-TR)
- Same-package family alternative with the same nominal Ethernet classes (对比 KSZ8051RNL-TR)
- Single-supply architecture with an integrated 1.2 V core rail (对比 KSZ8051MNLV-TR)
设计说明
Follow the KSZ8051 reference schematic for capacitor placement. Place the main supply bypass capacitor at the corresponding power pin and decouple VDD_1.2 at pin 2 with the components shown in the reference design. Keep the loop formed by each capacitor and its power pin as short as practical, and connect the exposed thermal pad to the ground plane using the manufacturer’s recommended thermal-via arrangement.
Route the Ethernet differential pair as a controlled-impedance pair and avoid introducing stubs or unnecessary vias. Keep the PHY-side copper path and network transformer connection away from clocks, switching regulators, and high-current return paths. Provide a continuous ground reference beneath the analog section, and avoid placing test pads or unrelated high-speed traces in the sensitive differential-channel region.
Do not treat every 32-QFN Ethernet PHY as a drop-in replacement. The manufacturer migration material for KSZ8051, KSZ8081, and KSZ8091 identifies hardware pin and software register differences. Confirm package pin names, strap-resistor values, supply levels, interface type, and register behavior for every proposed substitution, and perform a hardware and network regression test before production release.
Use the manufacturer’s transformer, line-side component, and printed-circuit recommendations as a coordinated network. The PHY, magnetics, cable, and connector must be validated as one channel because undocumented impedance transitions or mismatched termination can degrade return loss and cause link errors. Review the maximum supported cable length, topology, and common-mode requirements for the exact system rather than relying only on the nominal 10BASE-T or 100BASE-TX label.
合规信息
Microchip Technology identifies the KSZ8051 as AEC-Q100 standard qualified for automotive applications. The other compliance fields are unknown because no explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration was included in the manufacturer listing.