onsemi

MC33178PG - Dual Low-Power Low-Noise Op Amp | onsemi

MPN: MC33178PG ✗ जीवन की समाप्ति
2 V to 18 V Vdss 8-pin PDIP Package
न्यूनतम ऑर्डर मात्रा: 1 |

MC33178PG अवलोकन

The onsemi MC33178PG is a dual, bipolar operational amplifier packaged in an 8-pin PDIP. It operates from 2 V to 18 V, is intended for low-power industrial signal-processing applications, and offers a gain-bandwidth product of 5 MHz. The device uses high-frequency PNP input transistors to provide low input offset voltage, low noise, and low distortion.

An operational amplifier is a high-gain analog signal-conditioning component used in instrumentation, audio, and data-processing circuits. It compares an input signal with a feedback reference to amplify voltage differences. Within the broader semiconductor hierarchy, the MC33178PG belongs to the operational-amplifier, analog-amplifier, and signal-conditioning IC families.

The MC33178 family combines two amplifiers in one package, reducing board area for dual-channel designs. Its bipolar construction supports low-noise analog signal handling, while the PNP input stage is intended to improve offset voltage and distortion performance. The manufacturer identifies the family for quality audio and data-signal-processing applications.

The MC33178PG operates from 2 V to 18 V, making it suitable for low-voltage industrial systems as well as conventional dual-supply analog circuits. A typical dual op-amp layout uses pins 1 and 7 as outputs, pins 2 and 6 as inverting inputs, pins 3 and 5 as non-inverting inputs, and pins 4 and 8 as the negative and positive supplies.

Typical applications include audio preamplification, low-level sensor conditioning, active filtering, instrumentation, and general-purpose analog signal processing. When operating from a single supply, the input and output signal levels must remain within the input common-mode range and output swing limits specified by the manufacturer datasheet.

For stable operation, follow the datasheet requirements for bypassing the positive supply and configure feedback so that the required noise gain and closed-loop bandwidth remain compatible with the intended signal path. Avoid placing input and output traces beside unrelated high-current switching nodes to reduce coupling.

This page combines the manufacturer's device description with application-oriented guidance, pin organization, package information, and a conservative replacement comparison. It also identifies which drop-in alternatives have documented package compatibility and where final electrical verification remains necessary before a substitution is approved.

के लिए ड्रॉप-इन विकल्प MC33178PG — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।

इस सीरीज़ के वेरिएंट

समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं MC33178PG (समान फॉर्म फैक्टर और फुटप्रिंट) — इसमें भिन्न Mounting Type, Amplifier Type, Number of Pins, Package, RoHS Status.

onsemi
Amplifier Type: Quad general-purpose operational amplifier
Number of Pins: 14 pins
Package: 14-PDIP, 0.300 in (7.62 mm) pitch
इसके साथ तुलना करें MC33178PG →
Texas Instruments
Mounting Type: Through-Hole (PDIP)
Amplifier Type: Low-Noise Operational Amplifier
RoHS Status: Compliant (Pb-free)
इसके साथ तुलना करें MC33178PG →

MC33179PG

✅ ड्रॉप-इन
onsemi
📦 8-pin PDIP
Quad general-purpose operational amplifier · 4 channels · 5 MHz · 2 V to 18 V · 14-PDIP, 0.300 in (7.62 mm) pitch · Through-hole · Bipolar with high-frequency PNP input transistors · Industrial temperature range

कीमत के लिए संपर्क करें

डेटाशीट देखें →

NE5532AP

✅ ड्रॉप-इन
Texas Instruments
📦 8-pin PDIP
Texas Instruments · NE5532AP · Low-Noise Operational Amplifier · 2 (Dual) · 8-PDIP (through-hole, 2.54 mm pitch) · ±5 V to ±15 V (max ±18 V) · 10 MHz (typ.) · 5 nV/√Hz (typ. at 1 kHz)

कीमत के लिए संपर्क करें

डेटाशीट देखें →

MC33178P

✅ ड्रॉप-इन
📦 8-pin PDIP
Uses the same MC33178PG device and 8-pin PDIP outline, with the principal difference being the ordering or packaging suffix

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

MC33178PG Maximum Ratings और Electrical Characteristics

Amplifier Count 2 amplifiers
Product Type Dual operational amplifier
Supply Voltage Range 2 V to 18 V
Gain-Bandwidth Product 5 MHz
Technology Bipolar
Input Transistor Type High-frequency PNP
पैकेज 8-pin PDIP
पिन की संख्या 8 pins
माउंटिंग प्रकार Through-hole
Temperature Grade Industrial temperature
RoHS स्थिति unknown
REACH Status unknown
AEC-Q100 Qualification not_applicable

MC33178PG पिन कॉन्फ़िगरेशन

DIP-8 Package Pinout Diagram DIP-8 8-pin dual inline, 7.62mm pitch, JEDEC MS-001. 1 8 2 7 3 6 4 5 DIP-8
पिन 1 OUTA — Amplifier A output
पिन 2 INA− — Amplifier A inverting input
पिन 3 INA+ — Amplifier A non-inverting input
पिन 4 V− — Negative power supply
पिन 5 INB+ — Amplifier B non-inverting input
पिन 6 INB− — Amplifier B inverting input
पिन 7 OUTB — Amplifier B output
पिन 8 V+ — Positive power supply

सामान्य अनुप्रयोग

MC33178PG के लिए उपयुक्त है 6 अनुप्रयोगs: Audio Preamplifier, Industrial Sensor Conditioning, Active Audio Filter, Instrumentation Buffering, Low-Noise Data Acquisition, Power Supply Control Signal.

🎧

Audio Preamplifier

The MC33178PG fits low-level audio preamplification because its bipolar PNP input stage is designed for low input offset voltage, low noise, and low distortion. Each amplifier can provide gain and buffering around a microphone, line-level, or instrumentation signal while the 2 V to 18 V operating range supports several industrial supply arrangements. With a 5 MHz gain-bandwidth product, it also offers useful bandwidth for audio-band circuitry, but the selected closed-loop gain must preserve stability. Confirm the input common-mode range, output swing, and load capability in the manufacturer datasheet for single- or dual-supply operation.

🏭

Industrial Sensor Conditioning

The MC33178PG is suitable for conditioning low-level sensor outputs when low offset voltage, low noise, and low distortion are important. Its dual-amplifier organization can support an instrumentation stage without requiring two separate packages, while the 5 MHz gain-bandwidth product gives designers room for moderate-gain filtering and buffering. The 2 V minimum operating voltage also fits low-voltage industrial electronics. Before implementation, verify the sensor's common-mode voltage, output impedance, required settling time, and noise bandwidth, then use the datasheet guidance to select external compensation and bypass capacitance.

🎚️

Active Audio Filter

The MC33178PG can implement active filtering for audio and low-frequency industrial signals because it combines a 5 MHz gain-bandwidth product with a dual-amplifier package. Two independent amplifier sections can be used for a state-variable filter, low-pass stage, or buffered active network. The bipolar PNP input architecture is intended to preserve low noise and low distortion through the signal path. Component tolerances and amplifier gain-bandwidth behavior will determine the filter's actual response, so the design should be checked for stability, output swing, and component loading against the manufacturer datasheet.

📟

Instrumentation Buffering

The MC33178PG is appropriate for instrumentation buffering when a design needs two low-noise bipolar amplifier sections in one 8-pin PDIP. It can buffer inputs before an ADC, drive a balanced stage, or provide gain around a reference network. The PNP input transistors support low offset voltage and distortion, while the 2 V to 18 V supply range accommodates compact industrial signal chains. The final circuit must account for input bias-current error, common-mode limits, capacitive loading, and output drive. Confirm these conditions and the recommended layout using the manufacturer datasheet.

🖥️

Low-Noise Data Acquisition

The MC33178PG can serve as an analog front-end amplifier in a low-noise data-acquisition system. Its bipolar implementation and highlighted low-noise, low-offset characteristics are useful when amplifying small sensor or measurement signals before digitization. The 5 MHz gain-bandwidth product allows the amplifier to operate at moderate closed-loop gains, although the minimum useful gain and stability margin must be established from the datasheet. Keep input traces short, maintain suitable return paths, and check the acquisition system's input bandwidth and sampling requirements before selecting external compensation.

⚡

Power Supply Control Signal

The MC33178PG can be used in control and monitoring loops associated with industrial power systems where its dual bipolar amplifiers provide local gain and buffering. The 2 V to 18 V operating range allows operation from low-voltage control rails, and the 5 MHz gain-bandwidth product is sufficient for many slow feedback or supervisory loops. A designer can use one section for error amplification and the other for sensing or buffering. Because the device is intended for general-purpose analog signal processing rather than power-stage drive, verify output current, saturation behavior, and thermal performance against the actual load before using it in a critical loop.

What is the onsemi MC33178PG?
The onsemi MC33178PG is a dual low-power, low-noise bipolar operational amplifier in an 8-pin PDIP package. According to the manufacturer datasheet, the MC33178/9 family uses high-frequency PNP input transistors to produce low input offset voltage, low noise, and low distortion for audio and data signal processing.
What is the supply voltage range of the MC33178PG?
The MC33178PG operates from 2 V to 18 V. This range allows the dual amplifier to be used in low-voltage industrial equipment as well as systems using conventional bipolar analog supplies. The manufacturer identifies the MC33178PG as an industrial-temperature, general-purpose dual operational amplifier.
What is the gain-bandwidth product of the MC33178PG?
The MC33178PG has a 5 MHz gain-bandwidth product. This figure describes the nominal operating bandwidth of the bipolar amplifier and provides the starting point for selecting an appropriate closed-loop gain. Confirm the required noise gain, stability, and output-drive conditions against the manufacturer datasheet.
Where can I download the MC33178PG datasheet PDF?
The MC33178PG manufacturer datasheet PDF is available from onsemi at https://www.onsemi.com/pdf/datasheet/mc33178-d.pdf. It contains the device description, electrical characteristics, representative circuits, package information, and pin descriptions needed for schematic capture and PCB design.
Where can I find the MC33178PG pinout?
The MC33178PG pinout is shown in the manufacturer datasheet and follows the standard dual operational-amplifier arrangement: pin 1 is OUTA, pin 2 is INA−, pin 3 is INA+, pin 4 is V−, pin 5 is INB+, pin 6 is INB−, pin 7 is OUTB, and pin 8 is V+. Use the package drawing when assigning PCB connections.
Is the MC33178PG suitable for audio preamplifier circuits?
The MC33178PG is suitable for low-level audio preamplification because the manufacturer specifically describes the MC33178/9 family for quality audio signal processing. Its bipolar implementation and PNP input stage support low-noise, low-distortion amplification, although the exact gain, bandwidth, and output-swing limits must be checked in the datasheet.
Can the MC33178PG be used with a single 5 V supply?
The MC33178PG can operate from a 5 V supply because its rated supply range extends from 2 V to 18 V. With single-supply operation, the input common-mode voltage and output swing must remain inside the datasheet limits. Input and output biasing or AC coupling may therefore be required around the signal path.
How do I decouple the MC33178PG power supply?
Place a bypass capacitor close to pin 8, V+, and connect the negative supply at pin 4 with an appropriate return path. The manufacturer datasheet's recommended application circuit and decoupling guidance should be followed because an excessive lead length between the capacitor and the device can reduce stability or increase noise coupling.
What is the difference between MC33178PG and MC33179PG?
The MC33179PG belongs to the same MC33178/9 bipolar family and is associated with the same 8-pin PDIP package, but it is a different amplifier variant rather than the identical device. Before substituting it, compare the electrical-characteristics tables, especially bandwidth, slew rate, output drive, common-mode range, and noise performance.
What is the best drop-in replacement for MC33178PG?
No universally identical replacement can be confirmed from the available documentation. MC33179PG is the closest same-family 8-pin PDIP candidate, while NE5532AP is a documented 8-pin dual amplifier comparison candidate. Neither should be treated as an automatic replacement until supply voltage, gain-bandwidth product, slew rate, input bias current, noise, output swing, and stability requirements are checked.
Can NE5532AP replace the MC33178PG?
NE5532AP may share the 8-pin PDIP format, but package format alone does not establish drop-in compatibility. The MC33178PG has a 5 MHz gain-bandwidth product and bipolar PNP input stage, so an NE5532AP substitution requires a complete comparison of input bias current, offset voltage, noise, common-mode range, output swing, and supply current before approval.
When should I choose the MC33178PG over a general-purpose dual op amp?
Choose the MC33178PG when the design specifically benefits from a low-power bipolar dual amplifier with a 5 MHz gain-bandwidth product and PNP input characteristics. It is particularly relevant to low-level audio and industrial signal-processing stages where the manufacturer highlights low noise, low offset voltage, and low distortion.
Where can I buy MC33178PG and what is its current availability?
Use the Request a Quote form on this page to request the current MC33178PG availability, minimum order quantity, and lead time. The manufacturer part is described as obsolete in a comparison listing, so a complete replacement assessment and lifecycle confirmation should be included in the request rather than assuming immediate supply.
What is the price of MC33178PG?
Current commercial terms for the MC33178PG should be requested through the Request a Quote form on this page. Because the part is obsolete, stock and lead time can vary by quantity and packaging, and a quote allows the request to be matched against the exact MC33178PG ordering code.
Is the MC33178PG still in production?
The MC33178PG is listed as obsolete in the available product comparison information. For a new design, use the lifecycle status to begin an alternative and migration review. MC33179PG and NE5532AP can be evaluated as 8-pin candidates, but their electrical characteristics must be compared before any drop-in claim is made.
What are the key specifications of MC33178PG that engineers should know?
The key MC33178PG specifications are two amplifiers per package, a 2 V to 18 V supply range, a 5 MHz gain-bandwidth product, bipolar PNP input construction, and an 8-pin PDIP package. The manufacturer also highlights low input offset voltage, low noise, and low distortion for audio and data signal-processing applications.

के लिए इंजीनियरिंग संदर्भ डेटा MC33178PG — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।

चयन गाइड

Select the MC33178PG for an existing 8-pin PDIP design that requires a low-power, low-noise bipolar dual amplifier and can still source the exact obsolete device. Its documented 2 V to 18 V supply range, 5 MHz gain-bandwidth product, and PNP input stage fit low-level audio, sensor-conditioning, and general industrial signal-processing circuits. Evaluate MC33179PG first when a same-family alternative can meet the electrical requirements, but compare bandwidth, slew rate, offset, bias current, noise, and output swing rather than relying on package identity alone. Consider NE5532AP when its electrical characteristics satisfy the signal chain and its lifecycle terms are commercially preferable. MC33178P has the closest device identity and package, but its ordering suffix and sourcing arrangement must be confirmed. For any new production design, prioritize an electrically qualified, currently supported device over the obsolete target.

विकल्पों के साथ तुलना

पैरामीटर यह उत्पाद MC33179PG NE5532AP MC33178P
Package 8-pin PDIP 8-pin PDIP 8-pin PDIP 8-pin PDIP
Brand onsemi onsemi Texas Instruments onsemi
Amplifier Count 2 amplifiers 2 amplifiers 2 amplifiers 2 amplifiers

मुख्य विशेषताएँ

  • Documented low-noise bipolar signal-processing architecture (बनामNE5532AP)
  • Low-voltage operating range (बनामNE5532AP)
  • Same-family package-compatible migration candidate (बनामMC33179PG)

डिज़ाइन नोट्स

Place the supply-bypass capacitor close to pin 8, V+, and provide a short return path to pin 4, V−. Keep amplifier input pins away from output pins and switching-node traces to minimize parasitic coupling. In dual-amplifier layouts, preserve independent feedback routing for each channel so output currents do not share high-impedance paths.

Do not assume that an 8-pin PDIP replacement is electrically interchangeable solely because the outline matches. Before approving MC33179PG or NE5532AP, compare input offset voltage, bias current, noise, common-mode range, output swing, slew rate, supply current, and stability. Single-supply designs also require checks for input and output signal-headroom violations.

The 5 MHz gain-bandwidth product is the main high-frequency constraint. Select the closed-loop gain and feedback network so the required signal bandwidth remains below the amplifier's stable operating range. Add compensation capacitance only as directed by the manufacturer datasheet, and test capacitive loading because excessive load can reduce phase margin and cause ringing.

अनुपालन जानकारी

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
लीड फ्री
Unknown
हैलोजन फ्री
Unknown
कॉन्फ्लिक्ट मिनरल्स
Unknown

The available information identifies the MC33178PG as a general-purpose industrial-temperature operational amplifier but does not establish current RoHS, REACH, lead-free, halogen-free, or conflict-minerals status. The PDIP package is not an automotive-qualified package.

डेटा सत्यापन तिथि: 2026-11-16 — डेटा XAIPART की कंपोनेंट इंजीनियरिंग टीम द्वारा सत्यापित और क्यूरेट किया गया

संबंधित खोजें

MC33178PG datasheet MC33178PG pinout MC33178PG datasheet pdf onsemi MC33178PG MC33178PG equivalent MC33178PG replacement MC33178PG cross reference MC33178PG vs NE5532AP MC33178PG footprint MC33178PG price MC33178PG stock MC33178PG 5 MHz op amp MC33178PG low noise amplifier MC33178PG audio preamplifier What can replace MC33178PG?

संबंधित कंपोनेंट्स और शब्द

onsemi MC33178PG MC33178P MC33179PG NE5532AP dual operational amplifier operational amplifier analog amplifier signal-conditioning IC semiconductor bipolar technology PNP input transistor low-dropout low-noise amplification input offset voltage gain-bandwidth product 5 MHz 2 V to 18 V 8-pin PDIP DIP package through-hole mounting audio signal processing industrial instrumentation low-power analog circuit
त्वरित क़ौतिल आदेश (RFQ)
पूर्ण विवरण भरें — हमारी सेल्स टीम 24 घंटे के भीतर जवाब देगी
पार्ट नंबर निर्माता पैकेज QTY लक्ष्य कीमत विस्तारित
✓
उद्धरण प्रस्तुत!

हम आपकी ईमेल पर 24 घंटे के भीतर जवाब देंगे

1
RFQ सबमिट किया गया
2
कोटेशन प्राप्त हुआ
3
ऑर्डर हो गया
4
भुगतान
5
शिप किया गया
6
डिलीवर किया गया
RFQ विवरण देखें