MC33178PG - Dual Low-Power Low-Noise Op Amp | onsemi
MPN: MC33178PG ✗ 停產MC33178PG 概覽
An operational amplifier is a high-gain analog signal-conditioning component used in instrumentation, audio, and data-processing circuits. It compares an input signal with a feedback reference to amplify voltage differences. Within the broader semiconductor hierarchy, the MC33178PG belongs to the operational-amplifier, analog-amplifier, and signal-conditioning IC families.
The MC33178 family combines two amplifiers in one package, reducing board area for dual-channel designs. Its bipolar construction supports low-noise analog signal handling, while the PNP input stage is intended to improve offset voltage and distortion performance. The manufacturer identifies the family for quality audio and data-signal-processing applications.
The MC33178PG operates from 2 V to 18 V, making it suitable for low-voltage industrial systems as well as conventional dual-supply analog circuits. A typical dual op-amp layout uses pins 1 and 7 as outputs, pins 2 and 6 as inverting inputs, pins 3 and 5 as non-inverting inputs, and pins 4 and 8 as the negative and positive supplies.
Typical applications include audio preamplification, low-level sensor conditioning, active filtering, instrumentation, and general-purpose analog signal processing. When operating from a single supply, the input and output signal levels must remain within the input common-mode range and output swing limits specified by the manufacturer datasheet.
For stable operation, follow the datasheet requirements for bypassing the positive supply and configure feedback so that the required noise gain and closed-loop bandwidth remain compatible with the intended signal path. Avoid placing input and output traces beside unrelated high-current switching nodes to reduce coupling.
This page combines the manufacturer's device description with application-oriented guidance, pin organization, package information, and a conservative replacement comparison. It also identifies which drop-in alternatives have documented package compatibility and where final electrical verification remains necessary before a substitution is approved.
直接替換替代品,適用於 MC33178PG — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: MC33178PG (相同外形與佔位) — 差異在於 Mounting Type, Amplifier Type, Number of Pins, Package, RoHS Status.
MC33179PG
✅ 直接替換聯絡詢價
查看資料表 →NE5532AP
✅ 直接替換聯絡詢價
查看資料表 →MC33178P
✅ 直接替換📋 參考替代品(不在目錄中)
MC33178PG 最大額定值與電氣特性
| Amplifier Count | 2 amplifiers |
| Product Type | Dual operational amplifier |
| Supply Voltage Range | 2 V to 18 V |
| Gain-Bandwidth Product | 5 MHz |
| Technology | Bipolar |
| Input Transistor Type | High-frequency PNP |
| 封裝 | 8-pin PDIP |
| 腳位數 | 8 pins |
| 安裝類型 | Through-hole |
| Temperature Grade | Industrial temperature |
| RoHS 狀態 | unknown |
| REACH Status | unknown |
| AEC-Q100 Qualification | not_applicable |
MC33178PG 腳位配置
| 腳位 1 | OUTA — Amplifier A output |
| 腳位 2 | INA− — Amplifier A inverting input |
| 腳位 3 | INA+ — Amplifier A non-inverting input |
| 腳位 4 | V− — Negative power supply |
| 腳位 5 | INB+ — Amplifier B non-inverting input |
| 腳位 6 | INB− — Amplifier B inverting input |
| 腳位 7 | OUTB — Amplifier B output |
| 腳位 8 | V+ — Positive power supply |
典型應用
MC33178PG 適用於 6 應用s: Audio Preamplifier, Industrial Sensor Conditioning, Active Audio Filter, Instrumentation Buffering, Low-Noise Data Acquisition, Power Supply Control Signal.
Audio Preamplifier
The MC33178PG fits low-level audio preamplification because its bipolar PNP input stage is designed for low input offset voltage, low noise, and low distortion. Each amplifier can provide gain and buffering around a microphone, line-level, or instrumentation signal while the 2 V to 18 V operating range supports several industrial supply arrangements. With a 5 MHz gain-bandwidth product, it also offers useful bandwidth for audio-band circuitry, but the selected closed-loop gain must preserve stability. Confirm the input common-mode range, output swing, and load capability in the manufacturer datasheet for single- or dual-supply operation.
推薦
Industrial Sensor Conditioning
The MC33178PG is suitable for conditioning low-level sensor outputs when low offset voltage, low noise, and low distortion are important. Its dual-amplifier organization can support an instrumentation stage without requiring two separate packages, while the 5 MHz gain-bandwidth product gives designers room for moderate-gain filtering and buffering. The 2 V minimum operating voltage also fits low-voltage industrial electronics. Before implementation, verify the sensor's common-mode voltage, output impedance, required settling time, and noise bandwidth, then use the datasheet guidance to select external compensation and bypass capacitance.
推薦
Active Audio Filter
The MC33178PG can implement active filtering for audio and low-frequency industrial signals because it combines a 5 MHz gain-bandwidth product with a dual-amplifier package. Two independent amplifier sections can be used for a state-variable filter, low-pass stage, or buffered active network. The bipolar PNP input architecture is intended to preserve low noise and low distortion through the signal path. Component tolerances and amplifier gain-bandwidth behavior will determine the filter's actual response, so the design should be checked for stability, output swing, and component loading against the manufacturer datasheet.
推薦
Instrumentation Buffering
The MC33178PG is appropriate for instrumentation buffering when a design needs two low-noise bipolar amplifier sections in one 8-pin PDIP. It can buffer inputs before an ADC, drive a balanced stage, or provide gain around a reference network. The PNP input transistors support low offset voltage and distortion, while the 2 V to 18 V supply range accommodates compact industrial signal chains. The final circuit must account for input bias-current error, common-mode limits, capacitive loading, and output drive. Confirm these conditions and the recommended layout using the manufacturer datasheet.
推薦
Low-Noise Data Acquisition
The MC33178PG can serve as an analog front-end amplifier in a low-noise data-acquisition system. Its bipolar implementation and highlighted low-noise, low-offset characteristics are useful when amplifying small sensor or measurement signals before digitization. The 5 MHz gain-bandwidth product allows the amplifier to operate at moderate closed-loop gains, although the minimum useful gain and stability margin must be established from the datasheet. Keep input traces short, maintain suitable return paths, and check the acquisition system's input bandwidth and sampling requirements before selecting external compensation.
推薦
Power Supply Control Signal
The MC33178PG can be used in control and monitoring loops associated with industrial power systems where its dual bipolar amplifiers provide local gain and buffering. The 2 V to 18 V operating range allows operation from low-voltage control rails, and the 5 MHz gain-bandwidth product is sufficient for many slow feedback or supervisory loops. A designer can use one section for error amplification and the other for sensing or buffering. Because the device is intended for general-purpose analog signal processing rather than power-stage drive, verify output current, saturation behavior, and thermal performance against the actual load before using it in a critical loop.
推薦
推薦產品摘要
工程參考資料,適用於 MC33178PG — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | MC33179PG | NE5532AP | MC33178P |
|---|---|---|---|---|
| Package | 8-pin PDIP | 8-pin PDIP | 8-pin PDIP | 8-pin PDIP |
| Brand | onsemi | onsemi | Texas Instruments | onsemi |
| Amplifier Count | 2 amplifiers | 2 amplifiers | 2 amplifiers | 2 amplifiers |
主要差異化特點
- Documented low-noise bipolar signal-processing architecture (對比NE5532AP)
- Low-voltage operating range (對比NE5532AP)
- Same-family package-compatible migration candidate (對比MC33179PG)
設計說明
Place the supply-bypass capacitor close to pin 8, V+, and provide a short return path to pin 4, V−. Keep amplifier input pins away from output pins and switching-node traces to minimize parasitic coupling. In dual-amplifier layouts, preserve independent feedback routing for each channel so output currents do not share high-impedance paths.
Do not assume that an 8-pin PDIP replacement is electrically interchangeable solely because the outline matches. Before approving MC33179PG or NE5532AP, compare input offset voltage, bias current, noise, common-mode range, output swing, slew rate, supply current, and stability. Single-supply designs also require checks for input and output signal-headroom violations.
The 5 MHz gain-bandwidth product is the main high-frequency constraint. Select the closed-loop gain and feedback network so the required signal bandwidth remains below the amplifier's stable operating range. Add compensation capacitance only as directed by the manufacturer datasheet, and test capacitive loading because excessive load can reduce phase margin and cause ringing.
合規資訊
The available information identifies the MC33178PG as a general-purpose industrial-temperature operational amplifier but does not establish current RoHS, REACH, lead-free, halogen-free, or conflict-minerals status. The PDIP package is not an automotive-qualified package.