Microchip Technology

MCP604T-I/ST - Quad 2.8MHz Low-Power Op Amp | Microchip

MPN: MCP604T-I/ST ✓ सक्रिय
2.7 V Vdss 230 uA Id 14-pin TSSOP Package
न्यूनतम ऑर्डर मात्रा: 1 |

MCP604T-I/ST अवलोकन

The Microchip Technology MCP604T-I/ST is a quad CMOS operational amplifier with a 2.8 MHz gain-bandwidth product, 230 uA typical operating current, and a 14-pin TSSOP package. The device operates from 2.7 V to 6 V, combines four amplifiers in one package, and supports rail-to-rail output operation. Its low bias current and low operating current make it suitable for portable, industrial, instrumentation, sensor, and low-power signal-processing systems.

An operational amplifier is an active analog signal-conditioning device that uses high open-loop gain to amplify small differential inputs. The MCP604 belongs to the CMOS operational-amplifier hierarchy, where rail-to-rail output swing allows the output voltage to approach the supply rails more closely than a conventional amplifier with a restricted output range. Four independent amplifiers in the MCP604 can perform buffering, amplification, filtering, comparison, or level-shifting functions while conserving board area.

Key features include four amplifier channels, a 2.8 MHz gain-bandwidth product, 230 uA typical operating current, low input bias current, high open-loop gain, and rail-to-rail output swing. The 2.7 V to 6 V operating range allows the device to operate from single 3.3 V or 5 V rails as well as conventional low-voltage analog systems. The industrial-temperature ordering code MCP604T-I/ST identifies the temperature grade and TSSOP packaging option.

Microchip's advanced CMOS process gives the MCP604 low bias current, high-speed operation, high open-loop gain, and rail-to-rail output capability. Its 2.8 MHz gain-bandwidth product is sufficient for audio-frequency, general-purpose, and low-to-moderate-bandwidth signal paths. Because the amplifier is intended for low-power systems, stable operation also depends on correct input/output capacitor selection, suitable bypassing, and keeping sensitive input traces away from switching nodes.

Typical uses include portable sensor interfaces, low-power data acquisition, industrial transducers, audio signal conditioning, battery-powered measurement equipment, and general analog buffering. Four channels can process related signals simultaneously or provide independent gain stages around a microcontroller, ADC, or sensor network. The low operating current helps limit system power when the amplifier operates continuously, although the final system dissipation also depends on load and supply voltage.

For stable operation, place the bypass capacitor close to the supply pin, use the manufacturer-recommended feedback network, and verify output-swing and common-mode limits against the actual signal and supply levels. Avoid placing high-impedance input traces beside noisy switching paths, and use a low-impedance source where the source impedance could create bias-current errors. The TSSOP footprint also requires adequate board spacing for soldering and inspection.

This product record combines the manufacturer architecture information, exact ordering information, package details, and verified sourcing context. It also provides engineering-focused alternatives, application guidance, comparison parameters, and practical design notes to help evaluate the MCP604T-I/ST before PCB implementation.

के लिए ड्रॉप-इन विकल्प MCP604T-I/ST — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।

इस सीरीज़ के वेरिएंट

समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं MCP604T-I/ST (समान फॉर्म फैक्टर और फुटप्रिंट) — इसमें भिन्न Package, Amplifier Type, Number of Channels, Amplifier Count, Input Common-Mode Range.

Microchip Technology
Amplifier Count: 4 amplifiers
Microchip Technology
Package: 14-pin SOIC, 3.90 mm width
Amplifier Count: 4 channels
Microchip Technology
Package: 14-lead TSSOP, 4.40 mm width
Amplifier Type: Precision operational amplifier
Input Common-Mode Range: Rail-to-rail
Microchip Technology
Package: 8-TSSOP (ST)
Amplifier Type: CMOS Operational Amplifier
Number of Channels: 2 (Dual)

MCP604T-E/ST

✅ ड्रॉप-इन
Microchip Technology
📦 14-TSSOP
4 amplifiers · 2.8 MHz · 230 uA · 2.7 V · 6.0 V · Rail-to-rail

कीमत के लिए संपर्क करें

डेटाशीट देखें →

MCP604T-E/STVAO

✅ ड्रॉप-इन
📦 14-TSSOP
Automotive-oriented ordering option with the same MCP604 family, 2.8 MHz gain-bandwidth product, 230 uA typical operating current, four channels, and 14-pin TSSOP footprint.

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

MCP604T-I/SL

✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित
Microchip Technology
📦 14-TSSOP
4 channels · CMOS operational amplifier · 2.8 MHz · 2.7 V · 6.0 V · 230 µA per amplifier · 1 pA · 2.3 V/µs

कीमत के लिए संपर्क करें

डेटाशीट देखें →

MCP604T-I/ST Maximum Ratings और Electrical Characteristics

Amplifier Type Quad CMOS operational amplifier
Number of Channels 4 channels
Gain-Bandwidth Product 2.8 MHz
Typical Operating Current 230 uA
Minimum Supply Voltage 2.7 V
Maximum Supply Voltage 6 V
Output Swing Rail-to-rail
पैकेज 14-pin TSSOP
माउंटिंग प्रकार Surface mount
Process Technology Advanced CMOS

MCP604T-I/ST 14-pin tssop पिन कॉन्फ़िगरेशन गाइड

MCP604T-I/ST (14-pin tssop पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस एनालॉग कंपोनेंट में इनपुट, आउटपुट और पावर सप्लाई पिन हैं। ऑफ़सेट नल, कम्पनसेशन और एनेबल पिन कॉन्फ़िगरेशन के लिए निर्माता डेटाशीट देखें। सिग्नल कंडीशनिंग और एम्प्लीफ़ायर सर्किट के लिए आदर्श।

MCP604T-I/ST के लिए 14-pin tssop पैकेज पिनआउट आरेख

इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: MCP604T-I/ST.

देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।

सामान्य अनुप्रयोग

MCP604T-I/ST के लिए उपयुक्त है 6 अनुप्रयोगs: Portable Sensor Signal Conditioning, Industrial Transducer Interface, Low-Power Data Acquisition, Audio Signal Buffering, Battery-Powered Measurement, Embedded Analog Control.

🧩

Portable Sensor Signal Conditioning

The MCP604T-I/ST fits portable sensor interfaces because its four channels can amplify, buffer, and filter several low-level signals while the typical operating current is only 230 uA. The 2.7 V minimum supply voltage supports compact, low-energy systems operating from a 3.3 V rail. Place each amplifier close to its sensor or connector, bypass the supply locally, and use short, guarded traces to limit noise pickup. The 2.8 MHz gain-bandwidth product provides useful bandwidth for common pressure, temperature, and resistive-sensor signals, although sensor-specific filtering and input-offset requirements still need verification.

🏭

Industrial Transducer Interface

The MCP604T-I/ST is appropriate for industrial transducer conditioning where a 2.7 V to 6 V supply, low typical operating current of 230 uA, and four independent amplifier channels simplify analog front ends. Its 2.8 MHz gain-bandwidth product can support general-purpose measurement paths with moderate bandwidth. Use one channel for a sensor signal, other channels for excitation, reference conditioning, or output buffering, and observe ESD protection requirements at external connectors. The industrial ordering code should be checked against the actual enclosure temperature and production qualification requirements.

📟

Low-Power Data Acquisition

The MCP604T-I/ST can condition four analog inputs before digitization in a compact data-acquisition system. Its 230 uA typical operating current limits the amplifier contribution to standby consumption, while the 2.8 MHz gain-bandwidth product is suitable for many sensor-bandwidth signals. Configure gain carefully so the closed-loop bandwidth remains appropriate for the signal, and account for input offset and bias-current error when using high-impedance sources. Local supply bypassing and short feedback paths are essential for repeatable measurements at low signal levels.

🎧

Audio Signal Buffering

The MCP604T-I/ST is useful for audio signal buffering and gain stages where rail-to-rail output operation helps preserve signal range in low-voltage systems. Its 2.8 MHz gain-bandwidth product covers a substantial portion of the audio band, and four channels allow paired stereo buffering plus additional monitoring or control paths. Confirm the required gain-bandwidth product, output-load conditions, distortion criteria, and noise performance for the selected gain and frequency. Keep input and output routing short and decouple the supply close to the device to reduce channel-to-channel interaction.

⚡

Battery-Powered Measurement

The MCP604T-I/ST is well suited to battery-powered measurement instruments because it starts at 2.7 V, consumes 230 uA typically, and integrates four amplifier channels. The device can condition battery voltage, sensor outputs, and status signals without requiring a large number of separate packages. Use the lowest supply voltage that still provides adequate output swing and common-mode headroom, and disable or bypass unneeded channels according to the family documentation. Battery-life estimates should include regulator quiescent current, ADC activity, and the load driven by each amplifier output.

🔧

Embedded Analog Control

The MCP604T-I/ST can provide four independent analog functions around an embedded controller, including sensor amplification, actuator feedback, reference buffering, and threshold conditioning. The 2.7 V to 6 V range is compatible with common embedded rails, while 230 uA typical current supports low-power operation. The package reduces routing complexity by grouping four channels in one 14-pin TSSOP footprint. Keep sensitive feedback and reference nets away from MCU clock and power-converter traces, and verify output drive against the connected ADC, DAC, or actuator input.

What is the MCP604T-I/ST?
The MCP604T-I/ST is a four-channel CMOS operational amplifier with a 2.8 MHz gain-bandwidth product, 230 uA typical operating current, and rail-to-rail output operation. According to the Microchip MCP604 product page, it uses advanced CMOS technology to provide low bias current, high open-loop gain, and high-speed operation. The quad configuration places four independent amplifiers in one 14-pin TSSOP package, reducing board area compared with separate single or dual amplifier packages.
What is the operating voltage range of MCP604T-I/ST?
The MCP604T-I/ST operates from 2.7 V to 6 V. This range supports 3.3 V and 5 V analog systems while allowing the same amplifier family to serve portable instruments and conventional industrial control circuits. The manufacturer identifies MCP604 as a 2.7 V quad operational amplifier. Confirm the output swing, input common-mode range, and electrical limits against the specific operating point in the manufacturer datasheet before finalizing the circuit.
Where can I download the MCP604T-I/ST datasheet PDF?
The official MCP604T-I/ST datasheet is available through the Microchip MCP604 product page at https://www.microchip.com/en-us/product/MCP604. Select the documentation tab to open or download the manufacturer PDF. Use the pin-description table, electrical-characteristics table, and recommended application circuit when assigning TSSOP pins, selecting bypass capacitors, and determining whether the amplifier fits the intended signal range.
Where can I find the MCP604T-I/ST pinout?
The MCP604T-I/ST pinout is shown in the MCP604 manufacturer datasheet and package documentation, with all 14 TSSOP pins identified by channel and configuration. Because the verified product listing does not reproduce every terminal name, use the official pin-description table when assigning inputs, outputs, supply pins, and unused amplifier channels. Preserve the manufacturer's numbering orientation and do not infer pin functions solely from the ordering-code suffix.
What are the key specifications of MCP604T-I/ST that engineers should know?
The MCP604T-I/ST combines four CMOS operational amplifiers, a 2.8 MHz gain-bandwidth product, and 230 uA typical operating current in a 14-pin TSSOP package. According to the Microchip MCP604 product page, it also offers low bias current, high open-loop gain, and rail-to-rail output swing. Its 2.7 V to 6 V supply range makes it suitable for low-voltage instrumentation, portable sensing, audio signal conditioning, and general-purpose analog buffering.
Is MCP604T-I/ST suitable for battery-powered applications?
Yes, the MCP604T-I/ST is suitable for many battery-powered signal-conditioning applications because its typical operating current is 230 uA and its minimum supply voltage is 2.7 V. The four-channel package can reduce both component count and board area. Actual battery life still depends on the supply voltage, load on each output, switching activity, and the quiescent current of the rest of the system, so evaluate the complete power budget rather than the amplifier value alone.
MCP604T-I/ST vs MCP604T-E/ST: which should I choose?
Choose MCP604T-I/ST for a design that specifically requires the industrial-temperature ordering configuration, and evaluate MCP604T-E/ST when its manufacturer temperature grade better matches the product's environmental requirements. Both are members of the MCP604 family and use the 14-pin TSSOP package identified by the ST suffix. Their electrical characteristics should be checked in the official family datasheet, especially operating temperature, offset limits, and grade-specific qualification information.
When should I choose MCP604T-I/ST over MCP604T-E/STVAO?
Choose MCP604T-I/ST when the design does not require the automotive qualification associated with the MCP604T-E/STVAO ordering option. The automotive-qualified ordering code can be appropriate when traceability, automotive qualification, or extended environmental requirements are mandated by the customer. For industrial, medical, or consumer products, the standard MCP604T-I/ST is generally the simpler choice when its specified electrical and temperature limits satisfy the design.
What is the best drop-in replacement for MCP604T-I/ST?
The closest drop-in replacement identified for the MCP604T-I/ST is the MCP604T-E/ST because both use the 14-pin TSSOP package and belong to the same MCP604 four-channel amplifier family. The principal selection difference is the ordering-code temperature grade, so verify operating-temperature limits before substitution. MCP604T-E/STVAO is another package-compatible family alternative for applications that specifically require its automotive ordering configuration.
Can MCP604T-E/ST replace MCP604T-I/ST?
Yes, MCP604T-E/ST can serve as a drop-in replacement when its electrical limits and temperature grade satisfy the target circuit. It retains the MCP604 family architecture, four amplifier channels, 2.8 MHz gain-bandwidth product, 230 uA typical operating current, and 14-pin TSSOP package. The replacement decision should also account for grade-specific temperature limits and any qualification requirements imposed by the end application.
What Microchip equivalent can replace MCP604T-I/ST?
MCP604T-E/ST is the direct Microchip family alternative for MCP604T-I/ST when a 14-pin TSSOP quad amplifier is required. It preserves the 2.8 MHz gain-bandwidth product and 230 uA typical operating current while changing the ordering temperature grade. MCP604T-E/STVAO provides another package-compatible option when automotive qualification is required. Confirm exact pin functions and worst-case electrical characteristics in the official family documentation.
Where can I buy MCP604T-I/ST online?
Use the Request a Quote form on this XAIPART product page to request MCP604T-I/ST availability, current lead time, and a quotation for the exact 14-pin TSSOP ordering code. Quote the full manufacturer part number MCP604T-I/ST when requesting supply. The form is the appropriate route for current commercial confirmation because inventory and commercial terms can change independently of the component's electrical design.
What is the price of MCP604T-I/ST?
Submit MCP604T-I/ST through the Request a Quote form on this page for the current unit price and volume pricing. Commercial pricing depends on order quantity, packaging, date, and supply status, so a static quotation should not be treated as permanent. Request the exact MPN and state the required order quantity and shipment destination so the returned quotation corresponds to the intended production quantity.
What is the lead time and stock status of MCP604T-I/ST?
Request the current MCP604T-I/ST stock position, lead time, minimum order quantity, and shipment schedule through the Request a Quote form on this page. The manufacturer product page identifies the MCP604 family, while component availability can change by package code and order volume. Include your required quantities and target delivery date in the request rather than relying on a generic family-level availability statement.
How should MCP604T-I/ST be bypassed and laid out?
Place the manufacturer-recommended supply bypass capacitor immediately between the supply and ground pins, and keep the loop as short as practical. Route each high-impedance input away from switching nodes and the amplifier output to reduce coupling. The 14-pin TSSOP package provides adequate pin density for four channels, but adjacent channels should still use straightforward, short routing so feedback-loop area and parasitic capacitance remain controlled.

के लिए इंजीनियरिंग संदर्भ डेटा MCP604T-I/ST — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।

चयन गाइड

Choose MCP604T-I/ST for a general industrial or embedded design requiring four low-power, rail-to-rail CMOS amplifiers in a 14-pin TSSOP package. Its 2.8 MHz gain-bandwidth product, 230 uA typical operating current, and 2.7 V to 6 V supply range are appropriate for portable sensing, audio buffering, and general analog conditioning. Choose MCP604T-E/ST when the E-grade ordering temperature classification better matches the product's environmental specification while retaining the same family architecture and footprint. Choose MCP604T-E/STVAO when automotive qualification is required by the customer or quality plan. MCP604T-I/SL can be evaluated when its ordering interpretation and supply packaging meet the assembly plan. Before approving any substitute, verify the exact pin functions, worst-case offset, common-mode range, output swing, temperature limits, and automotive qualification requirements in the manufacturer documentation.

विकल्पों के साथ तुलना

पैरामीटर यह उत्पाद MCP604T-E/ST MCP604T-E/STVAO MCP604T-I/SL
Package 14-TSSOP 14-TSSOP 14-TSSOP 14-TSSOP
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Number of Channels 4 channels 4 channels 4 channels 4 channels
Gain-Bandwidth Product 2.8 MHz 2.8 MHz 2.8 MHz 2.8 MHz
Typical Operating Current 230 uA 230 uA 230 uA 230 uA
Minimum Supply Voltage 2.7 V 2.7 V 2.7 V 2.7 V
Maximum Supply Voltage 6 V 6 V 6 V 6 V
Output Swing Rail-to-rail Rail-to-rail Rail-to-rail Rail-to-rail
Process Technology Advanced CMOS Advanced CMOS Advanced CMOS Advanced CMOS
Ordering Grade Industrial I grade E grade Automotive-oriented VAO ordering option Industrial I grade

मुख्य विशेषताएँ

  • Four independent amplifiers in one compact package (बनामMCP604T-E/ST)
  • Low operating current for four-channel analog conditioning (बनामMCP604T-E/STVAO)
  • Single-supply compatibility (बनामMCP604T-E/ST)

डिज़ाइन नोट्स

Place the supply bypass capacitor directly between the MCP604T-I/ST supply and ground pins, keeping the connection loop short and the return path close to the device. Route sensitive input and feedback traces away from digital clock lines, switching-regulator nodes, and the amplifier outputs. With four channels in a 14-pin TSSOP, plan the fanout so each amplifier's feedback components remain close to the associated input and output pins and do not force signals around the package.

Choose closed-loop gain with the 2.8 MHz gain-bandwidth product in mind. Higher gain reduces the usable closed-loop bandwidth, so a gain of 10 leaves substantially less bandwidth than unity gain. When driving a capacitive load, add an isolation resistor near the amplifier output and verify stability. For high-impedance sensors, account for input bias-current error and leakage by keeping the source impedance within the manufacturer-recommended range.

Do not interpret the 2.7 V minimum supply rating as permission to operate every output at either rail under every load. Check the input common-mode range, output-swing curve, capacitive-load behavior, and shutdown-channel configuration in the manufacturer datasheet. Likewise, avoid assuming that the four amplifier channels are interchangeable in every operating mode; identify unused inputs and outputs according to the official pin-description and application guidance.

The 230 uA value is a typical family operating-current specification, not a complete system-power limit. Actual current depends on supply voltage, amplifier activity, output load, and the selected operating mode. For battery designs, calculate the amplifier contribution at the intended duty cycle and include regulator, ADC, logic, and indicator currents. Use the most efficient operating configuration that still meets settling-time and noise requirements.

अनुपालन जानकारी

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
लीड फ्री
Unknown
हैलोजन फ्री
Unknown
कॉन्फ्लिक्ट मिनरल्स
Unknown

The standard MCP604T-I/ST is not identified as an automotive-qualified ordering option. The automotive-oriented MCP604T-E/STVAO alternative should be selected when automotive qualification is specifically required.

डेटा सत्यापन तिथि: 2026-11-20 — डेटा XAIPART की कंपोनेंट इंजीनियरिंग टीम द्वारा सत्यापित और क्यूरेट किया गया

संबंधित खोजें

MCP604T-I/ST datasheet MCP604T-I/ST pinout MCP604T-I/ST datasheet pdf MCP604T-I/ST equivalent MCP604T-I/ST replacement MCP604T-I/ST cross reference MCP604T-I/ST vs MCP604T-E/ST MCP604T-I/ST footprint MCP604T-I/ST application circuit MCP604T-I/ST price MCP604T-I/ST stock Microchip MCP604T-I/ST MCP604 14-TSSOP op amp MCP604 2.8MHz amplifier

संबंधित कंपोनेंट्स और शब्द

Microchip Technology MCP604T-I/ST MCP604T-E/ST MCP604T-E/STVAO MCP604T-I/SL MCP604 quad operational amplifier CMOS operational amplifier analog signal conditioner rail-to-rail output gain-bandwidth product typical operating current input bias current open-loop gain low-power amplifier 14-pin TSSOP TSSOP package family surface-mount package SMD industrial instrumentation portable sensor interface battery-powered measurement audio signal buffering embedded analog control
त्वरित क़ौतिल आदेश (RFQ)
पूर्ण विवरण भरें — हमारी सेल्स टीम 24 घंटे के भीतर जवाब देगी
पार्ट नंबर निर्माता पैकेज QTY लक्ष्य कीमत विस्तारित
✓
उद्धरण प्रस्तुत!

हम आपकी ईमेल पर 24 घंटे के भीतर जवाब देंगे

1
RFQ सबमिट किया गया
2
कोटेशन प्राप्त हुआ
3
ऑर्डर हो गया
4
भुगतान
5
शिप किया गया
6
डिलीवर किया गया
RFQ विवरण देखें