XA7A50T-2CSG325I - 52,160-Cell Automotive Artix-7 FPGA | AMD
MPN: XA7A50T-2CSG325I ✓ सक्रियXA7A50T-2CSG325I अवलोकन
A field-programmable gate array is a semiconductor device whose digital functionality is defined after fabrication through a configuration bitstream. Within the product hierarchy, an FPGA is a programmable logic device, while the Artix-7 family combines configurable logic blocks, programmable I/O, block RAM, DSP resources, and dedicated clock-management resources. This integration allows designers to implement parallel control, communication, signal processing, and interface functions on one device instead of combining multiple fixed-function components.
The XA series identifies the automotive-oriented Artix-7 offering. According to the manufacturer datasheet information, the XA7A50T-2CSG325I is AEC-Q100 qualified and supports 150 I/O, 52,160 logic cells, and 4,075 CLBs. Its 2,764,800 RAM bits provide distributed and block-storage resources, while the -2 speed designation identifies the device grade. The lead-free 324-ball package also supports the compact board layouts commonly required by automotive electronic control units.
Technically, the device is organized around programmable logic fabric and dedicated hard resources. Each configurable logic block supports general Boolean and sequential logic, while block RAM stores larger data buffers and DSP resources accelerate arithmetic-heavy operations. The listed 1,286 MHz value describes the device's maximum stated operating frequency; practical designs still depend on the selected clock, routing, logic depth, I/O standard, timing constraints, and implemented architecture. Configuration and programming are handled through the family's established FPGA tool flow.
Typical applications include automotive body and comfort controllers, motor and power-control electronics, industrial automation, camera and image-processing systems, communications infrastructure, and embedded test equipment. The 52,160-cell capacity is suitable for moderately complex control planes, while 150 I/O and dedicated memory allow simultaneous external interfaces and real-time data pipelines. The AEC-Q100 qualification makes the XA designation especially relevant where automotive reliability requirements drive component selection.
The main design consideration is that the 324-ball CSPBGA requires careful escape routing, multilayer PCB construction, controlled impedance, and a thermal strategy appropriate for the expected ambient and junction temperatures. Power sequencing, configuration control, bank deassertion, I/O standards, and unused-ball treatment should follow the manufacturer pinout and configuration guidance. A drop-in decision must also account for speed grade, temperature grade, qualification, and bitstream compatibility.
This page combines exact ordering information, package characteristics, automotive qualification, practical FPGA design guidance, and same-family drop-in candidates for engineering evaluation. It also distinguishes meaningful substitutions from changes that require a different package, pinout, qualification status, or device configuration.
के लिए ड्रॉप-इन विकल्प XA7A50T-2CSG325I — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।
इस सीरीज़ के वेरिएंट
समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं XA7A50T-2CSG325I (समान फॉर्म फैक्टर और फुटप्रिंट) — इसमें भिन्न Package, Operating Temperature, Logic Cells, Mounting Type, Speed Grade.
XC7A50T-2CSG325I
✅ ड्रॉप-इनकीमत के लिए संपर्क करें
डेटाशीट देखें →XA7A50T-1CSG325I
✅ ड्रॉप-इनकीमत के लिए संपर्क करें
डेटाशीट देखें →XA7A50T-1CSG325Q
✅ ड्रॉप-इनकीमत के लिए संपर्क करें
डेटाशीट देखें →XC7A50T-1CSG325I
✅ ड्रॉप-इन📋 संदर्भ विकल्प (कैटलॉग में नहीं)
XC7A50T-2CSG324I
✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित✗ स्टॉक में नहीं
$25.4545 / यूनिट
डेटाशीट देखें →XC7A50T-1CSG324I
✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापितकीमत के लिए संपर्क करें
डेटाशीट देखें →XA7A50T-2CSG325I Maximum Ratings और Electrical Characteristics
| Product Type | Automotive FPGA |
| FPGA Family | Artix-7 |
| Logic Cells | 52,160 cells |
| Configurable Logic Blocks | 4,075 CLBs |
| Maximum Stated Frequency | 1,286 MHz |
| RAM Capacity | 2,764,800 bits |
| User I/O Count | 150 I/O |
| Device Technology | CMOS |
| पैकेज | 324-ball CSPBGA |
| Package Dimensions | 15 mm x 15 mm |
| Ball Pitch | 0.80 mm |
| Speed Grade | -2 |
| Automotive Qualification | AEC-Q100 qualified |
| Lead-Free Status | Lead free |
| माउंटिंग प्रकार | Surface mount |
XA7A50T-2CSG325I 15 mm x 15 mm पिन कॉन्फ़िगरेशन गाइड
XA7A50T-2CSG325I (15 mm x 15 mm पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस डिजिटल IC में GPIO, संचार इंटरफ़ेस (UART, SPI, I2C) और पावर पिन शामिल हैं। वैकल्पिक पिन फ़ंक्शन और कॉन्फ़िगरेशन विकल्पों के लिए निर्माता डेटाशीट देखें। एम्बेडेड सिस्टम डिज़ाइन और PCB लेआउट के लिए आवश्यक।
इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: XA7A50T-2CSG325I.
देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।
सामान्य अनुप्रयोग
XA7A50T-2CSG325I के लिए उपयुक्त है 6 अनुप्रयोगs: Automotive Body Control, Industrial Automation Controller, Camera Image Processing, Motor and Power Control, Communications Gateway, Embedded Test and Measurement.
Automotive Body Control
The XA7A50T-2CSG325I fits centralized body-control and comfort modules because its 52,160 logic cells and 4,075 CLBs can implement multiple sequential control paths while 150 user I/O support switches, lamps, locks, sensors, and communication links. The AEC-Q100-qualified XA family provides the automotive qualification needed for demanding vehicle electronics. Engineers can implement debounce, diagnostic monitoring, PWM generation, and distributed logic in parallel, reducing the need for separate controllers. The -2 speed grade should be validated against the timing budget, and the 324-ball CSPBGA requires multilayer escape routing and a thermal design that accounts for ambient temperature and power density.
अनुशंसित
Industrial Automation Controller
The XA7A50T-2CSG325I is suitable for industrial automation when a controller must combine deterministic control logic with multiple external interfaces. Its 52,160 logic cells provide substantial parallel processing capacity, while 2,764,800 RAM bits support buffering, protocol translation, and data acquisition. The 150 I/O can accommodate digital field signals and industrial buses when suitable I/O standards and voltage levels are assigned. A practical implementation could place high-speed acquisition or packet processing in the FPGA and use an STM32-class microcontroller for supervisory control. The design must be constrained for the -2 grade, checked for timing closure, and thermally managed within the compact CSPBGA footprint.
अनुशंसित
Camera Image Processing
The XA7A50T-2CSG325I can support parallel image acquisition, preprocessing, and interface handling because its 4,075 CLBs and 2,764,800 RAM bits provide substantial configurable logic and storage resources. Parallel pixel pipelines are well suited to programmable-logic architectures, allowing designers to implement filtering, thresholding, line correction, or region-of-interest detection before forwarding data. Its 150 I/O provide more interface options than a small microcontroller-oriented FPGA for multi-bit sensor and memory interfaces. Performance depends on external transceiver characteristics, memory timing, and I/O placement. Engineers should use the manufacturer pinout files, enforce supported I/O standards, and complete signal-integrity and power-budget analysis before production release.
अनुशंसित
Motor and Power Control
The XA7A50T-2CSG325I can be used in motor-control and power-conversion subsystems where parallel logic must coordinate gate-drive sequences, fault detection, and supervisory control. Its 52,160 logic cells are sufficient for multiple control loops, while the 150 I/O allow sampling of multiple sensor and status signals. Dedicated DSP resources may accelerate arithmetic in suitable control architectures, although the implementation must be evaluated with the Vivado design flow. The automotive qualification makes the XA variant relevant to vehicle auxiliary and traction-support platforms, while the -2 grade must satisfy timing margins under worst-case conditions. Power-supply sequencing, isolated interfaces, fault-safe states, and thermal shutdown behavior are essential design requirements.
अनुशंसित
Communications Gateway
The XA7A50T-2CSG325I is well suited to communications gateways that need simultaneous protocol conversion, packet buffering, and data framing. Its 52,160 logic cells support parallel datapaths, and 2,764,800 RAM bits can hold line-rate packet data, descriptors, and buffers. The 150 I/O allow simultaneous use of multiple high-speed interfaces when their voltage standards and bank constraints permit. A gateway design can use the FPGA for deterministic data movement while an STM32 microcontroller handles management, firmware updates, and secure control-plane functions. Timing closure should be based on actual transceiver and memory interfaces rather than the listed maximum frequency. Clock jitter, I/O drive strength, PCB loss, and power sequencing also need dedicated validation.
अनुशंसित
Embedded Test and Measurement
The XA7A50T-2CSG325I can implement deterministic acquisition, pattern generation, timing measurement, and protocol analysis in compact test equipment. Its programmable logic fabric supports concurrent channels, while 2,764,800 RAM bits provide reusable capture and pattern buffers. The 150 I/O can connect to multiple instrument or device-under-test signals, subject to the selected I/O standards and speed-grade timing limits. A microcontroller can manage calibration, operator commands, and data transfer while the FPGA executes acquisition and analysis in real time. For production use, validate clock accuracy, input thresholds, output timing, thermal margins, and calibration drift across the intended temperature range. Configuration storage and recovery should also be designed for uninterrupted field operation.
अनुशंसित
अनुशंसित उत्पादों का सारांश
के लिए इंजीनियरिंग संदर्भ डेटा XA7A50T-2CSG325I — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।
चयन गाइड
विकल्पों के साथ तुलना
| पैरामीटर | यह उत्पाद | XC7A50T-2CSG325I | XA7A50T-1CSG325I | XA7A50T-1CSG325Q | XC7A50T-1CSG325I | XC7A50T-2CSG324I | XC7A50T-1CSG324I |
|---|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 324-ball CSPBGA, 15 mm x 15 mm, 0.80 mm pitch | 324-ball CSPBGA | 324-ball CSPBGA | 324-ball CSPBGA | 324-ball CSPBGA | 324-ball CSPBGA | 324-ball CSPBGA |
| FPGA Family | Artix-7 XA | Artix-7 XC | Artix-7 XA | Artix-7 XA | Artix-7 XC | Artix-7 XC | Artix-7 XC |
| Speed Grade | -2 | -2 | -1 | -1 | -1 | -2 | -1 |
मुख्य विशेषताएँ
- Automotive-qualified XA-family device (बनामXC7A50T-2CSG325I)
- Higher stated speed class than the -1 alternatives (बनामXA7A50T-1CSG325I)
- Complete logic and memory resource set (बनामXC7A50T-1CSG324I)
- 150 user I/O in a compact 15 mm square package (बनामXC7A50T-2CSG324I)
डिज़ाइन नोट्स
Design the 324-ball CSPBGA layout with short, symmetric escape routes and sufficient layer transitions for the 0.80 mm ball pitch. Use the AMD package pinout files as the authority for every ball, including power, ground, configuration, and unused balls. Preserve the manufacturer’s recommended footprint and account for solder-mask definition, pad geometry, assembly tolerances, and via-in-pad requirements before PCB release.
Develop the power and thermal design around the highest expected utilization and ambient temperature rather than the nominal FPGA activity level. Estimate total dissipation from the selected core, I/O, and auxiliary power domains, then compare the resulting junction-temperature estimate with the selected grade’s limits. Use the package thermal model and PCB copper assumptions in the calculation, and provide heat spreading or forced cooling where the estimate shows inadequate margin.
Separate the supply requirements for core, I/O, and auxiliary banks during power-tree design. Confirm the permitted voltage combinations, startup sequencing, ramp limits, and monitored supply ranges from the manufacturer datasheet before fixing component values. Decoupling must be placed directly at the relevant supply balls, while configuration rails and I/O banks should be checked for leakage, inrush, and load-switch behavior during startup.
Do not treat a shared package as proof that every ordering code is a drop-in replacement. Verify the speed grade, temperature suffix, automotive qualification, lifecycle status, configuration memory, and bitstream compatibility separately. In particular, moving from the XA7A50T-2CSG325I to a -1-grade candidate changes the timing class, and moving from XA to XC changes the qualification designation; both require an engineering review.
Assign I/O standards only after checking the supported voltage, drive strength, slew behavior, and bank constraints for each selected ball. Account for package escape loss and PCB stack-up in the simulation budget, especially for high-speed interfaces. Use source-synchronous and series-termination strategies where appropriate, maintain continuous return paths, and avoid aggressive via transitions directly beneath signal balls where the fabrication capability would create discontinuities.
अनुपालन जानकारी
The manufacturer information identifies the device as AEC-Q100 qualified and lead free. RoHS, REACH, halogen-free, and conflict-minerals status are not explicitly stated in the product information used for this page.