XA7A50T-1CSG325I - Automotive Artix-7 FPGA | AMD
MPN: XA7A50T-1CSG325I ✓ ActiveXA7A50T-1CSG325I Overview
An FPGA is a reprogrammable semiconductor containing configurable logic blocks, block RAM, programmable input/output resources, and dedicated processing resources. In the device hierarchy, the XA7A50T belongs to the Artix-7 FPGA family, combines with the XA automotive product line, and is ultimately classified as a programmable logic semiconductor. This positioning supports compact control, sensor aggregation, communication bridging, and video or image-processing functions without relying on a fixed application-specific ASIC.
Key device attributes include 52,160 logic elements, 4,075 available logic cells or configurable logic blocks, and 2,764,800 total RAM bits. The device provides 150 user I/O for parallel sensor, actuator, camera, control, and communications interfaces. Its 28 nm process technology and 324-CSPBGA package provide a balance of logic capacity, I/O availability, board density, and power-conscious performance for mid-range embedded systems.
The -1 suffix denotes the device speed grade, while the CSG325I ordering code identifies the 324-ball chip-scale BGA package and the industrial temperature designation. Because the device uses a large BGA footprint, its electrical and mechanical design depends on careful PCB stack-up, power delivery, via-in-pad construction, and BGA assembly requirements. The manufacturer package-pinout resources should be used when assigning every ball and power-plane connection.
Typical applications include automotive body and chassis control modules, sensor-fusion preprocessing, industrial vision front ends, CAN or Ethernet interface concentrators, motor-control prototyping, and compact communication gateways. The 150 I/O count is particularly useful when a design must connect multiple sensors, actuator drivers, high-speed interfaces, or parallel data sources while keeping the FPGA footprint compact.
The primary design trade-off is thermal and assembly complexity. A 324-CSPBGA device concentrates substantial I/O and logic in a small area, but it also demands dense power and ground distribution, careful via placement, and thermal-aware floorplanning. Validate the selected speed and temperature grades against the automotive qualification, EMC, and environmental requirements of the end system.
This page consolidates part-specific resource counts, package information, ordering-code details, drop-in alternatives, and practical PCB considerations to help engineers qualify the XA7A50T-1CSG325I for a new design without relying solely on generic Artix-7 guidance.
Drop-in alternatives for XA7A50T-1CSG325I — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.
Variants in this series
Same-series models that are drop-in compatible with XA7A50T-1CSG325I (same form factor and footprint) — differing in Package, Operating Temperature, Mounting Type, Speed Grade, Family.
XA7A50T-1CSG325Q
✅ Drop-InContact for price
View Datasheet →XC7A50T-1CSG325I
✅ Drop-In📋 Reference alternative (not in catalog)
XC7A50T-2CSG325I
✅ Drop-InContact for price
View Datasheet →XC7A50T-1CSG324I
✅ Drop-In ⚠️ Specs UnverifiedContact for price
View Datasheet →XA7A50T-1CSG324Q
✅ Drop-In ⚠️ Specs UnverifiedContact for price
View Datasheet →XA7A50T-1CSG325I Maximum Ratings & Electrical Characteristics
| Device Type | Artix-7 XA FPGA |
| Logic Cells | 52,160 |
| Total RAM Bits | 2,764,800 bits |
| Available LABs/CLBs | 4,075 |
| User I/O | 150 |
| Process Technology | 28 nm |
| Package | 324-CSPBGA |
| Mounting Type | Surface mount |
| Core Supply Voltage | 1 V |
| Grade | Automotive-grade |
| Temperature Grade | Industrial |
| Speed Grade | -1 |
| Programming Technology | 28 nm FPGA technology |
| Device Family | Artix-7 |
| Product Line | Artix-7 XA |
| Package Ball Count | 324 balls |
XA7A50T-1CSG325I 324 balls Pin Configuration Guide
Pin configuration for XA7A50T-1CSG325I (324 balls package). This digital IC includes GPIO, communication interfaces (UART, SPI, I2C), and power pins. Refer to the manufacturer datasheet for alternate pin functions and configuration options. Essential for embedded system design and PCB layout.
No detailed pinout data available for XA7A50T-1CSG325I.
Refer to the datasheet for full pin configuration.
Typical Applications
XA7A50T-1CSG325I is suitable for 6 applications: Automotive Sensor Fusion Preprocessing, Industrial Vision Front End, CAN and Ethernet Interface Concentrator, Motor Control and Chassis Electronics, Aerospace and Defense Instrumentation, Secure Network Appliance.
Automotive Sensor Fusion Preprocessing
The XA7A50T-1CSG325I fits automotive sensor preprocessing because its 52,160 logic cells and 2,764,800 RAM bits can normalize camera, radar, or lidar data before transmission to a higher-level processor. Its 150 user I/O provide parallel channels for sensor interfaces, digital status signals, and actuator feedback. The -I industrial-temperature ordering code and automotive XA positioning support harsh-environment designs, while the 28 nm Artix-7 architecture balances logic capacity against power consumption. Confirm qualification requirements for the complete vehicle program.
Recommended
Industrial Vision Front End
The XA7A50T-1CSG325I is suitable for an industrial vision front end that must capture, threshold, crop, or transform parallel image data before passing it to a processor. The 52,160 logic cells support parallel pipelines, while 2,764,800 RAM bits provide line buffers and frame-storage working space. Its 150 I/O allow simultaneous camera data, strobe, configuration, and communications links without requiring a larger package. The compact 324-CSPBGA also reduces board area, although dense via routing and careful thermal design are required.
Recommended
CAN and Ethernet Interface Concentrator
The XA7A50T-1CSG325I can implement multiple automotive communication gateways, protocol converters, and interface concentrators in one programmable device. Its 52,160 logic cells accommodate parallel lane arbitration, packet routing, and monitoring functions, while the 150 user I/O provide the pin budget for multiple bus interfaces and control signals. The 28 nm implementation offers a practical balance between performance, logic utilization, and power. Use AMD constraints and timing reports to validate each transceiver and clock domain.
Recommended
Motor Control and Chassis Electronics
The XA7A50T-1CSG325I fits motor-control and chassis electronic modules that combine PWM generation, encoder decoding, fault monitoring, and communications. Its 52,160 logic cells provide parallel control capacity, and 150 I/O allow numerous sensor inputs, gate-driver commands, and diagnostic outputs. The automotive XA family and industrial-temperature ordering code are appropriate for a harsh-environment platform, subject to program-specific qualification. Keep high-current switching paths on the PCB separate from sensitive FPGA supplies and ground returns.
Recommended
Aerospace and Defense Instrumentation
The XA7A50T-1CSG325I can serve as the programmable control core in compact instrumentation, data-acquisition, and telemetry modules where deterministic parallel logic is valuable. The 52,160 logic cells and 2,764,800 RAM bits support state machines, signal conditioning, and buffering, and the 150 I/O provide broad sensor and communication connectivity. Its 28 nm Artix-7 construction supports efficient mid-range performance without the size of a larger FPGA. Program-specific environmental, radiation, reliability, and qualification criteria must be evaluated independently.
Recommended
Secure Network Appliance
The XA7A50T-1CSG325I is appropriate for a compact secure gateway that performs packet parsing, encryption control, protocol translation, or traffic filtering in hardware. Its 52,160 logic cells and 2,764,800 RAM bits accommodate parallel packet-processing pipelines and buffer management, while 150 I/O support parallel Ethernet MAC interfaces, flash memory, status LEDs, and administrative signals. The 324-CSPBGA footprint helps limit board area, but high-speed routing requires controlled impedance, continuous return paths, and careful power-plane segmentation.
Recommended
Recommended Products Summary
Engineering reference data for XA7A50T-1CSG325I — comparison, design guidance, and compliance information.
Selection Guide
Comparison with Alternatives
| Parameter | This Product | XA7A50T-1CSG325Q | XC7A50T-1CSG325I | XC7A50T-2CSG325I | XC7A50T-1CSG324I | XA7A50T-1CSG324Q |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 324-CSPBGA | 324-CSPBGA | 324-CSPBGA | 324-CSPBGA | 324-CSPBGA | 324-CSPBGA |
| FPGA Family | Artix-7 XA | Artix-7 XA | Artix-7 | Artix-7 | Artix-7 | Artix-7 XA |
| Logic Cells | 52,160 | 52,160 | 52,160 | 52,160 | 52,160 | 52,160 |
| Total RAM Bits | 2,764,800 bits | 2,764,800 bits | 2,764,800 bits | 2,764,800 bits | 2,764,800 bits | 2,764,800 bits |
| User I/O | 150 | 150 | 150 | 150 | 150 | 150 |
| Process Technology | 28 nm | 28 nm | 28 nm | 28 nm | 28 nm | 28 nm |
| Speed Grade | -1 | -1 | -1 | -2, slower than target | -1 | -1 |
| Product Positioning | Automotive-grade Artix-7 XA | Automotive-grade Artix-7 XA | Standard Artix-7 | Standard Artix-7 | Standard Artix-7 | Automotive-grade Artix-7 XA |
Key Differentiators
- Automotive-oriented XA product line with the same 324-CSPBGA footprint as the standard Artix-7 device (vs XC7A50T-1CSG325I)
- Higher speed grade than the -2 alternative (vs XC7A50T-2CSG325I)
- Dense integration of logic, memory, and I/O in a single compact package (vs XC7A50T-1CSG324I)
Design Notes
Treat the 324-CSPBGA as a high-density assembly rather than a conventional peripheral package. Assign every ball from AMD's device-specific package file, place decoupling capacitance at each supply ball, and provide adjacent ground vias. Keep high-speed configuration, clock, and serial interfaces away from switching-power-node routing. Validate the complete stack-up, via geometry, and assembly process with the selected PCB and BGA assembly house.
Create separate power planes or tightly coupled distribution regions for each device supply identified in the AMD package documentation. Estimate current demand from the AMD power estimator for the target utilization, speed grade, temperature, and configured interfaces, then apply an engineering margin. Place bulk and high-frequency bypass capacitors where their placement rules permit, and verify the PDN with the selected Vin-decoupling network before high-speed operation.
The 324-CSPBGA concentrates high I/O and logic activity into a small area, so thermal performance depends strongly on the PCB stack-up and copper around the device. Estimate junction temperature from the device's modeled power and the board's effective thermal resistance, then check the result against the selected temperature grade. Use thermal vias and spreading copper where permitted, and avoid blocking airflow with enclosure or connector placement.
Do not treat the XA7A50T and XC7A50T ordering codes as automatically equivalent. Although the listed alternatives share the 324-CSPBGA footprint and -1 speed class, automotive qualification, temperature treatment, lifecycle status, and documentation may differ. Review the exact ordering-code table, supported Vivado device and bitstream identifiers, and program-specific approval requirements before releasing a substitution to production.
Compliance Information
The part is identified as an automotive-grade Artix-7 XA device. RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not stated in the source records.