AMD

XC9572XL-7PC44I - 72-Macro-Cell 3.3V CPLD | AMD Xilinx

MPN: XC9572XL-7PC44I ✗ जीवन की समाप्ति
3.3 V Vdss 44-terminal square PLCC, QCCJ package code Package FLASH Memory
न्यूनतम ऑर्डर मात्रा: 1 |

XC9572XL-7PC44I अवलोकन

AMD Xilinx XC9572XL-7PC44I is a 3.3 V, 72-macro-cell complex programmable logic device with a 7.5 ns performance grade, supplied in a 44-terminal square PLCC package. It combines non-volatile configuration storage, in-system programmability, boundary-scan support, hot-plugging capability, and 3.3 V operation for compact control, glue-logic, and interface designs. The device is identified by the industrial temperature grade and the PC44 package designation.

A complex programmable logic device, or CPLD, is a programmable semiconductor positioned between simple fixed-function logic and FPGA resources. Its macrocell architecture provides product-term Boolean logic, registers, and programmable interconnect for implementing control logic, state machines, bus arbitration, protocol conversion, and peripheral interfaces. The XC9572XL belongs to the broader hierarchy of programmable logic devices, which includes simple PLDs, CPLDs, and FPGAs.

Key characteristics include 72 macro cells, 44 package terminals, a 3.3 V supply, and a 7.5 ns speed grade. Individual output-enable control, local output inversion, input hysteresis, bus-hold capability, and per-pin input features improve implementation flexibility. Flash-based configuration preserves the implemented logic when power is removed, avoiding separate programming after every power cycle.

The device supports a mixture of combinational and registered logic in one package, making it useful for designs that need more deterministic control than a basic PAL or GAL while avoiding the resource scale and complexity of larger FPGAs. Its PLCC package provides 44 physical terminals for board-level assembly, and the family documentation describes in-system programming and boundary-scan-compatible operation.

Typical uses include industrial controller logic, data-acquisition interfaces, legacy peripheral emulation, automated-test equipment, sensor conditioning, motor-control sequencing, and communication bridge logic. The 72-macro-cell capacity is particularly appropriate for multiple state machines, bus controls, and protocol interfaces that must retain their configuration during power interruptions.

Designers should preserve the device's required power, programming, and configuration behavior exactly as described in the manufacturer data sheet. PCB allocation must follow the 44-terminal PLCC footprint and its pin designations, while software, design-entry, programming-cable, and in-system-programming choices must be checked against the legacy XC9500XL tool flow before schematic capture begins.

This product page consolidates the verified manufacturer specifications, package details, programming references, lifecycle position, and available drop-in family alternatives. It also provides practical selection and replacement guidance that helps engineers distinguish speed-grade, temperature-grade, and package differences before approving a substitution.

के लिए ड्रॉप-इन विकल्प XC9572XL-7PC44I — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।

इस सीरीज़ के वेरिएंट

समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं XC9572XL-7PC44I (समान फॉर्म फैक्टर और फुटप्रिंट) — इसमें भिन्न Package Type.

XC9572XL-7PCG44I

✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित
AMD
📦 44-terminal QCCJ PLCC
Complex programmable logic device (CPLD) · XC9500XL · XC9572XL · 7 ns · 34 I/O · 44 terminals · 44-LCC, J-lead, surface mount · 16.59 mm x 16.59 mm

कीमत के लिए संपर्क करें

डेटाशीट देखें →

XC9572XL-7PC44C

✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित
📦 44-terminal QCCJ PLCC
Same 72-macro-cell, 3.3 V, 7.5 ns class and 44-terminal package; commercial versus industrial temperature designation differs.

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

XC9572XL-10PC44I

✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित
📦 44-terminal QCCJ PLCC
Same 72-macro-cell, 3.3 V and 44-terminal package, but the 10 ns grade is 33% slower than the 7.5 ns target grade.

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

XC9572XL-10PCG44C

✅ ड्रॉप-इन
📦 44-terminal QCCJ PLCC
Same 72-macro-cell, 3.3 V and 44-terminal package; 10 ns grade is 33% slower and the temperature designation differs.

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

XC9572XL-10PCG44I

✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित
📦 44-terminal QCCJ PLCC
Same 72-macro-cell, 3.3 V, industrial class and 44-terminal package; the 10 ns grade is 33% slower than 7.5 ns.

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

XC9572XL-7PC44I Maximum Ratings और Electrical Characteristics

Device Type Complex Programmable Logic Device (CPLD)
Product Family XC9572XL
Logic Capacity 72 macro cells
सप्लाई वोल्टेज 3.3 V
Performance Grade 7.5 ns
Package Type 44-terminal square PLCC, QCCJ package code
Number of Terminals 44
माउंटिंग प्रकार Surface mount
Temperature Grade Industrial
Configuration Memory FLASH
In-System Programming Supported
Hot-Plug Capability Supported
Individual Output Enable Supported for each output pin
Local Output Inversion Supported
Input Hysteresis Present on user and boundary-scan inputs
Bus-Hold Circuitry Present on user pin inputs
Boundary Scan Supported

XC9572XL-7PC44I 44-terminal square plcc, qccj package code पिन कॉन्फ़िगरेशन गाइड

XC9572XL-7PC44I (44-terminal square plcc, qccj package code पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस डिजिटल IC में GPIO, संचार इंटरफ़ेस (UART, SPI, I2C) और पावर पिन शामिल हैं। वैकल्पिक पिन फ़ंक्शन और कॉन्फ़िगरेशन विकल्पों के लिए निर्माता डेटाशीट देखें। एम्बेडेड सिस्टम डिज़ाइन और PCB लेआउट के लिए आवश्यक।

XC9572XL-7PC44I के लिए 44-terminal square plcc, qccj package code पैकेज पिनआउट आरेख

इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: XC9572XL-7PC44I.

देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।

सामान्य अनुप्रयोग

XC9572XL-7PC44I के लिए उपयुक्त है 6 अनुप्रयोगs: Industrial Controller Glue Logic, Data-Acquisition Interface Control, Legacy Peripheral Emulation, Automated Test Equipment Control, Motor and Motion Sequencing, Sensor and Alarm Interface.

🏭

Industrial Controller Glue Logic

The XC9572XL-7PC44I is well suited to consolidating several control functions into one 72-macro-cell CPLD while retaining its implementation in Flash configuration memory. Its 7.5 ns performance grade provides additional timing margin for combinational control paths, registered state machines, interlocks, and alarm sequencing compared with the 10 ns family variants. The 44-terminal PLCC package also gives designers access to a substantial number of user I/Os for connecting discrete sensors, actuators, status indicators, and inter-module handshake signals. Industrial suitability must be confirmed against the operating-temperature and electrical limits in DS057.

📡

Data-Acquisition Interface Control

A 72-macro-cell XC9572XL-7PC44I can implement acquisition sequencing, sample counters, channel multiplexing, trigger routing, and buffer-control logic around external converters or sensors. The 3.3 V operating class integrates with modern low-voltage digital interfaces, while individual output enable and local inversion support flexible routing and bus control. The 7.5 ns grade is useful when control latency must be minimized, although signal integrity and input timing must still be evaluated for the selected external devices. In-system programming permits configuration updates without removing the CPLD from the assembled board.

🔧

Legacy Peripheral Emulation

The XC9572XL-7PC44I can bridge or emulate older bus interfaces by implementing deterministic state machines, interrupt logic, address decoding, and data-path control in a single programmable device. Its 72 macro cells provide more logic density than a simple GAL while keeping the design centered on the established XC9500XL architecture. The 44-terminal package supports enough connections for bidirectional buffers, control signals, and shared-bus transceivers. Because a CPLD substitution can alter pin behavior even within one family, engineers should compare terminal functions, timing constraints, and pin-direction behavior directly against the original design.

🖥️

Automated Test Equipment Control

In automated test equipment, the XC9572XL-7PC44I can implement pattern sequencing, instrument enables, timing gates, binning logic, and interlock functions with predictable Flash-retention behavior. Its 72 macro cells are suitable for parallel control tasks, while the 7.5 ns grade helps minimize combinational control delay. Individual output enable supports shared resources that must be isolated during tests. The industrial grade designation is relevant to factory environments, but the finished equipment must still meet its own safety, isolation, reliability, and calibration requirements. Use the official package drawing when planning the 44-terminal assembly footprint.

⚡

Motor and Motion Sequencing

The XC9572XL-7PC44I can coordinate stepper or brushless-motor sequencing, direction decoding, limit-switch handling, fault latching, and digital drive-enable signals. Its 72 macro cells allow multiple coordinated state machines to coexist without moving to a larger FPGA, and the 3.3 V interface matches common controller logic. The 7.5 ns grade provides useful margin for command decoding, but motor-driver timing, isolation, protection, and grounding must be designed separately. Hot-plug support should not be interpreted as permission to energize a motor during partial board insertion; system-level power sequencing must prevent unsafe intermediate states.

🧩

Sensor and Alarm Interface

The XC9572XL-7PC44I can consolidate sensor thresholds represented as logic signals, debounce state machines, alarm priorities, event counters, and communication handshakes. Its 72 macro cells provide capacity for several independent channels, while input hysteresis and bus-hold circuitry help preserve logic states on inactive or tri-stated inputs. The 3.3 V operation suits modern sensor and processor interfaces, and the 7.5 ns grade minimizes logic delay in decision paths. Actual analog thresholds, electrical noise immunity, and fail-safe behavior remain system-level concerns and must not be delegated to the programmable logic device.

अनुशंसित उत्पादों का सारांश

XC9572XL-7PCG44I AMD उपयोग में: Industrial Controller Glue Logic, Data-Acquisition Interface Control, Legacy Peripheral Emulation, Automated Test Equipment Control, Motor and Motion Sequencing, Sensor and Alarm Interface XC9572XL-10PCG44C Lower-speed XC9572XL family alternative उपयोग में: Industrial Controller Glue Logic, Automated Test Equipment Control XC9572XL-10PC44I Same-family lower-speed configuration option उपयोग में: Data-Acquisition Interface Control, Motor and Motion Sequencing XC9572XL-7PC44C Same-speed family alternative with different temperature designation उपयोग में: Legacy Peripheral Emulation XC9572XL-10PCG44I Same-family industrial alternative उपयोग में: Sensor and Alarm Interface
What is the AMD Xilinx XC9572XL-7PC44I?
The AMD Xilinx XC9572XL-7PC44I is a 3.3 V, 72-macro-cell complex programmable logic device with a 7.5 ns performance grade in a 44-terminal square PLCC package. According to the manufacturer data sheet DS057, it uses Flash configuration memory and supports in-system programming, boundary scan, hot plugging, individual output enable, local inversion, input hysteresis, and bus-hold circuitry. It is intended for compact control logic and interface designs that must retain their configuration after power is removed.
Where can I download the XC9572XL datasheet PDF?
The official XC9572XL manufacturer data sheet is available from AMD at https://docs.amd.com/v/u/en-US/ds057. The document identifies itself as DS057, titled XC9572XL High-Performance CPLD Data Sheet. Use its package drawings, pin descriptions, electrical characteristics, and configuration information when laying out the 44-terminal PLCC footprint. The document is dated March 21, 2006 with revision 1.9, so verify any legacy software or programming guidance against the complete data sheet.
Where can I find the XC9572XL pinout?
The XC9572XL pinout is published in the manufacturer data sheet DS057 together with the PLCC package drawings and pin-description tables. The XC9572XL-7PC44I uses the QCCJ 44-terminal package code, so do not copy the pin arrangement from a different 44-pin package variant without checking the package drawing. Use the official pin table to assign supply, ground, configuration, clock, input, output, and control functions before finalizing PCB tracks.
How do I program the XC9572XL-7PC44I?
Program the XC9572XL-7PC44I through a compatible Xilinx ISE design and programming flow using an IEEE 1149.1 boundary-scan interface and the manufacturer's specified device programming cable. The device stores its configuration in Flash and supports in-system programming, so the programmed design remains available after power cycles. Confirm the exact pin assignments, bus-width settings, JTAG clock mode, and programmer behavior against DS057 and the applicable ISE device-support documentation.
What is the difference between XC9572XL-7PC44I and XC9572XL-7PCG44I?
The XC9572XL-7PC44I and XC9572XL-7PCG44I are closely related 72-macro-cell XC9500XL devices in the same 44-terminal package family, with both carrying the 7.5 ns performance designation. Their documented differentiation concerns the package or ordering suffix rather than a change in logic capacity. Verify the exact lead geometry, terminal numbering, temperature grade, and ordering code in AMD DS057 before treating either part as a direct substitute.
When should I choose the XC9572XL-7PC44I instead of the 10-speed-grade variants?
Choose the XC9572XL-7PC44I when the design requires the 7.5 ns performance grade rather than the 10 ns grade of XC9572XL-10PCG44C and related variants. The faster grade can provide more timing margin in paths that do not meet timing at 10 ns. Conversely, a 10 ns device may be preferable when the slower grade satisfies the design and legacy supply or lifecycle requirements dominate.
Is the XC9572XL-7PC44I suitable for industrial control logic?
The XC9572XL-7PC44I is identified with an industrial temperature grade and provides 72 macro cells, Flash configuration retention, in-system programming, and hot-plug support. These features suit industrial controllers, data-acquisition interfaces, and equipment-control logic where deterministic state-machine behavior is needed. The exact operating-temperature limits and electrical limits must be checked in DS057 for the final system environment.
What is the best drop-in replacement for XC9572XL-7PC44I?
The closest drop-in choices are XC9572XL-7PCG44I and other XC9572XL variants that retain the 72-macro-cell device, 3.3 V operation, 44-terminal package, and compatible lead arrangement. Selection must account for the suffix changes, speed grade, temperature grade, and any ordering-code distinctions. XC9572XL-10PCG44C is a lower-speed family alternative, while larger or differently packaged devices should not be treated as drop-in replacements.
Can I replace XC9572XL-7PC44I with XC9572XL-10PCG44C?
XC9572XL-10PCG44C can be considered as a same-family replacement when its 10 ns timing grade satisfies the design and its 44-terminal package matches the target footprint. The device retains the XC9572XL identity and 72-macro-cell logic capacity, but its 10 ns grade is slower than the target's 7.5 ns grade. Confirm pin compatibility, temperature rating, package dimensions, configuration file support, and timing closure before approving the substitution.
What can replace XC9572XL-7PC44I in a legacy design?
The most credible replacement is another 44-terminal XC9572XL ordering code with the same macro-cell count, 3.3 V interface, and compatible programming arrangement. XC9572XL-7PCG44I, XC9572XL-7PC44C, XC9572XL-10PC44I, and XC9572XL-10PCG44C are the relevant family comparisons, subject to suffix, speed, and temperature checks. Cross-brand CPLDs may require different pin assignments, architecture conversions, logic recompilation, and programmer changes, so they are not necessarily board-level drop-ins.
Is there an AMD Xilinx equivalent for XC9572XL-7PC44I?
AMD Xilinx provides the closest family alternatives under the XC9572XL designation, including XC9572XL-7PCG44I and the 10 ns PC44 variants. These parts preserve the 72-macro-cell CPLD architecture and 3.3 V operating class while using related 44-terminal ordering codes. A same-brand alternative is preferable when preserving the original tool flow, architecture, package, and programming setup is essential.
Where can I buy XC9572XL-7PC44I and what is its price?
Use the Request a Quote form on this page to request current availability, commercial terms, and unit pricing for the exact XC9572XL-7PC44I ordering code. Because this CPLD is an obsolete legacy device, stock can vary by lot and traceability requirements should be confirmed before approval. Specify the QCCJ package, industrial temperature grade, 7.5 ns performance grade, and required quantity in the request.
Is XC9572XL-7PC44I currently in stock?
Current stock for an obsolete programmable device can change independently of the original manufacturer lifecycle status. Submit a Request a Quote with the exact MPN XC9572XL-7PC44I to receive an availability response and lead-time confirmation. For legacy production or repair, also request date-code information, traceability records, and confirmation that the component has not been programmed, modified, or otherwise altered.
What is the lead time for XC9572XL-7PC44I?
The current lead time for XC9572XL-7PC44I must be confirmed through the Request a Quote form on this page. Lead time for an obsolete CPLD depends on remaining factory stock, authorized-channel inventory, programming status, lot traceability, and whether multiple units must share a consistent date code. Provide the required quantity and production schedule so the supplier can confirm the most accurate commitment.
What are the key specifications engineers should know about XC9572XL-7PC44I?
The XC9572XL-7PC44I combines 72 macro cells, 3.3 V operation, a 7.5 ns performance grade, and a 44-terminal QCCJ surface-mount package. AMD data sheet DS057 also identifies Flash configuration, in-system programming, hot-plug support, boundary scan, individual output enable, local inversion, input hysteresis, and bus-hold inputs. Its obsolete lifecycle status means sourcing, software support, and long-term supply planning require explicit review.
What is the footprint for XC9572XL-7PC44I?
The XC9572XL-7PC44I uses a 44-terminal square PLCC footprint with package code QCCJ and J-bend terminals. Use the dimensional drawing and terminal numbering in the manufacturer data sheet DS057 for land patterns, courtyard boundaries, and assembly drawings. Do not infer the footprint from another square package with 44 terminals because lead pitch, body dimensions, terminal numbering, and exposed-pad arrangements can differ.

के लिए इंजीनियरिंग संदर्भ डेटा XC9572XL-7PC44I — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।

चयन गाइड

Choose the XC9572XL-7PC44I when maintaining the original 7.5 ns, industrial-grade, 72-macro-cell implementation is important and the legacy Xilinx tool flow must remain intact. Select XC9572XL-7PCG44I as the closest same-performance ordering alternative after checking the package suffix and terminal details. Use XC9572XL-7PC44C only when commercial temperature requirements are acceptable and its ordering attributes match the system. The 10 ns variants, including XC9572XL-10PCG44C and XC9572XL-10PC44I, are reasonable same-family choices only after timing closure confirms that the slower grade meets every path requirement. Because this CPLD is obsolete, selection should also consider long-term availability, traceability, programming-tool continuity, and whether maintaining the legacy design is more economical than migrating the logic to a current programmable device.

विकल्पों के साथ तुलना

पैरामीटर यह उत्पाद XC9572XL-7PCG44I XC9572XL-7PC44C XC9572XL-10PC44I XC9572XL-10PCG44C XC9572XL-10PCG44I
Brand AMD Xilinx AMD Xilinx AMD Xilinx AMD Xilinx AMD Xilinx AMD Xilinx
Package 44-terminal QCCJ PLCC 44-terminal QCCJ PLCC 44-terminal QCCJ PLCC 44-terminal QCCJ PLCC 44-terminal QCCJ PLCC 44-terminal QCCJ PLCC
Logic Capacity 72 macro cells 72 macro cells 72 macro cells 72 macro cells 72 macro cells 72 macro cells
Supply Voltage 3.3 V 3.3 V 3.3 V 3.3 V 3.3 V 3.3 V
Performance Grade 7.5 ns 7.5 ns 7.5 ns 10 ns 10 ns 10 ns
Temperature Grade Industrial Industrial Commercial Industrial Commercial Industrial
Configuration Memory FLASH FLASH FLASH FLASH FLASH FLASH
In-System Programming Supported Supported Supported Supported Supported Supported
Hot-Plug Capability Supported Supported Supported Supported Supported Supported

मुख्य विशेषताएँ

  • Faster timing grade within the same XC9572XL family (बनामXC9572XL-10PCG44C)
  • Industrial-grade selection for factory and equipment environments (बनामXC9572XL-7PC44C)
  • Retains 72 macro cells without moving to a larger architecture (बनामXC9572XL-10PC44I)
  • Direct ordering continuity for existing XC9572XL designs (बनामXC9572XL-7PCG44I)

डिज़ाइन नोट्स

Allocate the PCB land pattern from the QCCJ mechanical drawing and terminal table in AMD DS057, not from a generic 44-pin PLCC library. Confirm body size, lead pitch, lead span, pin-1 orientation, courtyard clearance, and solderable-versus-unsolderable lead assignments before releasing the layout. The exact terminal functions must also be checked for each ordering code because a compatible package does not guarantee identical configuration or control-pin assignments.

Design the 3.3 V supply path so the CPLD receives the required operating voltage and sequencing margin under every programmed state. Follow the decoupling and pin-power requirements in DS057, including the value and placement of local supply capacitors. Keep high-current return paths away from sensitive configuration and programming nets, and inspect the assembled board for shorts between adjacent QCCJ terminals. Hot-plug support is a device capability, not a substitute for system-level power-state protection.

Do not treat the G, C, and I suffixes as cosmetic reel or stock codes. Within XC9572XL ordering codes, they can correspond to package construction, operating-temperature grade, or other qualification attributes. Build a substitution comparison that checks the package drawing, temperature grade, speed grade, terminal functions, configuration architecture, and programmed-device status. A same-family replacement may require a different bitstream even when the PCB land pattern remains compatible.

Use the DS057 input and output timing characteristics to constrain external clock, configuration, boundary-scan, and user-interface paths. Account for board capacitance, pull-up or pull-down values, external driver direction, and the 7.5 ns internal performance grade when defining constraints. Bus-hold, input hysteresis, and individual output enable simplify some interfaces but do not eliminate contention, ringing, or setup-and-hold risks at the board level.

अनुपालन जानकारी

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
लीड फ्री
Unknown
हैलोजन फ्री
Unknown
कॉन्फ्लिक्ट मिनरल्स
Unknown

The component is an industrial-grade programmable logic device, not an automotive AEC-Q100-qualified product. Compliance declarations for this exact ordering code must be confirmed with the manufacturer or an authorized documentation source.

डेटा सत्यापन तिथि: 2026-11-16 — डेटा XAIPART की कंपोनेंट इंजीनियरिंग टीम द्वारा सत्यापित और क्यूरेट किया गया

संबंधित खोजें

xc9572xl datasheet xc9572xl pinout xc9572xl programming xc9572xl 10vqg44c xc9572xl 10vqg44i xc9572xl 10vqg64c xc9572xl 7vqg64i XC9572XL-7PC44I datasheet XC9572XL-7PC44I pinout XC9572XL-7PC44I programming XC9572XL-7PC44I equivalent XC9572XL-7PC44I replacement XC9572XL-7PC44I footprint AMD Xilinx XC9572XL-7PC44I XC9572XL-7PC44I price

संबंधित कंपोनेंट्स और शब्द

AMD Xilinx XC9572XL-7PC44I XC9572XL-7PCG44I XC9572XL-7PC44C XC9572XL-10PC44I XC9572XL-10PCG44C XC9572XL-10PCG44I CPLD complex programmable logic device programmable logic device FPGA PAL GAL Flash configuration memory in-system programming IEEE 1149.1 boundary scan macro cell 7.5 ns performance grade 3.3 V supply voltage 72 macro cells QCCJ 44-terminal PLCC surface mount industrial temperature grade
त्वरित क़ौतिल आदेश (RFQ)
पूर्ण विवरण भरें — हमारी सेल्स टीम 24 घंटे के भीतर जवाब देगी
पार्ट नंबर निर्माता पैकेज QTY लक्ष्य कीमत विस्तारित
✓
उद्धरण प्रस्तुत!

हम आपकी ईमेल पर 24 घंटे के भीतर जवाब देंगे

1
RFQ सबमिट किया गया
2
कोटेशन प्राप्त हुआ
3
ऑर्डर हो गया
4
भुगतान
5
शिप किया गया
6
डिलीवर किया गया
RFQ विवरण देखें