XC9572XL-7PC44I - 72-Macro-Cell 3.3V CPLD | AMD Xilinx
部品番号: XC9572XL-7PC44I ✗ 生産終了XC9572XL-7PC44I 概要
A complex programmable logic device, or CPLD, is a programmable semiconductor positioned between simple fixed-function logic and FPGA resources. Its macrocell architecture provides product-term Boolean logic, registers, and programmable interconnect for implementing control logic, state machines, bus arbitration, protocol conversion, and peripheral interfaces. The XC9572XL belongs to the broader hierarchy of programmable logic devices, which includes simple PLDs, CPLDs, and FPGAs.
Key characteristics include 72 macro cells, 44 package terminals, a 3.3 V supply, and a 7.5 ns speed grade. Individual output-enable control, local output inversion, input hysteresis, bus-hold capability, and per-pin input features improve implementation flexibility. Flash-based configuration preserves the implemented logic when power is removed, avoiding separate programming after every power cycle.
The device supports a mixture of combinational and registered logic in one package, making it useful for designs that need more deterministic control than a basic PAL or GAL while avoiding the resource scale and complexity of larger FPGAs. Its PLCC package provides 44 physical terminals for board-level assembly, and the family documentation describes in-system programming and boundary-scan-compatible operation.
Typical uses include industrial controller logic, data-acquisition interfaces, legacy peripheral emulation, automated-test equipment, sensor conditioning, motor-control sequencing, and communication bridge logic. The 72-macro-cell capacity is particularly appropriate for multiple state machines, bus controls, and protocol interfaces that must retain their configuration during power interruptions.
Designers should preserve the device's required power, programming, and configuration behavior exactly as described in the manufacturer data sheet. PCB allocation must follow the 44-terminal PLCC footprint and its pin designations, while software, design-entry, programming-cable, and in-system-programming choices must be checked against the legacy XC9500XL tool flow before schematic capture begins.
This product page consolidates the verified manufacturer specifications, package details, programming references, lifecycle position, and available drop-in family alternatives. It also provides practical selection and replacement guidance that helps engineers distinguish speed-grade, temperature-grade, and package differences before approving a substitution.
ドロップイン代替品: XC9572XL-7PC44I — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: XC9572XL-7PC44I (同一形状・フットプリント) — 相違点: Package Type.
XC9572XL-7PCG44I
✅ ドロップイン ⚠️ 仕様未検証価格はお問い合わせください
データシートを見る →XC9572XL-7PC44C
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
XC9572XL-10PC44I
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
XC9572XL-10PCG44C
✅ ドロップイン📋 参考代替品(カタログ未掲載)
XC9572XL-10PCG44I
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
XC9572XL-7PC44I 最大定格&電気的特性
| Device Type | Complex Programmable Logic Device (CPLD) |
| Product Family | XC9572XL |
| Logic Capacity | 72 macro cells |
| 電源電圧 | 3.3 V |
| Performance Grade | 7.5 ns |
| Package Type | 44-terminal square PLCC, QCCJ package code |
| Number of Terminals | 44 |
| 実装タイプ | Surface mount |
| Temperature Grade | Industrial |
| Configuration Memory | FLASH |
| In-System Programming | Supported |
| Hot-Plug Capability | Supported |
| Individual Output Enable | Supported for each output pin |
| Local Output Inversion | Supported |
| Input Hysteresis | Present on user and boundary-scan inputs |
| Bus-Hold Circuitry | Present on user pin inputs |
| Boundary Scan | Supported |
XC9572XL-7PC44I 44-terminal square plcc, qccj package code ピン配置ガイド
XC9572XL-7PC44I (44-terminal square plcc, qccj package code パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: XC9572XL-7PC44I.
詳細は データシート をご参照ください。
主な用途
XC9572XL-7PC44I の用途: 6 件s: Industrial Controller Glue Logic, Data-Acquisition Interface Control, Legacy Peripheral Emulation, Automated Test Equipment Control, Motor and Motion Sequencing, Sensor and Alarm Interface.
Industrial Controller Glue Logic
The XC9572XL-7PC44I is well suited to consolidating several control functions into one 72-macro-cell CPLD while retaining its implementation in Flash configuration memory. Its 7.5 ns performance grade provides additional timing margin for combinational control paths, registered state machines, interlocks, and alarm sequencing compared with the 10 ns family variants. The 44-terminal PLCC package also gives designers access to a substantial number of user I/Os for connecting discrete sensors, actuators, status indicators, and inter-module handshake signals. Industrial suitability must be confirmed against the operating-temperature and electrical limits in DS057.
おすすめ
Data-Acquisition Interface Control
A 72-macro-cell XC9572XL-7PC44I can implement acquisition sequencing, sample counters, channel multiplexing, trigger routing, and buffer-control logic around external converters or sensors. The 3.3 V operating class integrates with modern low-voltage digital interfaces, while individual output enable and local inversion support flexible routing and bus control. The 7.5 ns grade is useful when control latency must be minimized, although signal integrity and input timing must still be evaluated for the selected external devices. In-system programming permits configuration updates without removing the CPLD from the assembled board.
おすすめ
Legacy Peripheral Emulation
The XC9572XL-7PC44I can bridge or emulate older bus interfaces by implementing deterministic state machines, interrupt logic, address decoding, and data-path control in a single programmable device. Its 72 macro cells provide more logic density than a simple GAL while keeping the design centered on the established XC9500XL architecture. The 44-terminal package supports enough connections for bidirectional buffers, control signals, and shared-bus transceivers. Because a CPLD substitution can alter pin behavior even within one family, engineers should compare terminal functions, timing constraints, and pin-direction behavior directly against the original design.
おすすめ
Automated Test Equipment Control
In automated test equipment, the XC9572XL-7PC44I can implement pattern sequencing, instrument enables, timing gates, binning logic, and interlock functions with predictable Flash-retention behavior. Its 72 macro cells are suitable for parallel control tasks, while the 7.5 ns grade helps minimize combinational control delay. Individual output enable supports shared resources that must be isolated during tests. The industrial grade designation is relevant to factory environments, but the finished equipment must still meet its own safety, isolation, reliability, and calibration requirements. Use the official package drawing when planning the 44-terminal assembly footprint.
おすすめ
Motor and Motion Sequencing
The XC9572XL-7PC44I can coordinate stepper or brushless-motor sequencing, direction decoding, limit-switch handling, fault latching, and digital drive-enable signals. Its 72 macro cells allow multiple coordinated state machines to coexist without moving to a larger FPGA, and the 3.3 V interface matches common controller logic. The 7.5 ns grade provides useful margin for command decoding, but motor-driver timing, isolation, protection, and grounding must be designed separately. Hot-plug support should not be interpreted as permission to energize a motor during partial board insertion; system-level power sequencing must prevent unsafe intermediate states.
おすすめ
Sensor and Alarm Interface
The XC9572XL-7PC44I can consolidate sensor thresholds represented as logic signals, debounce state machines, alarm priorities, event counters, and communication handshakes. Its 72 macro cells provide capacity for several independent channels, while input hysteresis and bus-hold circuitry help preserve logic states on inactive or tri-stated inputs. The 3.3 V operation suits modern sensor and processor interfaces, and the 7.5 ns grade minimizes logic delay in decision paths. Actual analog thresholds, electrical noise immunity, and fail-safe behavior remain system-level concerns and must not be delegated to the programmable logic device.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: XC9572XL-7PC44I — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | XC9572XL-7PCG44I | XC9572XL-7PC44C | XC9572XL-10PC44I | XC9572XL-10PCG44C | XC9572XL-10PCG44I |
|---|---|---|---|---|---|---|
| Brand | AMD Xilinx | AMD Xilinx | AMD Xilinx | AMD Xilinx | AMD Xilinx | AMD Xilinx |
| Package | 44-terminal QCCJ PLCC | 44-terminal QCCJ PLCC | 44-terminal QCCJ PLCC | 44-terminal QCCJ PLCC | 44-terminal QCCJ PLCC | 44-terminal QCCJ PLCC |
| Logic Capacity | 72 macro cells | 72 macro cells | 72 macro cells | 72 macro cells | 72 macro cells | 72 macro cells |
| Supply Voltage | 3.3 V | 3.3 V | 3.3 V | 3.3 V | 3.3 V | 3.3 V |
| Performance Grade | 7.5 ns | 7.5 ns | 7.5 ns | 10 ns | 10 ns | 10 ns |
| Temperature Grade | Industrial | Industrial | Commercial | Industrial | Commercial | Industrial |
| Configuration Memory | FLASH | FLASH | FLASH | FLASH | FLASH | FLASH |
| In-System Programming | Supported | Supported | Supported | Supported | Supported | Supported |
| Hot-Plug Capability | Supported | Supported | Supported | Supported | Supported | Supported |
主な差別化要因
- Faster timing grade within the same XC9572XL family (vs XC9572XL-10PCG44C)
- Industrial-grade selection for factory and equipment environments (vs XC9572XL-7PC44C)
- Retains 72 macro cells without moving to a larger architecture (vs XC9572XL-10PC44I)
- Direct ordering continuity for existing XC9572XL designs (vs XC9572XL-7PCG44I)
設計ノート
Allocate the PCB land pattern from the QCCJ mechanical drawing and terminal table in AMD DS057, not from a generic 44-pin PLCC library. Confirm body size, lead pitch, lead span, pin-1 orientation, courtyard clearance, and solderable-versus-unsolderable lead assignments before releasing the layout. The exact terminal functions must also be checked for each ordering code because a compatible package does not guarantee identical configuration or control-pin assignments.
Design the 3.3 V supply path so the CPLD receives the required operating voltage and sequencing margin under every programmed state. Follow the decoupling and pin-power requirements in DS057, including the value and placement of local supply capacitors. Keep high-current return paths away from sensitive configuration and programming nets, and inspect the assembled board for shorts between adjacent QCCJ terminals. Hot-plug support is a device capability, not a substitute for system-level power-state protection.
Do not treat the G, C, and I suffixes as cosmetic reel or stock codes. Within XC9572XL ordering codes, they can correspond to package construction, operating-temperature grade, or other qualification attributes. Build a substitution comparison that checks the package drawing, temperature grade, speed grade, terminal functions, configuration architecture, and programmed-device status. A same-family replacement may require a different bitstream even when the PCB land pattern remains compatible.
Use the DS057 input and output timing characteristics to constrain external clock, configuration, boundary-scan, and user-interface paths. Account for board capacitance, pull-up or pull-down values, external driver direction, and the 7.5 ns internal performance grade when defining constraints. Bus-hold, input hysteresis, and individual output enable simplify some interfaces but do not eliminate contention, ringing, or setup-and-hold risks at the board level.
コンプライアンス情報
The component is an industrial-grade programmable logic device, not an automotive AEC-Q100-qualified product. Compliance declarations for this exact ordering code must be confirmed with the manufacturer or an authorized documentation source.