XC9572XL-7PCG44I - Obsolete 72-Macro CPLD | AMD/Xilinx
MPN: XC9572XL-7PCG44I ✗ End of LifeXC9572XL-7PCG44I Overview
A CPLD is a programmable logic device that combines multiple programmable logic blocks, embedded memory, and dedicated input/output structures into a single integrated circuit. In the broader semiconductor hierarchy, the XC9572XL belongs to the programmable-logic family, alongside FPGAs, complex PLDs, and simpler PAL/GAL devices. Its fixed architecture provides predictable timing and a unified nonvolatile configuration approach for consolidating glue logic, control functions, interfaces, and state machines into one component.
Key documented characteristics include 34 user I/O, 44 package terminals, industrial-temperature operation, and a 16.59 mm by 16.59 mm LCC package. The product is cataloged as obsolete, so new-production planning should account for lifecycle constraints. Its 7 ns speed class is relevant where propagation delay and system timing margins matter more than device availability. The J-lead package also provides a mechanically distinct alternative to fine-pitch QFP packages used by other members of the XC9500XL family.
The XC9572XL architecture is intended for designs requiring medium-complexity programmable logic rather than FPGA-level resources. It can be used to implement bus arbitration, address decoding, control sequencing, data formatting, legacy interface adaptation, and peripheral glue logic. Because a CPLD combines programmable logic and dedicated I/O resources in one package, a design can reduce component count and simplify PCB routing when its available macro and memory resources satisfy the application.
Typical uses include industrial controller interfaces, legacy peripheral adapters, programmable control panels, protocol bridges, and embedded system support logic. The 34-I/O configuration is useful for parallel control buses and multi-bit data paths, while the industrial temperature range supports equipment intended for extended indoor and industrial environments. Designs requiring broader logic capacity, more memory, or newer supported tooling should evaluate a current programmable-logic platform before committing the design to this legacy family.
PCB design should preserve the exact 44-LCC footprint, pin assignment, and programmed pin behavior of the original design. Review the manufacturer datasheet DS057 for the complete pin description, configuration requirements, timing tables, and recommended decoupling practices. Do not treat a same-capacity device with a different package suffix as a footprint-compatible substitute; board redesign or respin may be required.
This page consolidates lifecycle information, package constraints, structured alternatives, and practical design guidance around the XC9572XL-7PCG44I. For obsolete-device procurement, the XAIPART Request a Quote form is the appropriate channel for checking exact MPN availability, condition, packaging, and delivery requirements before placing a production order.
Drop-in alternatives for XC9572XL-7PCG44I — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.
Variants in this series
Same-series models that are drop-in compatible with XC9572XL-7PCG44I (same form factor and footprint) — differing in Mounting Type, Temperature Grade, Package Type, RoHS Status.
XC9572XL-10PCG44I
✅ Drop-In📋 Reference alternative (not in catalog)
XC9572XL-10PCG44C
✅ Drop-In ⚠️ Specs Unverified📋 Reference alternative (not in catalog)
XC9572XL-7PCG44C
✅ Drop-In ⚠️ Specs UnverifiedContact for price
View Datasheet →XC9572XL-5PCG44I
✅ Drop-In ⚠️ Specs Unverified📋 Reference alternative (not in catalog)
XC9572XL-5PCG44C
✅ Drop-In ⚠️ Specs Unverified📋 Reference alternative (not in catalog)
XC9572XL-7PCG44I Maximum Ratings & Electrical Characteristics
| Product Type | Complex programmable logic device (CPLD) |
| Device Family | XC9500XL |
| Series | XC9572XL |
| Speed Grade | 7 ns |
| User I/O Count | 34 I/O |
| Package Terminal Count | 44 terminals |
| Package Type | 44-LCC, J-lead, surface mount |
| Package Dimensions | 16.59 mm x 16.59 mm |
| Operating Temperature Range | -40°C to 85°C (TA) |
| Temperature Grade | Industrial |
| Product Status | Obsolete |
| Manufacturer Data Sheet | DS057, revision 1.9, released 2006-03-21 |
| Export Control Classification Number | EAR99 |
| Terminal Form | J-bend |
| Mounting Type | Surface mount |
| RoHS Status | unknown |
| REACH Status | unknown |
XC9572XL-7PCG44I 16.59 mm x 16.59 mm Pin Configuration Guide
Pin configuration for XC9572XL-7PCG44I (16.59 mm x 16.59 mm package). This digital IC includes GPIO, communication interfaces (UART, SPI, I2C), and power pins. Refer to the manufacturer datasheet for alternate pin functions and configuration options. Essential for embedded system design and PCB layout.
No detailed pinout data available for XC9572XL-7PCG44I.
Refer to the datasheet for full pin configuration.
Typical Applications
XC9572XL-7PCG44I is suitable for 6 applications: Industrial Control Logic, Legacy Peripheral Interface, Programmable Bus Interface, Data Acquisition Conditioning, Security and Access Control Logic, Legacy Communication Adapter.
Industrial Control Logic
The XC9572XL-7PCG44I is appropriate for consolidating deterministic control logic around an industrial controller, including command decoding, interlocks, timing sequences, and machine-state control. Its 34 user I/O provide enough parallel connections for control outputs, status inputs, and interface signaling without requiring a large external logic matrix. The 7 ns speed class supports designs with tighter propagation-delay expectations, while the documented -40°C to 85°C industrial range covers extended-temperature indoor equipment. Because the device is obsolete, the preferred use is maintenance or continuation of an established platform rather than an unqualified new production launch. Timing paths, I/O standards, and power sequencing must be validated against the original design.
Legacy Peripheral Interface
A fixed CPLD is useful when a modern controller must communicate with a legacy parallel peripheral using a nonstandard bus, handshake sequence, or mixed-width data format. The XC9572XL-7PCG44I can implement address decoding, latch and mux logic, and protocol state machines within one 44-LCC device. Its 34 user I/O allow data, control, and interrupt signals to be placed on a single logic package, reducing inter-chip routing compared with several discrete gate arrays. The industrial temperature rating suits equipment where temperature cycling is expected. Before reuse, verify the configured I/O behavior, timing margins, and pin assignments in the original design because an obsolete device may be maintained from remaining inventory.
Programmable Bus Interface
The XC9572XL-7PCG44I can act as a programmable interface between systems that do not share a native bus architecture. Engineers can use its logic resources for address comparison, byte-lane routing, ready and acknowledge generation, or an asynchronous handshake between a host and an older peripheral. A 34-I/O device is particularly helpful when a design requires more parallel signals than a small GAL can provide while still being too specialized for a large FPGA. The 7 ns grade should be checked against propagation-delay budgets across address, control, and data paths. Configuration integrity and power-up behavior also require verification when maintaining an installed design.
Data Acquisition Conditioning
In a data-acquisition system, the XC9572XL-7PCG44I can handle trigger alignment, channel selection, sample sequencing, status flags, and interface isolation between an acquisition section and a controller. The 34 user I/O support parallel trigger, timing, and command signals, while the 7 ns speed class can assist with tightly constrained combinational decoding paths. A fixed CPLD also provides deterministic behavior that is useful in recurring measurement sequences. The industrial rating is appropriate for laboratory and industrial instrumentation with extended ambient requirements. Engineers should review input thresholds, output timing, and configuration security in addition to confirming that the device's available resources match the original implementation.
Security and Access Control Logic
The XC9572XL-7PCG44I can implement access-control sequencing, credential-state tracking, alarm masking, and actuator authorization in equipment that requires deterministic logic close to an interface. Its 34 user I/O allow readers, indicators, locks, and supervisory signals to be coordinated through a single programmable-logic device. The 7 ns class can reduce delay in decision paths, although end-to-end security timing must include sensor, relay, and communication delays. The obsolete lifecycle status makes the device most appropriate for an existing certified or fielded platform where redesign would require revalidation. Configuration controls and undocumented state should be reviewed to avoid retaining insecure defaults.
Legacy Communication Adapter
The XC9572XL-7PCG44I is suitable for adapting a modern controller to a legacy communication interface through byte assembly, parity generation, framing control, or transmitter and receiver sequencing. Its 34 user I/O can support parallel data buses alongside handshake and interrupt signals, reducing the number of external logic packages required. The industrial temperature range supports instrumentation and industrial-control installations, while the 7 ns speed grade may preserve timing margins in established designs. Because the component is obsolete, avoid creating new dependencies without a supply plan. Validate framing behavior, electrical standards, and timing using the original source design and AMD datasheet DS057, revision 1.9.
Engineering reference data for XC9572XL-7PCG44I — comparison, design guidance, and compliance information.
Selection Guide
Comparison with Alternatives
| Parameter | This Product | XC9572XL-10PCG44I | XC9572XL-10PCG44C | XC9572XL-7PCG44C | XC9572XL-5PCG44I | XC9572XL-5PCG44C |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 44-LCC (J-Lead) | 44-LCC (J-Lead) | 44-LCC (J-Lead) | 44-LCC (J-Lead) | 44-LCC (J-Lead) | 44-LCC (J-Lead) |
| Product Family | XC9572XL / XC9500XL | XC9572XL / XC9500XL | XC9572XL / XC9500XL | XC9572XL / XC9500XL | XC9572XL / XC9500XL | XC9572XL / XC9500XL |
| Nominal Speed Grade | 7 ns | 10 ns | 10 ns | 7 ns | 5 ns | 5 ns |
| Temperature Grade | Industrial, -40°C to 85°C | Industrial, -40°C to 85°C | Commercial | Commercial | Industrial, -40°C to 85°C | Commercial |
Key Differentiators
- Matches the established 7 ns industrial timing class (vs XC9572XL-10PCG44I)
- Provides the required industrial temperature qualification (vs XC9572XL-7PCG44C)
- Retains a 34-I/O, 44-LCC system footprint (vs XC9572XL-7TQG100I)
- Matches the original system timing without qualification changes (vs XC9572XL-5PCG44I)
Design Notes
Use the exact 44-LCC J-lead footprint and verify it against the package drawing in AMD datasheet DS057, revision 1.9. A device identified with a VQG or TQG suffix is not a footprint-compatible substitute, even if it uses the same XC9572XL device family. Before ordering a PCG44 variant, compare pin numbers, lead pitch, body size, and pad geometry mechanically as well as electrically. For maintenance builds, load the original CAD library and run a package-to-copper comparison to prevent errors caused by confusing PLCC and TQFP footprint naming conventions.
Review every timing-critical path against the selected speed grade. Moving from the 7 ns target to a 10 ns alternative can add 3 ns of nominal delay and may invalidate setup or hold assumptions in synchronous interfaces. Moving to a 5 ns grade can also change input and output timing characteristics even though it is nominally faster. Re-run static timing analysis at the intended clock rate and temperature, then validate board-level timing with representative stimulus. Do not rely on the device family name alone as proof that a speed-grade substitution is functionally equivalent.
Treat commercial-temperature C-grade variants as unsuitable substitutes for the industrial XC9572XL-7PCG44I unless the completed product has a documented commercial ambient requirement. The suffix difference changes the temperature qualification even though the family architecture and package remain similar. Also verify the programmed configuration, I/O standards, configuration pins, and power-up behavior against the original device. A mechanically compatible replacement that is not electrically, thermally, or lifecycle-equivalent can still create production and field-reliability problems.
Use the pin-description and recommended decoupling information in AMD datasheet DS057 when planning the power network. Place required bypass capacitors close to their associated supply pins, keep the device-ground return path short, and route high-current or noisy inputs away from sensitive configuration and clock nets. Because the target is obsolete and older documentation may describe nonvolatile configuration behavior differently from newer CPLDs, verify the exact configuration procedure in the project rather than assuming that another AMD programmable-logic family uses identical power-up sequencing.
Compliance Information
The available product information identifies the device as an obsolete industrial-grade CPLD with EAR99 classification. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations are not stated.