XC9572XL-7PC44I - 72-Macro-Cell 3.3V CPLD | AMD Xilinx
MPN: XC9572XL-7PC44I ✗ Cuối đờiXC9572XL-7PC44I Tóm tắt
A complex programmable logic device, or CPLD, is a programmable semiconductor positioned between simple fixed-function logic and FPGA resources. Its macrocell architecture provides product-term Boolean logic, registers, and programmable interconnect for implementing control logic, state machines, bus arbitration, protocol conversion, and peripheral interfaces. The XC9572XL belongs to the broader hierarchy of programmable logic devices, which includes simple PLDs, CPLDs, and FPGAs.
Key characteristics include 72 macro cells, 44 package terminals, a 3.3 V supply, and a 7.5 ns speed grade. Individual output-enable control, local output inversion, input hysteresis, bus-hold capability, and per-pin input features improve implementation flexibility. Flash-based configuration preserves the implemented logic when power is removed, avoiding separate programming after every power cycle.
The device supports a mixture of combinational and registered logic in one package, making it useful for designs that need more deterministic control than a basic PAL or GAL while avoiding the resource scale and complexity of larger FPGAs. Its PLCC package provides 44 physical terminals for board-level assembly, and the family documentation describes in-system programming and boundary-scan-compatible operation.
Typical uses include industrial controller logic, data-acquisition interfaces, legacy peripheral emulation, automated-test equipment, sensor conditioning, motor-control sequencing, and communication bridge logic. The 72-macro-cell capacity is particularly appropriate for multiple state machines, bus controls, and protocol interfaces that must retain their configuration during power interruptions.
Designers should preserve the device's required power, programming, and configuration behavior exactly as described in the manufacturer data sheet. PCB allocation must follow the 44-terminal PLCC footprint and its pin designations, while software, design-entry, programming-cable, and in-system-programming choices must be checked against the legacy XC9500XL tool flow before schematic capture begins.
This product page consolidates the verified manufacturer specifications, package details, programming references, lifecycle position, and available drop-in family alternatives. It also provides practical selection and replacement guidance that helps engineers distinguish speed-grade, temperature-grade, and package differences before approving a substitution.
Bộ thay thế dễ dàng lắp đặt cho XC9572XL-7PC44I — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với XC9572XL-7PC44I (cùng hình factor và footprint) — khác nhau ở Package Type.
XC9572XL-7PCG44I
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →XC9572XL-7PC44C
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
XC9572XL-10PC44I
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
XC9572XL-10PCG44C
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
XC9572XL-10PCG44I
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
XC9572XL-7PC44I Tỷ lệ tối đa & tính chất điện
| Device Type | Complex Programmable Logic Device (CPLD) |
| Product Family | XC9572XL |
| Logic Capacity | 72 macro cells |
| Điện áp cung cấp | 3.3 V |
| Performance Grade | 7.5 ns |
| Package Type | 44-terminal square PLCC, QCCJ package code |
| Number of Terminals | 44 |
| Kiểu lắp đặt | Surface mount |
| Temperature Grade | Industrial |
| Configuration Memory | FLASH |
| In-System Programming | Supported |
| Hot-Plug Capability | Supported |
| Individual Output Enable | Supported for each output pin |
| Local Output Inversion | Supported |
| Input Hysteresis | Present on user and boundary-scan inputs |
| Bus-Hold Circuitry | Present on user pin inputs |
| Boundary Scan | Supported |
Hướng dẫn cấu hình chân XC9572XL-7PC44I 44-terminal square plcc, qccj package code
Cấu hình chân cho XC9572XL-7PC44I (44-terminal square plcc, qccj package code gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho XC9572XL-7PC44I.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
XC9572XL-7PC44I phù hợp cho 6 Áp dụngs: Industrial Controller Glue Logic, Data-Acquisition Interface Control, Legacy Peripheral Emulation, Automated Test Equipment Control, Motor and Motion Sequencing, Sensor and Alarm Interface.
Industrial Controller Glue Logic
The XC9572XL-7PC44I is well suited to consolidating several control functions into one 72-macro-cell CPLD while retaining its implementation in Flash configuration memory. Its 7.5 ns performance grade provides additional timing margin for combinational control paths, registered state machines, interlocks, and alarm sequencing compared with the 10 ns family variants. The 44-terminal PLCC package also gives designers access to a substantial number of user I/Os for connecting discrete sensors, actuators, status indicators, and inter-module handshake signals. Industrial suitability must be confirmed against the operating-temperature and electrical limits in DS057.
Được đề xuất
Data-Acquisition Interface Control
A 72-macro-cell XC9572XL-7PC44I can implement acquisition sequencing, sample counters, channel multiplexing, trigger routing, and buffer-control logic around external converters or sensors. The 3.3 V operating class integrates with modern low-voltage digital interfaces, while individual output enable and local inversion support flexible routing and bus control. The 7.5 ns grade is useful when control latency must be minimized, although signal integrity and input timing must still be evaluated for the selected external devices. In-system programming permits configuration updates without removing the CPLD from the assembled board.
Được đề xuất
Legacy Peripheral Emulation
The XC9572XL-7PC44I can bridge or emulate older bus interfaces by implementing deterministic state machines, interrupt logic, address decoding, and data-path control in a single programmable device. Its 72 macro cells provide more logic density than a simple GAL while keeping the design centered on the established XC9500XL architecture. The 44-terminal package supports enough connections for bidirectional buffers, control signals, and shared-bus transceivers. Because a CPLD substitution can alter pin behavior even within one family, engineers should compare terminal functions, timing constraints, and pin-direction behavior directly against the original design.
Được đề xuất
Automated Test Equipment Control
In automated test equipment, the XC9572XL-7PC44I can implement pattern sequencing, instrument enables, timing gates, binning logic, and interlock functions with predictable Flash-retention behavior. Its 72 macro cells are suitable for parallel control tasks, while the 7.5 ns grade helps minimize combinational control delay. Individual output enable supports shared resources that must be isolated during tests. The industrial grade designation is relevant to factory environments, but the finished equipment must still meet its own safety, isolation, reliability, and calibration requirements. Use the official package drawing when planning the 44-terminal assembly footprint.
Được đề xuất
Motor and Motion Sequencing
The XC9572XL-7PC44I can coordinate stepper or brushless-motor sequencing, direction decoding, limit-switch handling, fault latching, and digital drive-enable signals. Its 72 macro cells allow multiple coordinated state machines to coexist without moving to a larger FPGA, and the 3.3 V interface matches common controller logic. The 7.5 ns grade provides useful margin for command decoding, but motor-driver timing, isolation, protection, and grounding must be designed separately. Hot-plug support should not be interpreted as permission to energize a motor during partial board insertion; system-level power sequencing must prevent unsafe intermediate states.
Được đề xuất
Sensor and Alarm Interface
The XC9572XL-7PC44I can consolidate sensor thresholds represented as logic signals, debounce state machines, alarm priorities, event counters, and communication handshakes. Its 72 macro cells provide capacity for several independent channels, while input hysteresis and bus-hold circuitry help preserve logic states on inactive or tri-stated inputs. The 3.3 V operation suits modern sensor and processor interfaces, and the 7.5 ns grade minimizes logic delay in decision paths. Actual analog thresholds, electrical noise immunity, and fail-safe behavior remain system-level concerns and must not be delegated to the programmable logic device.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho XC9572XL-7PC44I — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | XC9572XL-7PCG44I | XC9572XL-7PC44C | XC9572XL-10PC44I | XC9572XL-10PCG44C | XC9572XL-10PCG44I |
|---|---|---|---|---|---|---|
| Brand | AMD Xilinx | AMD Xilinx | AMD Xilinx | AMD Xilinx | AMD Xilinx | AMD Xilinx |
| Package | 44-terminal QCCJ PLCC | 44-terminal QCCJ PLCC | 44-terminal QCCJ PLCC | 44-terminal QCCJ PLCC | 44-terminal QCCJ PLCC | 44-terminal QCCJ PLCC |
| Logic Capacity | 72 macro cells | 72 macro cells | 72 macro cells | 72 macro cells | 72 macro cells | 72 macro cells |
| Supply Voltage | 3.3 V | 3.3 V | 3.3 V | 3.3 V | 3.3 V | 3.3 V |
| Performance Grade | 7.5 ns | 7.5 ns | 7.5 ns | 10 ns | 10 ns | 10 ns |
| Temperature Grade | Industrial | Industrial | Commercial | Industrial | Commercial | Industrial |
| Configuration Memory | FLASH | FLASH | FLASH | FLASH | FLASH | FLASH |
| In-System Programming | Supported | Supported | Supported | Supported | Supported | Supported |
| Hot-Plug Capability | Supported | Supported | Supported | Supported | Supported | Supported |
Bảo phân biệt quan trọng
- Faster timing grade within the same XC9572XL family (vsXC9572XL-10PCG44C)
- Industrial-grade selection for factory and equipment environments (vsXC9572XL-7PC44C)
- Retains 72 macro cells without moving to a larger architecture (vsXC9572XL-10PC44I)
- Direct ordering continuity for existing XC9572XL designs (vsXC9572XL-7PCG44I)
Ghi chú thiết kế
Allocate the PCB land pattern from the QCCJ mechanical drawing and terminal table in AMD DS057, not from a generic 44-pin PLCC library. Confirm body size, lead pitch, lead span, pin-1 orientation, courtyard clearance, and solderable-versus-unsolderable lead assignments before releasing the layout. The exact terminal functions must also be checked for each ordering code because a compatible package does not guarantee identical configuration or control-pin assignments.
Design the 3.3 V supply path so the CPLD receives the required operating voltage and sequencing margin under every programmed state. Follow the decoupling and pin-power requirements in DS057, including the value and placement of local supply capacitors. Keep high-current return paths away from sensitive configuration and programming nets, and inspect the assembled board for shorts between adjacent QCCJ terminals. Hot-plug support is a device capability, not a substitute for system-level power-state protection.
Do not treat the G, C, and I suffixes as cosmetic reel or stock codes. Within XC9572XL ordering codes, they can correspond to package construction, operating-temperature grade, or other qualification attributes. Build a substitution comparison that checks the package drawing, temperature grade, speed grade, terminal functions, configuration architecture, and programmed-device status. A same-family replacement may require a different bitstream even when the PCB land pattern remains compatible.
Use the DS057 input and output timing characteristics to constrain external clock, configuration, boundary-scan, and user-interface paths. Account for board capacitance, pull-up or pull-down values, external driver direction, and the 7.5 ns internal performance grade when defining constraints. Bus-hold, input hysteresis, and individual output enable simplify some interfaces but do not eliminate contention, ringing, or setup-and-hold risks at the board level.
Thông tin tuân thủ
The component is an industrial-grade programmable logic device, not an automotive AEC-Q100-qualified product. Compliance declarations for this exact ordering code must be confirmed with the manufacturer or an authorized documentation source.