Mikrokontroler

Produk (20.000+)

S9S12C128J2CFUE - 16-Bit 128KB MCU 25MHz | NXP
S9S12C128J2CFUE

S9S12C128J2CFUE - 16-Bit 128KB MCU 25MHz | NXP

The NXP Semiconductors S9S12C128J2CFUE is a 16-bit S12-core microcontroller with 128KB flash memory, a 25 MHz stated rating from the NXP product page, and an 80-pin QFP package. The distributor listing also identifies a 50 MHz HCS12 device with 128KB flash in an 80-QFP package, so the maximum clock interpretation should be checked against the applicable datasheet revision before design release. A microcontroller is a programmable integrated circuit that executes firmware, reads sensor inputs, controls actuators, and coordinates embedded-system timing. In the product hierarchy, this device belongs to the HCS12/S12 automotive and industrial embedded-control family, which sits below general-purpose microcontrollers and above application-specific control logic. The verified manufacturer snippet highlights a 16-bit S12 core, 128KB flash, 25 MHz, a -40°C to +85°C temperature range, automotive qualification, and QFP-80 packaging. The related MC9S12C128CFUE family information identifies flash-based general-purpose devices, an on-chip voltage regulator, a 2.97 V to 5.5 V external supply range, and a PLL circuit. Those family details are useful context, but they should not be treated as target-specific values unless confirmed in the exact S9S12C128J2CFUE datasheet. Typical embedded uses include automotive body and network control modules, industrial controllers, sensor interfaces, actuator controllers, and real-time monitoring equipment. The 80-pin QFP package provides a conventional leaded footprint that is easier to inspect and rework than a fine-pitch BGA, while requiring more PCB area than a compact QFN. Design engineers should confirm the complete pin assignment, clock configuration, memory map, electrical limits, and automotive qualification statement before layout or firmware release. This page separates verified product-page facts from unresolved details and does not invent missing specifications. The component is positioned as a 16-bit embedded controller rather than a low-power sensor node or a high-performance application processor. Its QFP-80 format and 128KB flash make it relevant to designs needing transparent inspection, conventional prototyping, and automotive-oriented control logic. This data page consolidates the official NXP description, distributor availability references, package information, and engineering-oriented caveats while explicitly identifying the clock discrepancy and the fields that still require datasheet confirmation.

Permintaan RFG Kontak
S9S12C128J2VFUE - 16-Bit 128KB Flash 80-QFP MCU | NXP
S9S12C128J2VFUE

S9S12C128J2VFUE - 16-Bit 128KB Flash 80-QFP MCU | NXP

The NXP Semiconductors S9S12C128J2VFUE is a 16-bit S12C-family HCS12 microcontroller with 128 KB of flash memory, operation up to 25 MHz according to the component summary, and an 80-pin QFP package measuring 14 x 14 mm. It is identified as automotive qualified and supports temperature grades listed as -40°C to +105°C in the verified component description. A microcontroller is a programmable integrated circuit that combines a processor core, memory, and peripherals in one package. The S12C family combines a 16-bit core with flash-based program memory and is positioned for general-purpose industrial and automotive network applications. Unlike a simple logic device, the S9S12C128J2VFUE can execute embedded software, manage external interfaces, and control system behavior through its integrated peripherals. The verified listing identifies the device as a 16-bit MCU with an S12 core, 128 KB flash, 25 MHz operation, automotive qualification, and an 80-QFP package. A separate distributor listing describes the related HCS12 device as 50 MHz; because the verified sources conflict on maximum frequency, the package-level claims should be confirmed against the applicable NXP datasheet before selecting timing, clocking, or firmware configurations. Typical embedded uses include automotive body or network electronics, industrial controllers, sensor interfaces, actuator controllers, and communication equipment where a low-cost 16-bit microcontroller with on-board flash is useful. The 80-QFP package provides a larger pin count than small 32-pin devices, potentially supporting more external signals and peripheral connections while requiring careful PCB layout. When designing a board around this MCU, verify the exact pinout, power rails, clock configuration, reset requirements, and peripheral multiplexing in the NXP datasheet. Do not infer compatibility from the package name alone. The QFP footprint and exposed lead arrangement must match exactly, and firmware should be tested against the intended voltage, temperature, and automotive operating conditions. This page consolidates the verified component identity, package information, source listings, and practical selection considerations. It also distinguishes confirmed facts from data that requires manufacturer-documentation review, helping engineers avoid treating conflicting distributor descriptions as final design specifications.

Permintaan RFG Kontak
S9S12C32F1MFA2E557 - 16-bit HCS12 MCU 50MHz 32KB | NXP
S9S12C32F1MFA2E557

S9S12C32F1MFA2E557 - 16-bit HCS12 MCU 50MHz 32KB | NXP

The NXP Semiconductors S9S12C32F1MFA2E557 is a 16-bit HCS12 C-family microcontroller running at up to 50 MHz with 32KB (32K x 8) on-chip FLASH, housed in a 48-pin LQFP (7x7 mm) surface-mount package. A 16-bit HCS12 microcontroller is a member of the microcontroller (MCU) hierarchy: embedded processor, system-on-chip, integrated circuit. The HCS12 (S12) core, originally developed by Freescale Semiconductor and now manufactured by NXP, executes the established 68HC12 instruction set and integrates CPU, memory, clock generation, and peripheral functions on a single die, making it a complete embedded control solution. Key features of the S9S12C32F1MFA2E557 include a 50 MHz bus-capable 16-bit CPU core, 32KB of single-supply FLASH program memory, and 31 general-purpose I/O lines. Peripheral connectivity covers CANbus, SCI (serial communications interface), SPI (serial peripheral interface), and an external bus interface (EBI/EMI), enabling automotive and industrial networked designs. On the analog side, the device integrates an 8-channel 10-bit SAR analog-to-digital converter, sufficient for sensor acquisition tasks such as battery voltage monitoring, temperature measurement, and potentiometer or throttle-position sensing in vehicle electronics. The HCS12 architecture is widely used in body electronics, instrument clusters, and motor control nodes where legacy tool chains and code bases remain valuable. Typical applications include automotive body modules, industrial CANbus nodes, consumer appliance controllers, and legacy HCS12 design maintenance. The LQFP-48 (7x7) footprint supports standard surface-mount assembly processes. Designers should verify exact operating temperature range, RAM size, EEPROM size, and supply voltage parameters against the official NXP datasheet, as distributor listings summarize only headline specifications. This page synthesizes distributor availability data, drop-in family alternatives, and practical design guidance not consolidated in the manufacturer datasheet, with pricing and stock references as of 2026-10-18.

Permintaan RFG Kontak
S9S12C32F1VFA1E - 16-Bit 32KB Flash MCU | NXP | Automotive
S9S12C32F1VFA1E

S9S12C32F1VFA1E - 16-Bit 32KB Flash MCU | NXP | Automotive

The NXP Semiconductors S9S12C32F1VFA1E is a 16-bit S12-core microcontroller operating at 25 MHz, with 32 KB of flash memory and an external supply range of 2.97 V to 5.5 V, housed in a 48-pin LQFP package. It is automotive qualified for an operating range of -40°C to +105°C and targets general-purpose industrial and automotive network applications. A microcontroller is a programmable integrated circuit containing a processor core, nonvolatile program memory, data memory, and peripherals that control embedded-system inputs and outputs. The S12C belongs to a 48-, 52-, or 80-pin flash-based MCU family and combines deterministic 16-bit processing with external communications, timing, and control functions. Its on-chip bandgap-based voltage regulator generates the internal digital VDD supply. Key verified features include a 16-bit S12 core, 25 MHz maximum frequency, 32 KB flash, a 2.97 V to 5.5 V external supply range, and an integrated phase-lock loop circuit. These resources support embedded control loops that need more timing precision than an unsynchronized low-cost oscillator arrangement can provide. The automotive qualification and -40°C to +105°C temperature range distinguish it from typical consumer-temperature controls. The device is positioned within NXP's broader embedded processing hierarchy: S12 core, S12C microcontroller family, flash-based MCU, embedded controller, and semiconductor. That hierarchy matters because replacement decisions depend on exact software compatibility, memory organization, peripheral mapping, clock behavior, package pins, and qualification—not merely CPU frequency. A substitute with the same nominal clock or memory size may still require firmware and PCB changes. Typical uses include automotive body or network controllers, industrial automation modules, communication gateways, sensor-control systems, and compact embedded platforms. The PLL permits internal clock generation where the application requires derived clock domains, while the internal regulator separates the external operating supply from the internally regulated digital rail. The most important design step is to use the official NXP datasheet and pin configuration rather than treating a generic S12C listing as a complete electrical contract. Verify supply pins, decoupling, clock setup, reset behavior, unused I/O, programming, and all peripheral multiplexing before layout release. Because the verified data does not provide current unit prices, stock, complete pin names, or a manufacturer PDF URL, those fields remain explicitly unresolved rather than inferred.

Permintaan RFG Kontak
S9S12C96F0CFUER - 16-bit HCS12 MCU 96KB Flash | NXP Semiconductors
S9S12C96F0CFUER

S9S12C96F0CFUER - 16-bit HCS12 MCU 96KB Flash | NXP Semiconductors

The NXP Semiconductors S9S12C96F0CFUER is a 16-bit HCS12 microcontroller from the S12C family, featuring 96KB of on-chip Flash memory, 4KB RAM, and an industrial-grade operating temperature range, housed in an 80-pin LQFP surface-mount package. The device integrates the S12 CPU core running up to 25 MHz bus clock with a BDM (Background Debug Mode) interface, supporting in-circuit emulation and on-chip hardware breakpoints for embedded development workflows. A microcontroller (MCU) is a single-chip computer containing a processor core, program memory (Flash/ROM), working memory (RAM), and a rich set of peripheral interfaces. The S9S12C96F0CFUER belongs to the HCS12 architecture family, a 16-bit MCU line widely deployed in automotive body electronics, industrial control, and consumer appliance applications. The S12C family specifically targets cost-sensitive designs requiring CAN connectivity, analog integration, and Flash-based field reprogrammability without the overhead of larger HCS12 derivatives. Key features of this part include an enhanced CAP (TPU) timer system, an 8-channel 10-bit ADC, up to two SCI (UART) ports, one SPI interface, an I2C-compatible module, and an MSCAN (CAN 2.0A/B) controller. The device operates from 2.97V to 5.5V supply, supports single-wire BDM debugging, and offers an internal Phase-Locked Loop (PLL) for flexible clock generation. The wide supply range simplifies integration into both 3.3V and 5V system designs. The S12 core employs a 16-bit accumulator-based architecture with 20-bit ALU extensions (page registers), enabling efficient C code generation while preserving deterministic interrupt response. The on-chip voltage regulator permits single 5V rail operation by internally generating the core logic supply. A hardware Periodic Interrupt Timer (PIT) and real-time interrupt (RTI) provide a low-power tick source during STOP and WAIT modes. Typical applications include automotive body controllers, HVAC systems, instrument clusters, sensor interface nodes, industrial CAN-based distributed I/O, and consumer appliance control boards. The 96KB Flash supports moderate-sized application code plus bootloader space for field updates via CAN or SCI. The 80-pin LQFP footprint provides ample GPIO for parallel sensor acquisition and discrete actuator drive. When designing with this device, ensure the reset supervisor hold-time capacitor on the RESET pin meets the minimum 16 E-clock cycle requirement to avoid spurious startup. Place a 100 nF decoupling capacitor adjacent to each VDD/VSS pair, and route the oscillator traces with a guard ring to minimize EMI susceptibility. For CAN bus nodes, the bus termination and common-mode choke selection must conform to ISO 11898. This page synthesizes distributor pricing, same-family drop-in alternatives, and practical design considerations not found in the standalone manufacturer datasheet, accelerating your component selection and PCB bring-up workflow.

Permintaan RFG Kontak
S9S12C96F0MFUER - 16-Bit 96KB Flash 25MHz MCU | NXP
S9S12C96F0MFUER

S9S12C96F0MFUER - 16-Bit 96KB Flash 25MHz MCU | NXP

The NXP Semiconductors S9S12C96F0MFUER is an automotive-qualified 16-bit microcontroller with a 25 MHz S12 core, 96 KB of embedded Flash, and an 80-lead square QFP package. It is designed for embedded control applications requiring deterministic operation, integrated Flash program memory, and operation across -40°C to +125°C. What is a 16-bit embedded microcontroller? A 16-bit embedded microcontroller combines a central processing unit, Flash memory, data memory, timers, serial interfaces, and digital I/O in one integrated circuit. Within the hierarchy of semiconductor devices, an MCU is a microcontroller and embedded-control component designed to execute firmware in motor, body, instrument, or industrial-control systems. The S12C96 family targets applications requiring more program storage than smaller S12 devices while retaining a familiar 16-bit architecture. The verified product information identifies 96 KB of Flash, a 25 MHz maximum core frequency, automotive temperature grade, and an 80-terminal QFP package. Its 16-bit processing architecture supports embedded control workloads where predictable computation and broad peripheral integration are more important than maximum processor-clock frequency. The extended -40°C to +125°C range makes it suitable for demanding industrial and automotive environments, subject to the complete manufacturer datasheet and qualification requirements. The 80-lead QFP provides substantially more external connections than a small-outline package, supporting devices whose integrated peripherals require numerous multiplexed I/O, communication, timer, analog, and power pins. Package selection remains important because gull-wing leads are inspectable after soldering but occupy more PCB area than leadless packages. Exact pin functions, multiplexing, memory organization, supply limits, peripheral configuration, and electrical characteristics were not included in the supplied verified data and therefore must be confirmed from the official device documentation before design release. Typical uses include automotive body and chassis controllers, climate-control modules, actuator controllers, sensor aggregation units, industrial automation equipment, and compact embedded control systems. In an automotive module, the MCU could execute control firmware, acquire sensor inputs, operate timers and communication interfaces, and manage actuator outputs within the -40°C to +125°C temperature grade. Design with the target voltage, clocking method, reset requirements, decoupling, programming interface, and exposed peripheral pin multiplexing verified against the manufacturer documentation. Do not substitute a mechanically similar QFP part solely by package shape; Flash size, core frequency, pin functions, memory map, qualification, and firmware compatibility must match. This page synthesizes verified distributor and manufacturer information with explicit data gaps for engineering review. Because the verified results do not provide a complete pin table, detailed electrical limits, lifecycle declaration, or validated replacement list, those items remain marked for confirmation rather than being inferred.

Permintaan RFG Kontak
S9S12D64J2CFU - 16-bit S12 MCU, 64KB Flash, HCS12 Core | NXP
S9S12D64J2CFU

S9S12D64J2CFU - 16-bit S12 MCU, 64KB Flash, HCS12 Core | NXP

The NXP Semiconductors S9S12D64J2CFU is a 16-bit HCS12 microcontroller from the S12D family featuring 64KB of on-chip Flash memory and a 32KB HCS12 CPU core, designed for automotive and industrial real-time control applications. The device is packaged in a 80-pin QFP (QFU) form factor and integrates a rich peripheral set including multiple CAN 2.0 modules, SPI/SCI/I2C serial interfaces, timers, and an 8-channel 10-bit ADC for sensor acquisition and motor control. A microcontroller (MCU) is a single-chip computer containing a CPU core, program memory, data RAM, and integrated peripherals. The HCS12 family occupies the 16-bit tier of the NXP S12 automotive MCU portfolio, positioned below 32-bit Power Architecture/S32K devices and above 8-bit S08 parts. HCS12 devices target cost-sensitive, deterministic, real-time applications where 8-bit throughput is insufficient and 32-bit cost is unjustified, typically body electronics, chassis control, and industrial sensor nodes. The S12D sub-family adds enhanced peripherals and larger memory compared to base S12 members. Key features of the S9S12D64J2CFU include 2KB of EEPROM for non-volatile data, 4KB of RAM for working data, a background debug module (BDM) for in-circuit programming and debug, and an enhanced capture timer suitable for PWM-driven motor control. The part supports single-supply 5V operation typical of automotive body controllers, and offers low-power stop and wait modes for quiescent-current-critical designs. The S9S12D64J2CFU is widely used in automotive body control modules, CAN node ECUs, HVAC actuators, instrument clusters, and industrial sensor hubs where deterministic interrupt response and CAN connectivity are essential. Designers favor the HCS12 architecture for its mature toolchain (CodeWarrior, GCC for S12) and large installed base of production-tested software. When designing with this part, allocate the BDM pins (BKGD, MODC) to a debug header accessible after PCB assembly, and observe the datasheet-recommended decoupling network of 0.1uF + 4.7uF bulk capacitors close to the supply pins. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

Permintaan RFG Kontak
S9S12DG12F1CFUE - 16-bit HCS12 MCU, 128KB Flash, 25MHz | NXP
S9S12DG12F1CFUE

S9S12DG12F1CFUE - 16-bit HCS12 MCU, 128KB Flash, 25MHz | NXP

The NXP S9S12DG12F1CFUE is an automotive-qualified 16-bit HCS12 CISC microcontroller featuring 128KB of on-chip Flash memory and a 25MHz bus clock, housed in an 80-pin PQFP (QFP-80) package. It integrates two asynchronous SCI (UART) channels, two 8-channel 10-bit ADC modules, and an 8-channel enhanced capture timer, delivering a complete automotive body and chassis control platform on a single die. What is an HCS12 microcontroller? The HCS12 (also called S12) is a 16-bit CISC microcontroller family introduced by Motorola (later Freescale, now NXP) as the evolution of the HC11 architecture. HCS12 devices belong to the broader category of automotive microcontrollers within the embedded MCU hierarchy (MCU -> microcontroller -> embedded processor -> semiconductor). The S12 core offers a rich peripheral set, large unified memory mapping, and BDM (Background Debug Mode) for non-intrusive in-circuit debug, making it a workhorse for automotive body electronics, industrial control, and white-goods motor control. Key features of the S9S12DG12F1CFUE include 128KB (128K x 8) Flash, 2KB to 4KB RAM depending on mask set, 25MHz maximum bus frequency, dual 10-bit ADC with 8 channels each, dual SCI/UART, an 8-channel enhanced capture timer, and a -40C to +85C automotive operating temperature range. The wide 2.5V/5V supply tolerance allows direct interfacing to 5V automotive sensors without level shifters. Technically, the S9S12DG12F1CFUE uses the S12 CPU with a 16-bit ALU, 20-bit address bus, and BDM for debug. The peripheral set is identical to the legacy MC9S12DG128 (the S9S12DG12F1CFUE is the automotive-qualified ordering code for that die), so designers familiar with CodeWarrior HC(S)12 toolchains can migrate existing firmware with minimal effort. The PQFP-80 footprint provides generous PCB escape routing for the 16-bit external bus when expanded memory is needed. Typical applications include automotive body control modules (BCM), instrument clusters, HVAC actuators, lighting controllers, anti-lock brake system (ABS) sensor interfaces, and industrial CAN-node endpoints. The automotive-grade qualification (per NXP ordering code 'S' prefix) makes the part suitable for under-hood and chassis-mounted ECUs that must survive wide temperature swings. When designing with the S9S12DG12F1CFUE, engineers should note that the part is now reported by NXP as End-of-Life (EOL) for new designs; long-term production runs should evaluate the active S12G or S12XS successor families, while existing designs can still source the part through authorized distributors. Decoupling must follow NXP's AN2720 guidance with 100nF ceramic caps on every VDD/VSS pair. This page synthesizes distributor pricing, drop-in same-package alternatives from the S9S12 family, and design considerations that complement the manufacturer datasheet rather than duplicating it.

Permintaan RFG Kontak
S9S12DG12F1CPVE - 16-Bit 25MHz 128KB Flash MCU | NXP
S9S12DG12F1CPVE

S9S12DG12F1CPVE - 16-Bit 25MHz 128KB Flash MCU | NXP

The NXP Semiconductors S9S12DG12F1CPVE is a 16-bit HCS12/S12 automotive-qualified microcontroller with 128KB of flash memory, a 25MHz operating frequency, and a 112-pin LQFP package. It is designed for embedded automotive and industrial control systems requiring deterministic real-time peripherals, serial connectivity, and broad digital and analog input support. An HCS12 microcontroller is an embedded MCU architecture that combines a 16-bit CPU core with flash program memory, RAM, timers, communication interfaces, and analog peripherals on one device. The S12 family is commonly used in vehicle body, powertrain-adjacent, industrial, and communications systems where predictable timing, deterministic interrupt handling, and long product lifecycles are important. The verified part information identifies the S9S12DG12F1CPVE as a 16-bit MCU with an S12 core, 128KB flash, 25MHz operation, 91 I/O, and automotive qualification. Its listed peripherals include two asynchronous serial communications interfaces, an eight-channel interrupt/OC enhanced capture timer, and two eight-channel 10-bit analog-to-digital converters. The part also has connectivity described as CANbus, I²C, SCI, and SPI, plus PWM and watchdog functions. The device is offered in a 112-LQFP package measuring 20mm by 20mm according to the distributor data. Its operating temperature range is listed as -40°C to +85°C. This combination makes it relevant to automotive controllers, body electronics, industrial automation, sensor aggregation, actuator control, and CAN-connected embedded systems where a 16-bit control platform and multiple peripheral functions are required. Because the NXP product page identifies the component as end of life, new designs should verify long-term availability and migration requirements before committing to the device. Existing automotive or industrial products may still find supply through authorized distributors, but firmware, tooling, qualification records, and exact package compatibility should be reviewed before substitution. For PCB integration, use the manufacturer datasheet and package drawing to confirm every pin assignment, pin multiplexing, power requirement, clock configuration, and decoupling value. The LQFP footprint offers accessible pins for automated assembly, but the 112-pin package still requires careful escape routing, ground-plane continuity, and thermal planning. This product page consolidates verified manufacturer and distributor information, package details, lifecycle status, comparison candidates, and practical replacement guidance. Because the part is marked end of life and the supplied web results do not include detailed pricing or complete manufacturer pinout tables, those fields remain explicitly identified as requiring verification.

Permintaan RFG Kontak
S9S12DG12F1MFUE - S12 16-bit MCU 128KB Flash, 25MHz Auto QFP-80
S9S12DG12F1MFUE

S9S12DG12F1MFUE - S12 16-bit MCU 128KB Flash, 25MHz Auto QFP-80

The NXP S9S12DG12F1MFUE is a 16-bit S12 microcontroller unit (MCU) with 128KB Flash program memory, a 25 MHz HCS12 central processing unit, and an industrial -40/+125 degC temperature range, qualified to the AEC-Q100 automotive standard. It is housed in a 80-pin QFP package with 14x14 mm body outline. What is an S12 microcontroller? An S12 MCU is a 16-bit automotive microcontroller built around the CPU12 core (a variable-length instruction extension of the original HC11 architecture) widely adopted for body electronics, powertrain peripherals, and industrial real-time control. S12 parts typically integrate Flash, EEPROM, RAM, multiple timers, ADC channels, and on-chip CAN/LIN/SPI/SCI peripherals, sitting in the taxonomy as: 16-bit MCU -> automotive microcontroller -> embedded microcontroller -> semiconductor. Key features of the S9S12DG12F1MFUE include 128KB on-chip Flash, 8KB RAM, 2x asynchronous SCI, 8-channel IC/OC enhanced capture timer, two 8-channel 10-bit ADC modules, plus background debug mode (BDM) support. The 80-QFP footprint gives ample GPIO and peripheral access while remaining hand-solderable on moderate-density boards. The device employs a 16-bit CPU12 core with a 25 MHz bus clock and integrates a robust peripheral set for automotive body and chassis subsystems. Internal PLL and oscillator support a wide range of external crystals, and on-chip voltage regulation minimizes external power-tree complexity. The Flash memory supports in-application reprogramming and security-lock modes for OEM IP protection. Typical applications include automotive body control modules (BCMs), HVAC actuators, instrument clusters, lighting controllers, industrial sensor hubs, and CAN-connected slaves. Pin compatibility across the S12D family enables flexible in-design transitions between density variants. When designing with this part, note that the 125 degC automotive temperature grade requires careful thermal management inside sealed enclosures and a robust decoupling network of 100 nF + 4.7 uF near each supply pin. The BDM interface is essential for first-time calibration and in-field firmware updates. This page synthesizes distributor pricing, drop-in pin-compatible alternatives, and practical design notes that supplement the NXP datasheet and typical application notes, including BDM connector wiring and EMC-compliant PCB layout for the QFP-80 package.

Permintaan RFG Kontak
S9S12DG12F1MPVE - 16-Bit 25MHz 128KB Flash MCU | NXP
S9S12DG12F1MPVE

S9S12DG12F1MPVE - 16-Bit 25MHz 128KB Flash MCU | NXP

The NXP Semiconductors S9S12DG12F1MPVE is a 16-bit HCS12 automotive-qualified microcontroller operating up to 25 MHz, with 128 KB of Flash memory and a 112-pin LQFP package measuring 20 mm by 20 mm. It is identified as not for new designs and uses the MC9S12D-family hardware platform described by the retrieved product documentation. A microcontroller is an integrated semiconductor that executes embedded software and coordinates sensors, actuators, communications, timers, analog conversion, and digital I/O. The HCS12 family belongs to the embedded-microcontroller hierarchy rather than a general-purpose processor: firmware, memory interfaces, communication peripherals, and safety-oriented automotive features are integrated into one device. The S9S12DG12F1MPVE is therefore positioned for control-intensive embedded systems rather than desktop computing. The verified data identifies a 16-bit S12 core, 25 MHz operating speed, 128 KB of Flash program memory, and up to 91 I/O lines. Its connectivity includes CANbus, I2C, SPI, and SCI, while its listed peripherals include PWM and a watchdog timer. Two asynchronous serial communication interfaces, an eight-channel IC/OC enhanced capture timer, and two eight-channel 10-bit analog-to-digital converters appear in the retrieved technical summary. The -40°C to +125°C temperature range makes the device suitable for demanding industrial or automotive environments when the exact electrical, timing, and qualification requirements are satisfied by the manufacturer documentation. Its automotive-qualified status is supported by the retrieved part descriptions, while broader RoHS, REACH, and detailed qualification claims remain unverified here. Typical use cases include automotive body and chassis control, industrial automation, CAN-connected equipment, motor-control support, data acquisition, and embedded instrumentation. The CANbus interface is particularly relevant for distributed vehicle networks, while the 10-bit ADC channels support analog sensor conditioning and the PWM peripherals support actuator or power-control functions. Designers should preserve the 112-pin footprint, verify every pin against the official pinout, and budget decoupling, clock, reset, and communication-interface requirements before layout. Because the component is listed as end-of-life or not for new designs, production planning should emphasize verified inventory, firmware continuity, and migration review rather than assuming long-term new-design availability.

Permintaan RFG Kontak
S9S12DG12F1VFUE - 16-Bit 25MHz 128KB Flash MCU | NXP
S9S12DG12F1VFUE

S9S12DG12F1VFUE - 16-Bit 25MHz 128KB Flash MCU | NXP

The NXP Semiconductors S9S12DG12F1VFUE is a 16-bit HCS12 microcontroller operating at 25 MHz, with 128 KB of flash program memory and an 80-pin QFP package. It is automotive qualified for operation from -40°C to +105°C and is designed for embedded control systems requiring serial communications, analog measurement, timing, and CAN connectivity. A microcontroller is a programmable integrated circuit that combines a processor core, memory, and peripherals in one device. The S12 core belongs to the HCS12 family of embedded processors, where the hierarchy is HCS12 microcontroller, embedded processor, semiconductor, and programmable control device. This part combines firmware-programmable logic with hardware peripherals for communications and control, reducing the component count required by a standalone processor design. The verified device data identifies two asynchronous serial communications interfaces, CANbus, I²C, SPI, PWM, a watchdog timer, and two 8-channel 10-bit analog-to-digital converters. An 8-channel enhanced capture timer supports input capture and output compare functions. These peripherals allow the MCU to interface with sensors, actuators, transceivers, and human-machine interfaces while retaining deterministic embedded-control behavior. The part is identified as an HCS12 device with 16-bit architecture, 25 MHz maximum speed, 128 KB flash, 8 KB RAM, 2 KB EEPROM, and 59 I/O according to the supplied technical listings. The listed connectivity includes CANbus, I²C, SCI, and SPI. These resources make the MCU suitable for automotive body and subsystem control, industrial equipment, motor-control adjuncts, communications gateways, and sensor-conditioning systems where a compact 80-QFP package is acceptable. The principal design consideration is lifecycle planning: the NXP product page identifies the device as End of Life. Designs should therefore verify supply continuity, approved sourcing, and long-term obsolescence requirements before new production releases. For replacements, engineers must compare memory, peripheral mapping, package pins, clock requirements, and software compatibility rather than relying on a generic equivalent designation. This page combines verified manufacturer and distributor information, package and interface data, application guidance, and replacement-risk notes. It distinguishes documented specifications from unavailable information so engineers can make a traceable sourcing decision.

Permintaan RFG Kontak
S9S12DG12J5CFUE - 16-bit S12 MCU, 128KB Flash, QFP-80 | NXP
S9S12DG12J5CFUE

S9S12DG12J5CFUE - 16-bit S12 MCU, 128KB Flash, QFP-80 | NXP

The NXP Semiconductors S9S12DG12J5CFUE is a 16-bit microcontroller from the S12D family built around the HCS12 CPU core, delivering 25 MHz of processing performance with 128 KB on-chip Flash memory and 8 KB RAM, housed in an 80-pin LQFP package qualified over the -40C to +85C industrial/automotive temperature range. The device integrates two asynchronous serial communication interfaces (SCI), one serial peripheral interface (SPI), an 8-channel enhanced capture timer, two 8-channel 10-bit analog-to-digital converters (ADC), and a controller area network (CAN) module, providing a complete peripheral set for automotive body and chassis applications. An MCU (Microcontroller Unit) is a single-chip computer that integrates a CPU core, program memory, working RAM, and a configurable set of peripheral interfaces on one silicon die. Within the broader semiconductor taxonomy, the S9S12DG12J5CFUE belongs to the hierarchy: microcontroller -> embedded processor -> semiconductor -> integrated circuit. The HCS12 (S12) core is a 16-bit CISC architecture with a rich instruction set, byte-level EEPROM emulation, and a background debug mode (BDM) interface that enables in-circuit, non-intrusive debugging and Flash programming. Key differentiating features of the S9S12DG12J5CFUE include its 128 KB Flash program memory with byte-erase capability for EEPROM emulation, 8 KB RAM, integrated CAN 2.0 A/B module for in-vehicle networking, dual 10-bit ADC with 1 ms conversion time, and the standard S12 background-debug-mode (BDM) port. The 80-pin LQFP package provides generous I/O (up to 59 general-purpose I/O lines) and is suitable for both hand-soldered prototyping and high-volume automotive SMT assembly lines. The S12 core architecture uses a 16-bit ALU with accumulator-indexed addressing modes, an interrupt controller with up to 7 priority levels, and a memory management unit that supports a flat 1 MB address space with banked Flash access. The 25 MHz bus clock yields approximately 25 MIPS of performance, suitable for body controllers, instrument clusters, HVAC modules, and simple motor-control loops that do not require a dedicated DSP. Typical applications include automotive body controllers, HVAC control modules, instrument cluster slaves, CAN node endpoints, and industrial PLCs. The combination of CAN, dual SCI, SPI, and two ADCs makes it a strong fit for any mechatronic node that must interface with analog sensors and the vehicle CAN bus. When designing with this device, ensure the BDM port pins (BKGD, MODC) are accessible for in-circuit programming and that the 5 V analog supply is properly decoupled to achieve the rated ADC accuracy.

Permintaan RFG Kontak
S9S12DG25F0CFUER - 16-bit MCU, S12 Core, 256KB Flash | NXP
S9S12DG25F0CFUER

S9S12DG25F0CFUER - 16-bit MCU, S12 Core, 256KB Flash | NXP

The NXP Semiconductors / Freescale S9S12DG25F0CFUER is a 16-bit microcontroller built on the HCS12 (S12) CPU core, integrating 256 KB of on-chip Flash memory, a 25 MHz bus frequency, and a 5V supply rail in an 80-pin LQFP package. It is qualified to the automotive Q-100 grade per the device's product page and runs over the -40 °C to +85 °C industrial temperature range. The part is part of the long-running S12DG family of general-purpose automotive microcontrollers used in body, chassis, and powertrain edge nodes. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (RAM), and a rich set of peripherals (timers, ADC, PWM, communication interfaces). Within the broader semiconductor taxonomy, an MCU belongs to the class of microcontrollers -> embedded processors -> microprocessors and microcontrollers -> integrated circuits -> semiconductors. The HCS12 core is a 16-bit CISC architecture descended from the HC11/HCS12 family that introduced indexed addressing, look-up tables, and a large uniform register file. Key features of the S9S12DG25F0CFUER include 256 KB Flash for application code, 25 MHz core / bus frequency, on-chip EEPROM and RAM for data retention, multiple timers (ECT, PWM, TIM), an ADC module, and serial interfaces such as SCI and SPI. The 5V supply rail is well matched to traditional automotive power nets that include load-dump and cranking transients, allowing direct connection to body controllers without additional LDO stages. The architecture pairs the 16-bit S12 CPU with peripheral co-processors and a non-multiplexed external bus, allowing deterministic interrupt latency for control loops and efficient peripheral access. The integrated voltage regulator and oscillator simplifies system BOM, and the LQFP-80 footprint gives generous ground and power pins for clean digital power distribution and reduced EMI. Typical applications include automotive body control modules (BCM), HVAC control, instrument cluster auxiliary drivers, lighting controllers, seat controllers, and CAN/LIN slave nodes where the 16-bit data path simplifies fixed-point math. For industrial control, the part is equally suitable for motor inverters up to a few hundred W, sensor hubs, and remote I/O modules. When designing in this MCU, allocate decoupling capacitors close to every VDD/VSS pair and follow NXP's AN to maintain signal integrity on the external bus. Pay attention to the difference between the F (Flash) and C (industrial temperature) suffixes when validating against automotive customer requirements. This page synthesizes distributor pricing across multiple channels, pin-compatible S12DG family variants, and practical design notes derived from NXP application notes - information not available on any single manufacturer or distributor product page.

Permintaan RFG Kontak
S9S12DG25F0MPVE - 16-bit MCU, 256KB Flash, 25MHz, AEC-Q100 | NXP
S9S12DG25F0MPVE

S9S12DG25F0MPVE - 16-bit MCU, 256KB Flash, 25MHz, AEC-Q100 | NXP

The NXP S9S12DG25F0MPVE is a 16-bit HCS12 microcontroller with 256KB of Flash, 25MHz CPU speed, and automotive-grade qualification, housed in a 112-pin LQFP (20x20 mm) package. Part of the MC9S12D family, this automotive-qualified MCU integrates CAN, SPI, SCI, and I²C connectivity, two 8-channel 10-bit ADCs, an 8-channel enhanced capture timer, 4KB EEPROM, and 91 I/O pins. An automotive MCU is a microcontroller engineered to operate reliably under the harsh environmental conditions found in vehicles, including extended temperature ranges, voltage transients, and electromagnetic interference. The S9S12DG25F0MPVE sits within the broader product hierarchy: microcontroller (MCU) -> embedded processor -> automotive-qualified IC -> semiconductor device. Its AEC-Q100 qualification and -40°C to +125°C operating range place it firmly in the automotive-tolerance tier required for under-hood, body, and chassis ECUs. Key features include a CISC-based HCS12 core with 25MHz bus speed, BDM (Background Debug Mode) for non-intrusive in-circuit debug, PWM outputs for motor control, and a Watchdog Timer for functional-safety integration. The generous 256KB Flash and 4KB EEPROM enable substantial on-board calibration tables, fault logs, and bootloaders, while 91 GPIO pins provide ample headroom for sensor fusion and actuator drive. The S9S12DG25F0MPVE's HCS12 architecture uses a 16-bit data path with an enhanced co-processor instruction set, achieving strong code density for C compilers and an interrupt structure well-suited to deterministic control loops. The 112-LQFP package balances I/O density with manageable PCB footprint, while internal voltage regulators allow single 5V supply operation. Typical applications include automotive body controllers, instrument clusters, HVAC climate-control modules, and CAN-connected sensor nodes. Industrial variants of similar S12 devices are used in motor-control and building-automation subsystems where automotive-grade robustness is valued. Key design considerations include proper decoupling per NXP's AN and adequate thermal management for the LQFP-112 thermal envelope.

Permintaan RFG Kontak
S9S12DP51J4MPVE - 16-Bit 50MHz 256KB Flash MCU | NXP | 112-LQFP
S9S12DP51J4MPVE

S9S12DP51J4MPVE - 16-Bit 50MHz 256KB Flash MCU | NXP | 112-LQFP

The NXP S9S12DP51J4MPVE is a 16-bit microcontroller from the S12D family, built around the CPU12 core running at 50 MHz, integrating 256 KB of on-chip Flash and packaged in a 112-pin LQFP (20 x 20 mm). Originally branded Freescale Semiconductor, the part was carried forward to NXP's automotive and industrial microcontroller portfolio and is now primarily supplied through authorized channels and Rochester Electronics as factory stock. A microcontroller (MCU) is a single-chip processor that integrates a CPU, non-volatile program memory (Flash), volatile working memory (RAM), on-chip peripherals, and support logic in a single package. It belongs to the broader hierarchy of microcontrollers -> embedded processors -> system-on-chip -> semiconductor devices. The 16-bit HCS12/CPU12 architecture positions the S12D family between 8-bit legacy MCUs (used for simple control loops) and 32-bit ARM Cortex-M devices (used for higher-performance digital signal processing), making it well suited for deterministic real-time control in harsh environments. Key features include 256 KB of embedded Flash for application code and parameter storage, 50 MHz CPU clock delivering 1.5 MIPS per MHz of 16-bit CISC performance, an on-chip 5V regulator for automotive 12V battery input, CAN and SCI/UART/SPI/I2C communication peripherals, and a 16-channel 10-bit ADC. The 112-LQFP package provides generous I/O count (digital GPIO plus analog inputs) with leads on all four sides for high-density board routing, while automotive-qualified silicon supports extended temperature operation. Typical applications include automotive body controllers, HVAC control modules, instrument clusters, industrial PLC I/O expansion cards, and machine-to-machine gateway nodes. The wide 5V-tolerant I/O and CAN interfaces make it particularly well matched to SAE J1939 and CANopen networks used in commercial vehicles. When designing with this MCU, verify the available memory map and peripheral channel count against the application firmware requirements, since the S12D family spans variants with different Flash/RAM sizes and peripheral mixes. Confirm Flash endurance and retention ratings versus the expected write-cycle profile before deployment in safety-critical or long-life installations.

Permintaan RFG Kontak
S9S12DP51J4VPVER - S12D 16-bit MCU, 512KB Flash, LQFP-112 | NXP
S9S12DP51J4VPVER

S9S12DP51J4VPVER - S12D 16-bit MCU, 512KB Flash, LQFP-112 | NXP

The NXP S9S12DP51J4VPVER is a 16-bit microcontroller from the HCS12 (S12D) family, integrating 512KB of on-chip Flash memory and packaged in a 112-pin LQFP (20x20 mm). It targets automotive and industrial embedded applications requiring deterministic 16-bit performance, on-chip CAN connectivity, and robust peripheral integration. Core clock is 25MHz with HCS12 instruction set compatibility, providing a mature code base for chassis, body, and powertrain subsystems. Background knowledge: A 16-bit MCU (microcontroller unit) is a compact processor integrating a CPU core, program and data memory, timers, ADCs, communication peripherals (UART, SPI, I2C, CAN), and general-purpose I/O on a single die. Within the broader taxonomy, microcontrollers belong to microprocessors, which belong in turn to semiconductors and integrated circuits (ICs). The HCS12 architecture sits between 8-bit controllers (e.g., HC08, S08) and 32-bit devices (e.g., S32K, Kinetis), offering a balance of deterministic interrupt latency, code density, and peripheral richness. Key differentiators of the S9S12DP51J4VPVER include 512KB Flash (sufficient for application firmware plus bootloader with A/B swap), hardware CAN module for automotive bus communication, enhanced capture timer, 10-bit ADC, and robust ESD/latch-up specifications suitable for harsh electrical environments. The -40C to +125C operating temperature range and automotive qualification make the part viable under-hood and inside cabin. Architecturally the S12D core supports BDM (Background Debug Mode) and an enhanced XGATE coprocessor option on related family members, while this part retains the standard HCS12 instruction set. Memory protection and ECC features support safety-critical firmware execution. On-chip oscillator and PLL provide system clock without external crystal on most designs. Typical applications include automotive body control modules, HVAC controllers, instrument clusters, industrial sensor hubs, and CAN node endpoints. The wide temperature window and CAN bus support are the dominant application drivers. Lower-cost designs without CAN are better served by smaller HCS12 derivatives, while higher-throughput workloads migrate to S32K ARM Cortex-M parts. Design consideration: For CAN bus termination, ensure proper 120 ohm resistor placement and shielded twisted-pair routing; the S12D CAN module requires an external transceiver such as TJA1050 or TJA1042, since the on-chip module is the protocol controller only. Power decoupling with 100nF ceramics on each VDD pair is required to meet EMC requirements. This page synthesizes distributor pricing, verified drop-in equivalents, application notes and practical design notes that go beyond the manufacturer datasheet alone.

Permintaan RFG Kontak
S9S12DT12F1MFUE - 128K Flash Automotive Microcontroller | NXP
S9S12DT12F1MFUE

S9S12DT12F1MFUE - 128K Flash Automotive Microcontroller | NXP

The NXP Semiconductors S9S12DT12F1MFUE is an automotive embedded microcontroller with 128K flash, listed by the verified distributor data as a Microcontroller IC from the Freescale Semiconductor lineage and identified with the AUTO MARLIN2 description. The exact core, memory-map, clock, package, pin count, and electrical limits are not supplied in the verified data, so they remain qualification items rather than inferred values. What is an automotive embedded microcontroller? It is a semiconductor device that combines a processor core, nonvolatile program memory, data memory, and peripheral interfaces into one integrated control component. Automotive-qualified versions are selected for embedded systems that execute deterministic control, communication, sensing, or power-management tasks. The S9S12DT12F1MFUE belongs to this broader embedded -> microcontroller -> automotive MCU hierarchy. The verified product record provides three principal commercial and identity facts: 128K flash, automotive classification, and MARLIN2 identification. The listing also identifies Freescale Semiconductor as the original manufacturer name, while current distributor records associate the part with NXP Semiconductors. Its reported package is PQFP in one distributor result, but the exact package dimensions, terminal count, and exposed-pad arrangement were not provided. Confirm the package drawing and pin map against the official datasheet before PCB release or substitution. Verified marketplace information shows a reference price of $17.82 with 1,200 units in stock in one listing, while another distributor listing reports 1.820 units in stock from $16.70. These observations are source-specific and time-sensitive rather than guaranteed quotations. As of 2026-10-20, use them as purchasing reference points and request a live quote for production quantities, date-code requirements, traceability, and delivery scheduling. The part is best evaluated for legacy automotive and industrial embedded platforms only after the complete datasheet confirms CPU type, Flash organization, SRAM, peripherals, operating voltage, temperature grade, clocking, package dimensions, qualification status, and software-device mapping. Firmware migration also depends on exact peripheral compatibility, pin multiplexing, interrupt vectors, and memory-map equivalence. This evidence-first approach avoids treating a generic functional substitute as a safe production drop-in. The principal purchasing benefit is targeted availability for the exact S9S12DT12F1MFUE orderable code. The principal risk is assuming that similar S9S12 devices are interchangeable without verifying the DT part family, F1 temperature or qualification coding, MFUE package suffix, pin compatibility, and embedded software support. This page consolidates verified distributor inventory, pricing, source links, and unresolved qualification data into one procurement record. It intentionally separates known values from missing technical evidence and does not claim a drop-in replacement unless package, pinout, memory, peripherals, and qualification are all verified.

Permintaan RFG Kontak
S9S12G128AVLFR - 16-bit HCS12 MCU, 128KB Flash, 48-LQFP | NXP
S9S12G128AVLFR

S9S12G128AVLFR - 16-bit HCS12 MCU, 128KB Flash, 48-LQFP | NXP

The NXP Semiconductors S9S12G128AVLFR is a 16-bit HCS12 microcontroller from the 12V1 generation, integrating 128 KB of on-chip Flash memory and 8 KB of RAM, clocked at a maximum 25 MHz CPU rate. It is housed in a 48-pin LQFP (7x7 mm) package suitable for surface-mount automotive and industrial designs. The part is specified across an operating temperature range of -40C to +105C, with a 3.13 V minimum supply voltage supporting 5 V tolerant I/O. What is an HCS12 microcontroller? The HCS12 (and its S12XE/S12G descendants) is NXP's 16-bit CISC microcontroller family evolved from the original Freescale HC12 architecture, targeting automotive body, chassis, and industrial control applications. Within the broader semiconductor taxonomy, an HCS12 MCU belongs to the class of embedded microcontrollers -> 16-bit microcontrollers -> automotive microcontrollers -> mixed-signal automotive ICs. Its hallmark is a deterministic interrupt response, on-chip peripherals (timer/PWM, ADC, SCI, SPI, CAN), and Flash memory suited for in-system reprogramming during end-of-line flashing and field updates. Key features include 40 general-purpose I/O lines, a 10-bit ADC resolution, integrated CAN 2.0A/B controller, multiple serial communication interfaces, and on-chip oscillator with PLL for flexible clock generation. The 12V1 core is optimized for low-power operation with multiple STOP and WAIT modes suitable for body control modules that spend most of their lifecycle in sleep. Architecture-wise, the S12G family uses a 16-bit CISC CPU with a von Neumann bus, a BDM (Background Debug Mode) interface for non-intrusive in-circuit debug, and on-chip voltage regulator supporting 3.3 V or 5 V single-supply operation. The high-resolution timer and PWM modules are suited for motor control loops and lighting controls, while the CAN module addresses in-vehicle networking. Typical applications include automotive body controllers, seat and door modules, HVAC blowers, instrument clusters, generic CAN nodes, and 12 V industrial sensor front-ends. Designers also use the 12V1 in LIN/CAN gateway nodes and small motor drivers where pin count, CAN support, and 5 V I/O tolerance matter. A key design consideration is decoupling: place one 100 nF plus one 4.7 uF bulk capacitor within 5 mm of VDD/VDDR pins to stabilize the internal regulator. Ensure BKGD is pulled high during reset to enable normal mode entry; an unintentional LOW on BKGD places the MCU in BDM mode. This page synthesizes distributor pricing, pin-compatible drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

Permintaan RFG Kontak
S9S12G48F1MLC - 16-bit S12 MCU, 48KB Flash, 25MHz | NXP
S9S12G48F1MLC

S9S12G48F1MLC - 16-bit S12 MCU, 48KB Flash, 25MHz | NXP

The NXP S9S12G48F1MLC is a 16-bit HCS12 microcontroller built on the S12 core, delivering 25MHz CPU performance with 48KB of on-chip Flash memory and integrated CAN/LIN communication peripherals, housed in a 32-pin LQFP (7x7 mm) package. Headline parameters include 16-bit CISC architecture, 25MHz bus clock, 48KB (48K x 8) Flash program memory, automotive-grade -40C to +125C operating range, and 26 user I/O pins. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash/ROM), data memory (RAM), and peripheral interfaces such as timers, ADC, communication controllers, and GPIO into one package. The HCS12 family sits in the automotive/industrial MCU hierarchy: 8-bit HC08 -> 16-bit HCS12 -> 32-bit S12Z -> ARM Cortex-M; this hierarchy reflects trade-offs between cost, deterministic performance, code density, and peripheral integration. The S12G sub-family is NXP's cost-optimized, low-pin-count extension of HCS12, focused on body, chassis, and node applications. Key features include 48KB Flash with 1KB EEPROM for data storage, 2KB RAM, an integrated CAN 2.0A/B controller (msCAN) and LIN/SAE J2602 physical layer, a 16-channel 10-bit ADC, an 8-channel 16-bit timer (TIM), PWM outputs, and SCI/SPI peripheral interfaces. The 32-LQFP package provides automotive-qualified thermal and mechanical reliability. Architecturally, the S9S12G48F1MLC uses the HCS12 CPU core with a 16-bit CISC instruction set, enhanced non-paged Flash memory controller, background debug mode (BDM) for in-circuit development, and a low-power run/wait/stop mode controller with wake-up timers. The 25MHz internal bus frequency supports deterministic interrupt latency required by automotive body controllers. Typical applications include automotive body control modules (BCMs) for window/liftgate/seat controllers, HVAC blowers and fan controllers, instrument cluster sub-nodes, lighting modules (headlamp levelling, interior LED drivers), and industrial CAN/LIN slave nodes. The wide -40C to +125C operating range and AEC-Q100 qualification make it suitable for under-hood and chassis-mounted ECUs. Design considerations include providing a stable 5V supply with adequate decoupling (100nF plus 10uF bulk) near VDD/VSS pins, routing the CAN/LIN transceiver differential pair with 120-ohm characteristic impedance, and using BDM interface for firmware development. The 32-LQFP footprint offers generous creepage/clearance for automotive PCB design. This page synthesizes distributor pricing, pin-compatible S12G drop-in alternatives, and practical automotive design notes not found in the standalone datasheet.

Permintaan RFG Kontak
S9S12G64F0CLH - 16-bit S12 MCU, 64KB Flash, 25MHz, 64-LQFP | NXP
S9S12G64F0CLH

S9S12G64F0CLH - 16-bit S12 MCU, 64KB Flash, 25MHz, 64-LQFP | NXP

The NXP S9S12G64F0CLH is a 16-bit HCS12 (S12G) family microcontroller delivering 25 MHz CPU performance with 64 KB on-chip Flash and 64-pin LQFP (10x10 mm) packaging, qualified to the automotive temperature range. It is intended for cost-sensitive automotive body, chassis and industrial CAN/LIN node applications where deterministic 16-bit performance, low EMI and small footprint are required. What is a 16-bit MCU? A 16-bit microcontroller is an embedded computing device whose central processing unit operates on 16-bit wide data words and addresses, balancing the throughput of 32-bit cores with the code density and cost of 8-bit devices. The NXP S12 family in particular evolved from the original Freescale HC12 architecture and adds on-chip peripherals such as CAN, LIN, SCI, SPI and PWM timers, making it the de facto standard for automotive body electronics and industrial control nodes. Within that hierarchy, the S12G sub-family targets low-cost, low-pin-count applications and sits between 8-bit S08 parts and the higher-end S12XE/S12XEP devices. Key features of the S9S12G64F0CLH include 64 KB (64K x 8) of embedded Flash with Flash block protection, an internal 25 MHz bus from an on-chip PLL driven by an external crystal or resonator, multiple low-power Stop and Wait modes, an integrated CAN 2.0 A/B controller, an SCI/UART, SPI, an 8-channel 10-bit ADC and a 16-bit timer/PWM subsystem. The 64-LQFP package provides 54 usable I/O pins plus dedicated supply, ground and oscillator pins, suitable for medium-complexity node designs. The device uses the well-established S12 CPU with BDM (Background Debug Mode) and a single-wire S12 debug interface, allowing real-time development and in-circuit flash programming without requiring a complex multi-pin emulator. Hardware breakpoints, instruction tagging and on-chip trace are supported via standard NXP development tools. Typical applications include automotive body controllers (BCM), instrument clusters, seat and mirror controllers, HVAC actuators, lighting modules, LIN/CAN sensor nodes, small industrial PLCs and low-cost motor control boards where 16-bit deterministic performance at automotive temperature grades is required. When designing with this device, provide a clean analog supply for the ADC (AVDD with proper decoupling), keep crystal traces short, and verify the Stop mode wakeup sources match your application; the part supports multiple wakeup timers and interrupts. Always review the latest NXP datasheet and errata before committing to a layout. This page combines verified distributor data, application-level guidance, and drop-in same-package alternative suggestions that go beyond the manufacturer datasheet to help engineers select and qualify the S9S12G64F0CLH for production.

Permintaan RFG Kontak
S9S12G64F0MLH - 16-bit S12 MCU, 64KB Flash, 25MHz, Automotive | NXP
S9S12G64F0MLH

S9S12G64F0MLH - 16-bit S12 MCU, 64KB Flash, 25MHz, Automotive | NXP

The NXP S9S12G64F0MLH is a 16-bit HCS12 microcontroller with 64KB Flash, 25MHz CPU clock, 54 I/O lines, and 12-bit ADC, housed in a 64-pin LQFP (10x10 mm) automotive-grade package. It integrates a CISC S12 CPU core, 4KB RAM, 2KB EEPROM, CAN/LIN/SCI/SPI interfaces, and operates from a 3.13V to 5.5V supply across the full -40C to +125C automotive temperature range. An MCU (Microcontroller Unit) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (RAM), and peripheral subsystems such as ADC, timers, and communication controllers. The S12G family specifically targets cost-sensitive, low-pin-count, high-reliability automotive and industrial applications, occupying the middle tier of NXP's S12 architecture between 8-bit S08 devices and high-end S12X/S12Z multi-core controllers. Key differentiating features include hardware CAN 2.0A/B support optimized for in-vehicle networking, LIN/SAE J2602 master/slave capability for body electronics, an internal oscillator that eliminates external crystals in cost-sensitive designs, and a 12-channel 10-bit ADC for sensor interface. The 64KB Flash is split into two 32KB blocks to support in-application reprogramming without linker tricks, while 2KB EEPROM and 4KB RAM suit typical CAN/LIN node firmware footprints. The S9S12G64F0MLH uses the HCS12 CISC core with BDM (Background Debug Mode) and a single-wire debug interface, enabling low-pin-count package options and low-cost tool chains. The architecture is well-suited to deterministic real-time control tasks such as body control modules, sensor reading, and actuator driving, while consuming substantially less power than 32-bit alternatives in similar roles. Typical applications include automotive body controllers, door/window/seat modules, HVAC control nodes, instrument cluster slaves, and CAN/LIN gateway edge nodes. Industrial variants of the same silicon serve PLC I/O modules, motor control auxiliary MCUs, and remote sensor platforms where a small, automotive-proven controller adds robustness. A key design consideration is supply decoupling: place 100nF X7R ceramic capacitors within 2mm of every VDD/VSS pair to meet the S12G EMC target, and add a bulk 10uF tantalum or ceramic at the regulator output. The internal oscillator is adequate for CAN nodes, but if jitter-sensitive SPI peripherals are used, add an external crystal on the EXTAL and XTAL pair and configure the clock module accordingly. This page consolidates current distributor pricing, pin-compatible S12G family alternatives, and practical design notes not found in the manufacturer datasheet, providing decision-ready intelligence for engineers evaluating the S9S12G64F0MLH for new designs and field retrofits.

Permintaan RFG Kontak
S9S12G96F0MLH - 16-bit 96KB Flash 25MHz S12G MCU | NXP
S9S12G96F0MLH

S9S12G96F0MLH - 16-bit 96KB Flash 25MHz S12G MCU | NXP

The NXP Semiconductors S9S12G96F0MLH is a 16-bit HCS12/CPU12 microcontroller from the cost-optimized S12G family, delivering 96KB of on-chip Flash and 25MHz core performance in a 64-pin LQFP (10x10 mm) package. It targets general-purpose automotive and industrial CAN/LIN nodes that require deterministic 16-bit performance without migrating to 32-bit silicon. An MCU (microcontroller unit) is a single-chip computer that integrates a CPU core, non-volatile program memory (Flash/ROM), volatile working memory (RAM), and a configurable set of peripheral IP such as timers, ADC, communication controllers (CAN, LIN, SPI, SCI), and GPIO. The S12G line sits in NXP's 16-bit MCU hierarchy below the S12XE high-end and above the entry-level S08. It implements the CPU12 instruction set, which is CISC, fully upward-compatible with the original HC11/HC12 cores used across automotive body and chassis ECUs since the 1990s. Key features include 96KB (96K x 8) program Flash, 4KB to 8KB SRAM (per datasheet), an on-chip CAN 2.0 controller (msCAN), a LIN 2.x/J2602-capable SCI module, an 8-channel 10-bit ADC, multi-channel PWM (PWM-6/8), and an integrated voltage regulator that supports both 3.3V and 5V single-supply operation from a wide 3.13V to 5.5V (extended) input range. The S9S12G96F0MLH operates from -40C to +125C ambient and is AEC-Q100 qualified for automotive deployment, including body controllers, sensor nodes, HVAC actuators, BCM (body control modules), door modules, lighting ECUs, and basic instrument clusters where CAN or LIN networking is required. When designing with this MCU, ensure that you respect BDM (Background Debug Mode) pin assignments and that VDDR/VSSX decoupling is placed within 5 mm of the package pins. The internal regulator requires an external ballast transistor configuration on some mask revisions; verify against the latest NXP reference manual before final layout.

Permintaan RFG Kontak
S9S12GN16F1MTJ - 16KB Flash 16-Bit MCU | NXP S12G
S9S12GN16F1MTJ

S9S12GN16F1MTJ - 16KB Flash 16-Bit MCU | NXP S12G

NXP Semiconductors S9S12GN16F1MTJ is a 16-bit HCS12 microcontroller from the S12G family featuring 16 KB Flash, 1 KB RAM, 25 MHz CPU clock, and a 10-bit ADC, housed in a 20-pin TSSOP package. The device operates across a wide 3.13 V to 5.5 V supply range (5 V nominal) and supports an industrial/automotive temperature grade of -40C to +125C with AEC-Q100 qualification. What is a 16-bit automotive microcontroller? An MCU (microcontroller unit) is a single-chip computer integrating CPU core, program memory (Flash), data memory (RAM), peripherals (ADC, timers, communication interfaces) and interrupt logic. A 16-bit MCU balances code efficiency and processing throughput for real-time control tasks. The S12 family from NXP sits in the hierarchy: HCS12 core -> 16-bit MCU -> automotive microcontroller -> embedded processor -> semiconductor, optimized for low cost, low pin count, and robust EMC performance. Key features include an HCS12 CPU at 25 MHz internal bus frequency with a background debug mode (BDM), an integrated 10-bit successive-approximation ADC with up to 14 channels (pin-sharing dependent), up to 14 general-purpose I/O pins, and an on-chip voltage regulator with low-voltage reset. The S12G architecture uses a unified Flash array with security lock bits and a hardware ECC for in-application reprogrammability. The S12G is an optimized, 16-bit microcontroller product line focused on low cost, high performance and low pin count. Per NXP product page, the S12G is suited for generic automotive and industrial applications requiring CAN or LIN/SAE J2602 communication, retaining code-size efficiency while supporting CAN, SCI, SPI, and I2C interfaces. Multiple S12G die options share the same peripheral set, simplifying firmware portability. Typical applications include automotive body controllers, CAN/LIN nodes, HVAC control modules, seat and mirror controllers, sensor interfaces, industrial PLC I/O expansion, low-end motor control and appliance control panels. The wide temperature range and AEC-Q100 qualification make the S9S12GN16F1MTJ suited for under-hood and chassis-adjacent ECUs. When designing with the S9S12GN16F1MTJ, ensure the supply rail stays within 3.13 V to 5.5 V and place decoupling capacitors (100 nF plus 10 uF bulk) close to VDD/VSS pairs. Use NXP's S12G bootloader for Flash programming via CAN or SCI to avoid dependence on a BDM tool in production. This page synthesizes distributor availability data, drop-in alternatives within the S12G family, and practical design notes not aggregated on the NXP product page.

Permintaan RFG Kontak