BTS52001ENAXUMA1 vs BTS70082EPAXUMA1 Perbandingan
Perbandingan bersamaan detil BTS52001ENAXUMA1 dari Infineon dan BTS70082EPAXUMA1 dari Infineon. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Infineon
BTS70082EPAXUMA1 - 2x 8mΩ 7.5A Smart High-Side Switch | Infineon PROFET
BTS70082EPAXUMA1 ✓ AktifPerbandingan Spesifikasi
| Parameter Umum | BTS52001ENAXUMA1 | BTS70082EPAXUMA1 |
|---|---|---|
| Merek | Infineon | Infineon |
| Kategori | Power MOSFET Drivers | Power MOSFET Drivers |
| Status Lingkungan Hidup | Aktif | Aktif |
| Product Type | Smart High-Side Power Switch | — |
| Family | Classic PROFET 12V | — |
| Technology | Smart6 (N-channel vertical MOSFET with charge pump) | — |
| Number of Channels | 1 | 2 |
| On-State Resistance (RDS(on)) | 200 mΩ (typical) | — |
| Continuous Load Current | 1.5 A | — |
| Nominal Operating Voltage | 12 V | — |
| Operating Voltage Range | 4.5 V to 28 V (load-dump tolerant) | — |
| Input Control | Logic-level, active-high | — |
| Diagnostic Output | Yes (status feedback) | Current-sense (IS) pin, analog/digital |
| Open-Load Detection | Yes (in OFF state) | — |
| Current Limitation | Yes (integrated) | — |
| Over-Temperature Protection | Yes (with auto-restart) | — |
| Over-Voltage Protection | Yes (load-dump robust) | — |
| Paket | PG-TDSO-8-31 (Exposed Pad) | PG-TSDSO-14-22 (TSSOP-14 EP, 14-pin thermal-pad SMD) |
| Tipe Mounting | Surface Mount | Surface Mount |
| Rentang Suhu Kerja | -40 °C to +150 °C | — |
| Automotive Qualification | AEC-Q100 qualified | — |
| Target Load | 1× R10W 12V lamp, LEDs | — |
| Product Family | — | PROFET+2 (12 V, dual channel) |
| Switch Type | — | High-side N-channel MOSFET switch |
| On-Resistance (RDS(on)) per channel | — | 16 mΩ typical (8 mΩ channel-on resistance per channel pair) |
| Continuous Load Current per channel | — | 7.5 A |
| Nominal Supply Voltage | — | 12 V |
| Operating Supply Voltage Range | — | 3.1 V to 28 V |
| Load Dump / Transient Tolerance | — | 42 V per ISO 7637-2 |
| Reverse Battery Protection | — | -16 V |
| Standby Current | — | [DATA_NEEDED: standby current uA] |
| Current Sense (IS) Ratio kILIS | — | 5000 (typical) |
| Protection Features | — | Overtemperature shutdown, overcurrent, short to ground, short to VS, open load, ground loss |
| Suhu Hubung Kerja | — | -40 °C to +150 °C |
| AEC-Q100 Qualification | — | Yes (Automotive Grade) |
| Level MSL | — | MSL3 (per JEDEC J-STD-020) |
| Status RoHS | — | Compliant |