BTS52001ENAXUMA1 vs BTS70082EPAXUMA1 مقایسه
مقایسه دقیق کنار به کنار BTS52001ENAXUMA1 توسط Infineon و BTS70082EPAXUMA1 توسط Infineon. مشخصات کلیدی، پارامترهای الکتریکی، بسته‌بندی، وضعیت چرخه عمر، قیمت‌گذاری و موجودی را مقایسه کنید تا بهترین قطعه را برای نیازهای طراحی خود تعیین کنید.
Infineon
BTS70082EPAXUMA1 - 2x 8mΩ 7.5A Smart High-Side Switch | Infineon PROFET
BTS70082EPAXUMA1 ✓ فعالمقایسه مشخصات
| پارامتر | BTS52001ENAXUMA1 | BTS70082EPAXUMA1 |
|---|---|---|
| برند | Infineon | Infineon |
| دسته‌بندی | Power MOSFET Drivers | Power MOSFET Drivers |
| وضعیت چرخه عمر | فعال | فعال |
| Product Type | Smart High-Side Power Switch | — |
| Family | Classic PROFET 12V | — |
| Technology | Smart6 (N-channel vertical MOSFET with charge pump) | — |
| Number of Channels | 1 | 2 |
| On-State Resistance (RDS(on)) | 200 mΩ (typical) | — |
| Continuous Load Current | 1.5 A | — |
| Nominal Operating Voltage | 12 V | — |
| Operating Voltage Range | 4.5 V to 28 V (load-dump tolerant) | — |
| Input Control | Logic-level, active-high | — |
| Diagnostic Output | Yes (status feedback) | Current-sense (IS) pin, analog/digital |
| Open-Load Detection | Yes (in OFF state) | — |
| Current Limitation | Yes (integrated) | — |
| Over-Temperature Protection | Yes (with auto-restart) | — |
| Over-Voltage Protection | Yes (load-dump robust) | — |
| بسته‌بندی | PG-TDSO-8-31 (Exposed Pad) | PG-TSDSO-14-22 (TSSOP-14 EP, 14-pin thermal-pad SMD) |
| نوع نصب | Surface Mount | Surface Mount |
| محدوده دمای کاری | -40 °C to +150 °C | — |
| Automotive Qualification | AEC-Q100 qualified | — |
| Target Load | 1× R10W 12V lamp, LEDs | — |
| Product Family | — | PROFET+2 (12 V, dual channel) |
| Switch Type | — | High-side N-channel MOSFET switch |
| On-Resistance (RDS(on)) per channel | — | 16 mΩ typical (8 mΩ channel-on resistance per channel pair) |
| Continuous Load Current per channel | — | 7.5 A |
| Nominal Supply Voltage | — | 12 V |
| Operating Supply Voltage Range | — | 3.1 V to 28 V |
| Load Dump / Transient Tolerance | — | 42 V per ISO 7637-2 |
| Reverse Battery Protection | — | -16 V |
| Standby Current | — | [DATA_NEEDED: standby current uA] |
| Current Sense (IS) Ratio kILIS | — | 5000 (typical) |
| Protection Features | — | Overtemperature shutdown, overcurrent, short to ground, short to VS, open load, ground loss |
| دمای اتصال کاری | — | -40 °C to +150 °C |
| AEC-Q100 Qualification | — | Yes (Automotive Grade) |
| سطح MSL | — | MSL3 (per JEDEC J-STD-020) |
| وضعیت RoHS | — | Compliant |