BTS70021EPPXUMA1 vs BTS70041EPPXUMA1 Perbandingan

Perbandingan bersamaan detil BTS70021EPPXUMA1 dari Infineon dan BTS70041EPPXUMA1 dari Infineon. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.

Perbandingan Spesifikasi

Parameter Umum BTS70021EPPXUMA1 BTS70041EPPXUMA1
Merek Infineon Infineon
Kategori Power MOSFET Drivers Power MOSFET Drivers
Status Lingkungan Hidup Aktif Aktif
Product Family PROFET+2 12V —
Topologi Smart High-Side Switch, N-Channel MOSFET —
Maximum Continuous Load Current 21 A —
On-State Resistance (RDS(on)) 2.6 mOhm typical —
Operating Supply Voltage (Vbb) 6 V to 18 V —
Transient Supply Voltage 28 V (load dump tolerant) —
Standby Current [DATA_NEEDED: typical uA value] —
Current Sense Output (IS) Analog proportional load current Yes (analog proportional to load current)
Fault Output (DEN/IN) Yes, latched —
Reverse Polarity Protection Yes (ReverSave) —
Overload Protection Yes (current limit) —
Short-Circuit Protection Yes (latched) —
Over-Temperature Protection Yes (thermal shutdown with restart) —
Over-Voltage Protection (Vbb clamp) Yes —
Load Dump Clamp Voltage 41 V typical —
Open-Load Detection Yes (on-state and off-state) —
PWM Capability Yes, up to [DATA_NEEDED: max PWM frequency] Yes (low-duty cycle supported via integrated charge pump)
Rentang Suhu Kerja -40 C to +150 C junction —
Paket PG-TSDSO-14-22 (exposed pad) PG-TSDSO-14-22 (14-pin)
Tipe Mounting Surface Mount Surface Mount
Qualification AEC-Q100 automotive qualified —
Status RoHS Compliant (Green Product) Compliant
Part Family — HIC-PROFET +2 12V
Switch Type — High-Side N-Channel Smart Power Switch
Typical R_DS(on) — 4 mOhm at 25 °C
Nominal Load Current — 15 A (DC)
Operating Voltage Range — [DATA_NEEDED: operating voltage range]
Load-Dump Robustness — [DATA_NEEDED: load dump rating]
Input Logic Compatibility — 3.3 V and 5 V CMOS
Diagnostic Enable Pin (DEN) — Yes
Embedded Protection — Over-current, short-circuit, over-temperature, reverse battery
Suhu Kerja — -40 °C to +150 °C (junction)
Level MSL — MSL3 (per JEDEC J-STD-020)
Automotive Qualification — AEC-Q100 qualified

Spek dan Sumber

Buka Semua Produk Buat BOM Ajukan Diskon