BTS70021EPPXUMA1 vs BTS70041EPPXUMA1 Ikinahambing
Detalyadong pagkakahiwalay na pagkakahambing ng BTS70021EPPXUMA1 sa pamamagitan ng Infineon at BTS70041EPPXUMA1 sa pamamagitan ng Infineon. Ikinahambing ang mga pangunahing paglalarawan, mga tama ng elektriko, paakay, kalagayan ng buhay, presyo, at pagkakaroon upang makita ang pinakamahusay na komponente para sa iyong mga kinakailangang pang disenyo.
Infineon
BTS70021EPPXUMA1 - 21A Smart High-Side Switch PG-TSDSO-14 | Infineon
BTS70021EPPXUMA1 ✓ NakahandaInfineon
BTS70041EPPXUMA1 - 15A Smart High-Side Switch, PG-TSDSO-14 | Infineon
BTS70041EPPXUMA1 ✓ NakahandaPagsanggunian na paghahambing
| Parametro | BTS70021EPPXUMA1 | BTS70041EPPXUMA1 |
|---|---|---|
| Brand | Infineon | Infineon |
| Kategorya | Power MOSFET Drivers | Power MOSFET Drivers |
| Katayuan ng Lifecycle | Aktibo | Aktibo |
| Product Family | PROFET+2 12V | — |
| Topolohiya | Smart High-Side Switch, N-Channel MOSFET | — |
| Maximum Continuous Load Current | 21 A | — |
| On-State Resistance (RDS(on)) | 2.6 mOhm typical | — |
| Operating Supply Voltage (Vbb) | 6 V to 18 V | — |
| Transient Supply Voltage | 28 V (load dump tolerant) | — |
| Standby Current | [DATA_NEEDED: typical uA value] | — |
| Current Sense Output (IS) | Analog proportional load current | Yes (analog proportional to load current) |
| Fault Output (DEN/IN) | Yes, latched | — |
| Reverse Polarity Protection | Yes (ReverSave) | — |
| Overload Protection | Yes (current limit) | — |
| Short-Circuit Protection | Yes (latched) | — |
| Over-Temperature Protection | Yes (thermal shutdown with restart) | — |
| Over-Voltage Protection (Vbb clamp) | Yes | — |
| Load Dump Clamp Voltage | 41 V typical | — |
| Open-Load Detection | Yes (on-state and off-state) | — |
| PWM Capability | Yes, up to [DATA_NEEDED: max PWM frequency] | Yes (low-duty cycle supported via integrated charge pump) |
| Hanay ng Temperature na Operasyon | -40 C to +150 C junction | — |
| Packhaging | PG-TSDSO-14-22 (exposed pad) | PG-TSDSO-14-22 (14-pin) |
| Uri ng Pagpapasok | Surface Mount | Surface Mount |
| Qualification | AEC-Q100 automotive qualified | — |
| Tindminan RoHS | Compliant (Green Product) | Compliant |
| Part Family | — | HIC-PROFET +2 12V |
| Switch Type | — | High-Side N-Channel Smart Power Switch |
| Typical R_DS(on) | — | 4 mOhm at 25 °C |
| Nominal Load Current | — | 15 A (DC) |
| Operating Voltage Range | — | [DATA_NEEDED: operating voltage range] |
| Load-Dump Robustness | — | [DATA_NEEDED: load dump rating] |
| Input Logic Compatibility | — | 3.3 V and 5 V CMOS |
| Diagnostic Enable Pin (DEN) | — | Yes |
| Embedded Protection | — | Over-current, short-circuit, over-temperature, reverse battery |
| Temperature na Operasyon | — | -40 °C to +150 °C (junction) |
| Level ng MSL | — | MSL3 (per JEDEC J-STD-020) |
| Automotive Qualification | — | AEC-Q100 qualified |