BTS70021EPPXUMA1 vs BTS70041EPPXUMA1 موازنہ

تفصیلی ساتھ ساتھ موازنہ از BTS70021EPPXUMA1 بذریعہ Infineon اور BTS70041EPPXUMA1 بذریعہ Infineon. اہم خصوصیات، برقی پیرامیٹرز، پیکیجنگ، لائف سائیکل اسٹیٹس، قیمتوں اور دستیابی کا موازنہ کریں تاکہ آپ کی ڈیزائن ضروریات کے لیے بہترین کمپوننٹ کا تعین ہو سکے۔

خصوصیات کا موازنہ

پیرامیٹر BTS70021EPPXUMA1 BTS70041EPPXUMA1
برانڈ Infineon Infineon
زمرہ Power MOSFET Drivers Power MOSFET Drivers
لائف سائیکل کی حالت فعال فعال
Product Family PROFET+2 12V —
ٹوپولوجی Smart High-Side Switch, N-Channel MOSFET —
Maximum Continuous Load Current 21 A —
On-State Resistance (RDS(on)) 2.6 mOhm typical —
Operating Supply Voltage (Vbb) 6 V to 18 V —
Transient Supply Voltage 28 V (load dump tolerant) —
Standby Current [DATA_NEEDED: typical uA value] —
Current Sense Output (IS) Analog proportional load current Yes (analog proportional to load current)
Fault Output (DEN/IN) Yes, latched —
Reverse Polarity Protection Yes (ReverSave) —
Overload Protection Yes (current limit) —
Short-Circuit Protection Yes (latched) —
Over-Temperature Protection Yes (thermal shutdown with restart) —
Over-Voltage Protection (Vbb clamp) Yes —
Load Dump Clamp Voltage 41 V typical —
Open-Load Detection Yes (on-state and off-state) —
PWM Capability Yes, up to [DATA_NEEDED: max PWM frequency] Yes (low-duty cycle supported via integrated charge pump)
آپریٹنگ درجہ حرارت رینج -40 C to +150 C junction —
پیکیج PG-TSDSO-14-22 (exposed pad) PG-TSDSO-14-22 (14-pin)
ماؤنٹنگ ٹائپ Surface Mount Surface Mount
Qualification AEC-Q100 automotive qualified —
RoHS اسٹیٹس Compliant (Green Product) Compliant
Part Family — HIC-PROFET +2 12V
Switch Type — High-Side N-Channel Smart Power Switch
Typical R_DS(on) — 4 mOhm at 25 °C
Nominal Load Current — 15 A (DC)
Operating Voltage Range — [DATA_NEEDED: operating voltage range]
Load-Dump Robustness — [DATA_NEEDED: load dump rating]
Input Logic Compatibility — 3.3 V and 5 V CMOS
Diagnostic Enable Pin (DEN) — Yes
Embedded Protection — Over-current, short-circuit, over-temperature, reverse battery
آپریٹنگ درجہ حرارت — -40 °C to +150 °C (junction)
MSL لیول — MSL3 (per JEDEC J-STD-020)
Automotive Qualification — AEC-Q100 qualified

Datasheets اور وسائل

تمام مصنوعات براؤز کریں BOM بنائیں قیمت کی درخواست کریں