BTS70081EPAXUMA1 vs BTS70401EPAXUMA1 Perbandingan
Perbandingan bersamaan detil BTS70081EPAXUMA1 dari Infineon dan BTS70401EPAXUMA1 dari Infineon. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Perbandingan Spesifikasi
| Parameter Umum | BTS70081EPAXUMA1 | BTS70401EPAXUMA1 |
|---|---|---|
| Merek | Infineon | Infineon |
| Kategori | Power MOSFET Drivers | Power MOSFET Drivers |
| Status Lingkungan Hidup | Aktif | Aktif |
| Product Type | Smart High-Side Power Switch (PROFET) | Smart High-Side Power Switch |
| Topologi | 1:1 N-Channel High-Side Switch | — |
| Continuous Load Current | 10 A | — |
| On-State Resistance (RDS(on) typ.) | 9 mOhm | — |
| Tegangan Pemuat Kerja | 6 V to 18 V | — |
| Load-Dump Survival Voltage | 28 V (per AEC-Q100) | — |
| Standby Current | [DATA_NEEDED: standby current in uA] | — |
| Current Limitation (typ.) | [DATA_NEEDED: IL(LIM) value] | — |
| Diagnostic Output | Open-drain status / current sense | — |
| Protection Features | Reverse battery, over-load, short-circuit, over-temperature, over-voltage clamp, ground loss | — |
| Rentang Suhu Kerja | -40 C to +150 C (Tj) | — |
| Paket | PG-TSDSO-14-22 (14-pin, exposed pad) | PG-TSDSO-14-22 (14-pin, exposed pad) |
| Package Width | 3.90 mm (TSSOP-14 EP equivalent) | — |
| Tipe Mounting | Surface Mount | Surface Mount |
| AEC-Q100 Qualification | Qualified (automotive grade) | Grade 1 (-40 C to +125 C) |
| Status RoHS | Compliant | Compliant |
| Level MSL | [DATA_NEEDED: MSL rating] | — |
| Lead-Free | Yes | — |
| Technology Family | — | PROFET+2 (SMART7) |
| Number of Channels | — | 1 |
| Typical On-Resistance (RDSon) | — | 0.019 Ohm |
| Nominal Load Current | — | 4.5 A |
| Load Voltage Range | — | 3.5 V to 28 V (12 V nominal) |
| Operating Supply Voltage (VS) | — | 3.5 V to 28 V |
| Input Logic Level | — | CMOS 3.3 V / 5 V compatible |
| Reverse Battery Protection | — | ReverSave (integrated) |
| Current Sense Output (IS) | — | Yes (analog) |
| Diagnostic Feedback | — | Fault flag + analog IS pin |
| Functional Safety | — | ISO 26262-ready |