BTS70081EPAXUMA1 vs BTS70401EPAXUMA1 Karşılaştırma
Ayrıntılı yan yana karşılaştırma BTS70081EPAXUMA1 tarafından Infineon ve BTS70401EPAXUMA1 tarafından InfineonAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
Özellik Karşılaştırması
| Parametre | BTS70081EPAXUMA1 | BTS70401EPAXUMA1 |
|---|---|---|
| Marka | Infineon | Infineon |
| Kategori | Power MOSFET Drivers | Power MOSFET Drivers |
| Yaşam Döngüsü Durumu | Aktif | Aktif |
| Product Type | Smart High-Side Power Switch (PROFET) | Smart High-Side Power Switch |
| Ağ Yapısı | 1:1 N-Channel High-Side Switch | — |
| Continuous Load Current | 10 A | — |
| On-State Resistance (RDS(on) typ.) | 9 mOhm | — |
| İşletim Besleme Gerilimi | 6 V to 18 V | — |
| Load-Dump Survival Voltage | 28 V (per AEC-Q100) | — |
| Standby Current | [DATA_NEEDED: standby current in uA] | — |
| Current Limitation (typ.) | [DATA_NEEDED: IL(LIM) value] | — |
| Diagnostic Output | Open-drain status / current sense | — |
| Protection Features | Reverse battery, over-load, short-circuit, over-temperature, over-voltage clamp, ground loss | — |
| İşletim Sıcaklığı Aralığı | -40 C to +150 C (Tj) | — |
| Paket | PG-TSDSO-14-22 (14-pin, exposed pad) | PG-TSDSO-14-22 (14-pin, exposed pad) |
| Package Width | 3.90 mm (TSSOP-14 EP equivalent) | — |
| Montaj Türü | Surface Mount | Surface Mount |
| AEC-Q100 Qualification | Qualified (automotive grade) | Grade 1 (-40 C to +125 C) |
| RoHS Durumu | Compliant | Compliant |
| MSL Seviyesi | [DATA_NEEDED: MSL rating] | — |
| Lead-Free | Yes | — |
| Technology Family | — | PROFET+2 (SMART7) |
| Number of Channels | — | 1 |
| Typical On-Resistance (RDSon) | — | 0.019 Ohm |
| Nominal Load Current | — | 4.5 A |
| Load Voltage Range | — | 3.5 V to 28 V (12 V nominal) |
| Operating Supply Voltage (VS) | — | 3.5 V to 28 V |
| Input Logic Level | — | CMOS 3.3 V / 5 V compatible |
| Reverse Battery Protection | — | ReverSave (integrated) |
| Current Sense Output (IS) | — | Yes (analog) |
| Diagnostic Feedback | — | Fault flag + analog IS pin |
| Functional Safety | — | ISO 26262-ready |