BTS70081EPAXUMA1 vs BTS70401EPAXUMA1 Pengandingan
Pengandingan Sisi Kiri Sisi Kanan Terperinci BTS70081EPAXUMA1 disebabkan oleh Infineon dan BTS70401EPAXUMA1 disebabkan oleh Infineon. Bandingkan spesifikasi utama, parameter elektrik, pakej, status kehidupan, harga, dan keupayaan untuk menentukan komponen terbaik untuk keperluan disenjaya anda.
Pengandingan Spesifikasi
| Parametr | BTS70081EPAXUMA1 | BTS70401EPAXUMA1 |
|---|---|---|
| Merek | Infineon | Infineon |
| Kategori | Power MOSFET Drivers | Power MOSFET Drivers |
| Status Lingkungan Hidup | Aktif | Aktif |
| Product Type | Smart High-Side Power Switch (PROFET) | Smart High-Side Power Switch |
| Tetstruktur | 1:1 N-Channel High-Side Switch | — |
| Continuous Load Current | 10 A | — |
| On-State Resistance (RDS(on) typ.) | 9 mOhm | — |
| Tegangan Pemberi Arus Operasi | 6 V to 18 V | — |
| Load-Dump Survival Voltage | 28 V (per AEC-Q100) | — |
| Standby Current | [DATA_NEEDED: standby current in uA] | — |
| Current Limitation (typ.) | [DATA_NEEDED: IL(LIM) value] | — |
| Diagnostic Output | Open-drain status / current sense | — |
| Protection Features | Reverse battery, over-load, short-circuit, over-temperature, over-voltage clamp, ground loss | — |
| Gambaran Suhu Operasi | -40 C to +150 C (Tj) | — |
| Kemasan | PG-TSDSO-14-22 (14-pin, exposed pad) | PG-TSDSO-14-22 (14-pin, exposed pad) |
| Package Width | 3.90 mm (TSSOP-14 EP equivalent) | — |
| Jenis Pemasangan | Surface Mount | Surface Mount |
| AEC-Q100 Qualification | Qualified (automotive grade) | Grade 1 (-40 C to +125 C) |
| Status RoHS | Compliant | Compliant |
| Aras MSL | [DATA_NEEDED: MSL rating] | — |
| Lead-Free | Yes | — |
| Technology Family | — | PROFET+2 (SMART7) |
| Number of Channels | — | 1 |
| Typical On-Resistance (RDSon) | — | 0.019 Ohm |
| Nominal Load Current | — | 4.5 A |
| Load Voltage Range | — | 3.5 V to 28 V (12 V nominal) |
| Operating Supply Voltage (VS) | — | 3.5 V to 28 V |
| Input Logic Level | — | CMOS 3.3 V / 5 V compatible |
| Reverse Battery Protection | — | ReverSave (integrated) |
| Current Sense Output (IS) | — | Yes (analog) |
| Diagnostic Feedback | — | Fault flag + analog IS pin |
| Functional Safety | — | ISO 26262-ready |