BTS710336ESAXUMA1 vs BTG70902EPLXUMA1 Perbandingan
Perbandingan bersamaan detil BTS710336ESAXUMA1 dari Infineon dan BTG70902EPLXUMA1 dari Infineon. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Infineon
BTG70902EPLXUMA1 - 2A PROFET+2 12V Smart High-Side Switch | Infineon
BTG70902EPLXUMA1 ✓ AktifPerbandingan Spesifikasi
| Parameter Umum | BTS710336ESAXUMA1 | BTG70902EPLXUMA1 |
|---|---|---|
| Merek | Infineon | Infineon |
| Kategori | Power MOSFET Drivers | Power MOSFET Drivers |
| Status Lingkungan Hidup | Aktif | Aktif |
| Product Type | SPI high-side power switch (SPOC+2 family) | — |
| Number of Channels | 6 (4 x 1.5 A + 2 x 3 A) | 1 |
| On-State Resistance (1.5 A channels) | 70 mOhm (typical) | — |
| On-State Resistance (3 A channels) | 22.5 mOhm (typical) | — |
| Maximum Channel Current (1.5 A channels) | 1.5 A | — |
| Maximum Channel Current (3 A channels) | 3 A | — |
| Operating Voltage Range | [DATA_NEEDED: Vbb operating range] | [DATA_NEEDED: Vbb operating range min/max] |
| Logic Interface | SPI (daisy-chain capable, 3.3 V and 5 V compatible) | — |
| Diagnosis | Open-load, short-to-battery, short-to-ground, overtemperature, overload | — |
| Protection Functions | Overload, short-circuit, overtemperature, overvoltage | — |
| Paket | PG-TSDSO-24-42 (24-pin TSSOP with exposed pad) | PG-TSDSO-14 (exposed pad) |
| Technology | SMART7 (SMART power) | — |
| Tipe Mounting | Surface Mount | Surface Mount |
| Rentang Suhu Kerja | -40C to +150C (Tj) | — |
| Status RoHS | Compliant | Compliant |
| Family | SPOC+2 | — |
| Product Family | — | PROFET+2 12V |
| Fungsi | — | Smart High-Side Power Switch |
| Input-to-Output Ratio | — | 1:1 |
| Konfigurasi Output | — | N-Channel High-Side |
| Continuous Load Current | — | 2 A |
| Nominal Operating Voltage | — | 12 V (automotive bus) |
| On-State Resistance (Ron) | — | [DATA_NEEDED: Rdson typ/max in mohm] |
| Batas Arus | — | Fixed (value not specified in retrieved data) |
| Protection Features | — | Overcurrent, Short-Circuit, Over-Temperature (latch), Over-Voltage, Under-Voltage Lockout, Reverse Battery |
| Diagnostic Output | — | DEN pin (current sense / fault flag) |
| Enable Input | — | IN pin (active-high) |
| Channel Select | — | DSEL pin |
| Slew Rate Control | — | Yes (internal, for EMI) |
| Suhu Hubung Kerja | — | -40 C to +150 C |
| Automotive Qualification | — | AEC-Q100 (PROFET+2 family targeted at automotive) |
| Level MSL | — | [DATA_NEEDED: MSL rating per JEDEC J-STD-020] |