BTS710336ESAXUMA1 vs BTG70902EPLXUMA1 مقایسه
مقایسه دقیق کنار به کنار BTS710336ESAXUMA1 توسط Infineon و BTG70902EPLXUMA1 توسط Infineon. مشخصات کلیدی، پارامترهای الکتریکی، بسته‌بندی، وضعیت چرخه عمر، قیمت‌گذاری و موجودی را مقایسه کنید تا بهترین قطعه را برای نیازهای طراحی خود تعیین کنید.
Infineon
BTG70902EPLXUMA1 - 2A PROFET+2 12V Smart High-Side Switch | Infineon
BTG70902EPLXUMA1 ✓ فعالمقایسه مشخصات
| پارامتر | BTS710336ESAXUMA1 | BTG70902EPLXUMA1 |
|---|---|---|
| برند | Infineon | Infineon |
| دسته‌بندی | Power MOSFET Drivers | Power MOSFET Drivers |
| وضعیت چرخه عمر | فعال | فعال |
| Product Type | SPI high-side power switch (SPOC+2 family) | — |
| Number of Channels | 6 (4 x 1.5 A + 2 x 3 A) | 1 |
| On-State Resistance (1.5 A channels) | 70 mOhm (typical) | — |
| On-State Resistance (3 A channels) | 22.5 mOhm (typical) | — |
| Maximum Channel Current (1.5 A channels) | 1.5 A | — |
| Maximum Channel Current (3 A channels) | 3 A | — |
| Operating Voltage Range | [DATA_NEEDED: Vbb operating range] | [DATA_NEEDED: Vbb operating range min/max] |
| Logic Interface | SPI (daisy-chain capable, 3.3 V and 5 V compatible) | — |
| Diagnosis | Open-load, short-to-battery, short-to-ground, overtemperature, overload | — |
| Protection Functions | Overload, short-circuit, overtemperature, overvoltage | — |
| بسته‌بندی | PG-TSDSO-24-42 (24-pin TSSOP with exposed pad) | PG-TSDSO-14 (exposed pad) |
| Technology | SMART7 (SMART power) | — |
| نوع نصب | Surface Mount | Surface Mount |
| محدوده دمای کاری | -40C to +150C (Tj) | — |
| وضعیت RoHS | Compliant | Compliant |
| Family | SPOC+2 | — |
| Product Family | — | PROFET+2 12V |
| عملکرد | — | Smart High-Side Power Switch |
| Input-to-Output Ratio | — | 1:1 |
| پیکربندی خروجی | — | N-Channel High-Side |
| Continuous Load Current | — | 2 A |
| Nominal Operating Voltage | — | 12 V (automotive bus) |
| On-State Resistance (Ron) | — | [DATA_NEEDED: Rdson typ/max in mohm] |
| محدودیت جریان | — | Fixed (value not specified in retrieved data) |
| Protection Features | — | Overcurrent, Short-Circuit, Over-Temperature (latch), Over-Voltage, Under-Voltage Lockout, Reverse Battery |
| Diagnostic Output | — | DEN pin (current sense / fault flag) |
| Enable Input | — | IN pin (active-high) |
| Channel Select | — | DSEL pin |
| Slew Rate Control | — | Yes (internal, for EMI) |
| دمای اتصال کاری | — | -40 C to +150 C |
| Automotive Qualification | — | AEC-Q100 (PROFET+2 family targeted at automotive) |
| سطح MSL | — | [DATA_NEEDED: MSL rating per JEDEC J-STD-020] |