BTT60302ERAXUMA1 vs BTS70021EPPXUMA1 Perbandingan

Perbandingan bersamaan detil BTT60302ERAXUMA1 dari Infineon dan BTS70021EPPXUMA1 dari Infineon. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.

Perbandingan Spesifikasi

Parameter Umum BTT60302ERAXUMA1 BTS70021EPPXUMA1
Merek Infineon Infineon
Kategori Power MOSFET Drivers Power MOSFET Drivers
Status Lingkungan Hidup Aktif Aktif
Product Type Dual-channel Smart High-Side Power Switch —
Family PROFET+ 24V —
Number of Channels 2 —
On-State Resistance (typ, per channel, 25°C) 32 mΩ —
Continuous Load Current (per channel) 4 A —
Operating Supply Voltage (Vbb) 8 V to 36 V 6 V to 18 V
Load-Dump Tolerance 42 V —
Switch Type 1:1 N-Channel high-side —
Process Technology Smart6 (vertical N-MOSFET + charge pump) —
Diagnostic Output Current sense (IS pin) —
Protection Features Overcurrent, overtemperature, short-to-ground/battery, ESD, open-load detection —
Automotive Qualification AEC-Q100 —
Paket PG-TDSO-14-31 (14-pin, exposed pad) PG-TSDSO-14-22 (exposed pad)
Tipe Mounting Surface Mount Surface Mount
Suhu Kerja -40 °C to +150 °C junction —
Standby Current [DATA_NEEDED: standby current] [DATA_NEEDED: typical uA value]
Status RoHS Compliant Compliant (Green Product)
Product Family — PROFET+2 12V
Topologi — Smart High-Side Switch, N-Channel MOSFET
Maximum Continuous Load Current — 21 A
On-State Resistance (RDS(on)) — 2.6 mOhm typical
Transient Supply Voltage — 28 V (load dump tolerant)
Current Sense Output (IS) — Analog proportional load current
Fault Output (DEN/IN) — Yes, latched
Reverse Polarity Protection — Yes (ReverSave)
Overload Protection — Yes (current limit)
Short-Circuit Protection — Yes (latched)
Over-Temperature Protection — Yes (thermal shutdown with restart)
Over-Voltage Protection (Vbb clamp) — Yes
Load Dump Clamp Voltage — 41 V typical
Open-Load Detection — Yes (on-state and off-state)
PWM Capability — Yes, up to [DATA_NEEDED: max PWM frequency]
Rentang Suhu Kerja — -40 C to +150 C junction
Qualification — AEC-Q100 automotive qualified

Spek dan Sumber

Buka Semua Produk Buat BOM Ajukan Diskon