DRV8886ATPWP vs DRV8886PWPR Perbandingan
Perbandingan bersamaan detil DRV8886ATPWP dari Texas Instruments dan DRV8886PWPR dari Texas Instruments. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Texas Instruments
DRV8886ATPWP - 37V 2A Bipolar Stepper Driver | Texas Instruments
DRV8886ATPWP ✓ AktifPerbandingan Spesifikasi
| Parameter Umum | DRV8886ATPWP | DRV8886PWPR |
|---|---|---|
| Merek | Texas Instruments | Texas Instruments |
| Kategori | Motor Drivers | Motor Drivers |
| Status Lingkungan Hidup | Aktif | Aktif |
| Motor Type | Bipolar Stepper | Bipolar stepper (2-phase) |
| Number of Full H-Bridges | 2 | 2 |
| Load Voltage Rating (VM max) | 37 V | — |
| Minimum Operating VM | 8 V | — |
| Logic Supply Voltage (VCC) | 3 V to 5.5 V | — |
| Full-Scale Output Current | 2 A (per H-bridge, 25°C PCB-dependent) | — |
| RMS Output Current | 1.4 A (24 V, TA=25°C, PCB design-dependent) | 1.4 A (24 V, TA = 25 C, PCB-dependent) |
| Peak Output Current | 3 A | 3 A |
| HS + LS On-Resistance (RDSon) | 550 mΩ | 550 mOhm |
| Control Interface | STEP / DIR (Hardware GPIO) | STEP / DIR |
| Microstepping Levels | Full to 1/16 step | Up to 1/16 step |
| Integrated Current Sense | Yes (internal sense, no external resistors) | — |
| AutoTune / Smart Tune Decay | Yes | — |
| Decay Modes | Smart tune, mixed, slow, fast (programmable) | 8 configurable modes including Smart Tune |
| Sleep Current | 20 µA | 20 uA (typical) |
| PWM Chopping Frequency | Up to 100 kHz | Up to 50 kHz |
| Rentang Suhu Kerja | -40°C to +125°C | -40 C to +125 C |
| Temperature Grade | Automotive | — |
| Paket | HTSSOP-24 (PWP) PowerPAD | HTSSOP-24 (PWP) with PowerPAD |
| Tipe Mounting | Surface Mount | Surface Mount |
| Level MSL | 2 (per JEDEC J-STD-020) | — |
| Terminal Finish | Nickel-Palladium-Gold | — |
| Peak Reflow Temperature | 260°C | — |
| Status RoHS | Compliant | Compliant |
| Operating Supply Voltage (VM) | — | 8 V to 37 V |
| Absolute Maximum VM | — | 40 V |
| Full-Scale Output Current (per phase) | — | 2 A |
| Current Sensing | — | Internal (no external sense resistor) |
| Logic Supply Voltage (VINT) | — | 3 V to 5.5 V |
| Protection Features | — | UVLO, OCP, TSD, open-load detect, charge-pump UV |
| Fault Output | — | nFAULT (active-low, open-drain) |
| AEC-Q100 Qualified | — | No (use DRV8886ATPWP for automotive) |