DRV8886ATPWP vs DRV8886PWPR Karşılaştırma
Ayrıntılı yan yana karşılaştırma DRV8886ATPWP tarafından Texas Instruments ve DRV8886PWPR tarafından Texas InstrumentsAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
Texas Instruments
DRV8886ATPWP - 37V 2A Bipolar Stepper Driver | Texas Instruments
DRV8886ATPWP ✓ AktifÖzellik Karşılaştırması
| Parametre | DRV8886ATPWP | DRV8886PWPR |
|---|---|---|
| Marka | Texas Instruments | Texas Instruments |
| Kategori | Motor Drivers | Motor Drivers |
| Yaşam Döngüsü Durumu | Aktif | Aktif |
| Motor Type | Bipolar Stepper | Bipolar stepper (2-phase) |
| Number of Full H-Bridges | 2 | 2 |
| Load Voltage Rating (VM max) | 37 V | — |
| Minimum Operating VM | 8 V | — |
| Logic Supply Voltage (VCC) | 3 V to 5.5 V | — |
| Full-Scale Output Current | 2 A (per H-bridge, 25°C PCB-dependent) | — |
| RMS Output Current | 1.4 A (24 V, TA=25°C, PCB design-dependent) | 1.4 A (24 V, TA = 25 C, PCB-dependent) |
| Peak Output Current | 3 A | 3 A |
| HS + LS On-Resistance (RDSon) | 550 mΩ | 550 mOhm |
| Control Interface | STEP / DIR (Hardware GPIO) | STEP / DIR |
| Microstepping Levels | Full to 1/16 step | Up to 1/16 step |
| Integrated Current Sense | Yes (internal sense, no external resistors) | — |
| AutoTune / Smart Tune Decay | Yes | — |
| Decay Modes | Smart tune, mixed, slow, fast (programmable) | 8 configurable modes including Smart Tune |
| Sleep Current | 20 µA | 20 uA (typical) |
| PWM Chopping Frequency | Up to 100 kHz | Up to 50 kHz |
| İşletim Sıcaklığı Aralığı | -40°C to +125°C | -40 C to +125 C |
| Temperature Grade | Automotive | — |
| Paket | HTSSOP-24 (PWP) PowerPAD | HTSSOP-24 (PWP) with PowerPAD |
| Montaj Türü | Surface Mount | Surface Mount |
| MSL Seviyesi | 2 (per JEDEC J-STD-020) | — |
| Terminal Finish | Nickel-Palladium-Gold | — |
| Peak Reflow Temperature | 260°C | — |
| RoHS Durumu | Compliant | Compliant |
| Operating Supply Voltage (VM) | — | 8 V to 37 V |
| Absolute Maximum VM | — | 40 V |
| Full-Scale Output Current (per phase) | — | 2 A |
| Current Sensing | — | Internal (no external sense resistor) |
| Logic Supply Voltage (VINT) | — | 3 V to 5.5 V |
| Protection Features | — | UVLO, OCP, TSD, open-load detect, charge-pump UV |
| Fault Output | — | nFAULT (active-low, open-drain) |
| AEC-Q100 Qualified | — | No (use DRV8886ATPWP for automotive) |