DRV8886ATPWP vs DRV8886PWPR Pengandingan
Pengandingan Sisi Kiri Sisi Kanan Terperinci DRV8886ATPWP disebabkan oleh Texas Instruments dan DRV8886PWPR disebabkan oleh Texas Instruments. Bandingkan spesifikasi utama, parameter elektrik, pakej, status kehidupan, harga, dan keupayaan untuk menentukan komponen terbaik untuk keperluan disenjaya anda.
Texas Instruments
DRV8886ATPWP - 37V 2A Bipolar Stepper Driver | Texas Instruments
DRV8886ATPWP ✓ AktifPengandingan Spesifikasi
| Parametr | DRV8886ATPWP | DRV8886PWPR |
|---|---|---|
| Merek | Texas Instruments | Texas Instruments |
| Kategori | Motor Drivers | Motor Drivers |
| Status Lingkungan Hidup | Aktif | Aktif |
| Motor Type | Bipolar Stepper | Bipolar stepper (2-phase) |
| Number of Full H-Bridges | 2 | 2 |
| Load Voltage Rating (VM max) | 37 V | — |
| Minimum Operating VM | 8 V | — |
| Logic Supply Voltage (VCC) | 3 V to 5.5 V | — |
| Full-Scale Output Current | 2 A (per H-bridge, 25°C PCB-dependent) | — |
| RMS Output Current | 1.4 A (24 V, TA=25°C, PCB design-dependent) | 1.4 A (24 V, TA = 25 C, PCB-dependent) |
| Peak Output Current | 3 A | 3 A |
| HS + LS On-Resistance (RDSon) | 550 mΩ | 550 mOhm |
| Control Interface | STEP / DIR (Hardware GPIO) | STEP / DIR |
| Microstepping Levels | Full to 1/16 step | Up to 1/16 step |
| Integrated Current Sense | Yes (internal sense, no external resistors) | — |
| AutoTune / Smart Tune Decay | Yes | — |
| Decay Modes | Smart tune, mixed, slow, fast (programmable) | 8 configurable modes including Smart Tune |
| Sleep Current | 20 µA | 20 uA (typical) |
| PWM Chopping Frequency | Up to 100 kHz | Up to 50 kHz |
| Gambaran Suhu Operasi | -40°C to +125°C | -40 C to +125 C |
| Temperature Grade | Automotive | — |
| Kemasan | HTSSOP-24 (PWP) PowerPAD | HTSSOP-24 (PWP) with PowerPAD |
| Jenis Pemasangan | Surface Mount | Surface Mount |
| Aras MSL | 2 (per JEDEC J-STD-020) | — |
| Terminal Finish | Nickel-Palladium-Gold | — |
| Peak Reflow Temperature | 260°C | — |
| Status RoHS | Compliant | Compliant |
| Operating Supply Voltage (VM) | — | 8 V to 37 V |
| Absolute Maximum VM | — | 40 V |
| Full-Scale Output Current (per phase) | — | 2 A |
| Current Sensing | — | Internal (no external sense resistor) |
| Logic Supply Voltage (VINT) | — | 3 V to 5.5 V |
| Protection Features | — | UVLO, OCP, TSD, open-load detect, charge-pump UV |
| Fault Output | — | nFAULT (active-low, open-drain) |
| AEC-Q100 Qualified | — | No (use DRV8886ATPWP for automotive) |