EPC21LC20 vs EPC20LC20U Perbandingan

Perbandingan bersamaan detil EPC21LC20 dari Intel dan EPC20LC20U dari Intel. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.

Perbandingan Spesifikasi

Parameter Umum EPC21LC20 EPC20LC20U
Merek Intel Intel
Kategori Memory ICs Memory ICs
Status Lingkungan Hidup Aktif Obsolete
Tipe Memori Serial Configuration PROM (Flash-based, in-system programmable) Non-volatile configuration memory
Density 2 Mb (2,097,152 bits) —
Configuration Mode Supported Serial (PS) for Altera SRAM-based LUT FPGAs —
Maximum DCLK Frequency 10 MHz —
Access Time approximately 35 ns [DATA_NEEDED: confirm exact datasheet figure] —
Programming Interface IEEE 1149.1 (JTAG) —
Program/Erase Endurance 100 cycles minimum [DATA_NEEDED: confirm from datasheet] —
Operating Voltage (VCC) 3.0 V to 3.6 V (3.3 V typical) —
Standby Current [DATA_NEEDED: ICCSB value] —
Active Read Current [DATA_NEEDED: ICC active current] —
Operating Temperature (commercial) 0 °C to +70 °C (LC suffix) —
Operating Temperature (industrial) [DATA_NEEDED: -40 to +85 °C for LI variant] —
Paket / Case 20-pin PLCC (J-lead, JEDEC MS-018) —
Tipe Mounting Surface Mount (PLCC socket or solder) Surface Mount (PLCC socket compatible)
Level MSL [DATA_NEEDED: confirm moisture sensitivity level] —
Status RoHS [DATA_NEEDED: confirm from Altera product page] [DATA_NEEDED: RoHS compliance status]
Lead-Free (Pb-free) [DATA_NEEDED: confirm] —
Compatible FPGA Families ACEX, APEX, Cyclone, FLEX, Mercury, Stratix (SRAM-based LUT) Altera FLEX 6000, FLEX 8000, FLEX 10K, APEX, ACEX, early Cyclone
JTAG Boundary-Scan Compliant Yes (IEEE Std 1149.1) —
Data Width 1 bit (serial DATA output) —
Manufacturer — Altera Corporation (now Intel)
Fungsi — FPGA Configuration Device (Serial Configuration PROM)
Configuration Interface — Serial (DATA, DCLK, nCS, nINIT_CONF, nSTATUS, OE)
Operating Voltage — 5.0 V (typical)
Absolute Maximum DC Input — -0.3 V to 7.0 V
Transient Input Tolerance — -2.0 V undershoot to 7.0 V overshoot (<100 mA, <20 ns)
Package Type — PLCC-20 (J-lead, plastic leaded chip carrier)
Jumlah Pin — 20
In-System Programming — Supported via JTAG / Quartus programmer
Rentang Suhu Kerja — [DATA_NEEDED: industrial/commercial grade]
Lead-Free / Halogen-Free — [DATA_NEEDED: lead-free status]
Status Lingkungan Hidup — Obsolete / Last-time-buy in distribution

Spek dan Sumber

Buka Semua Produk Buat BOM Ajukan Diskon