EPC21LC20 vs EPC20LC20U Karşılaştırma

Ayrıntılı yan yana karşılaştırma EPC21LC20 tarafından Intel ve EPC20LC20U tarafından IntelAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.

Özellik Karşılaştırması

Parametre EPC21LC20 EPC20LC20U
Marka Intel Intel
Kategori Memory ICs Memory ICs
Yaşam Döngüsü Durumu Aktif Obsolete
Bellek Türü Serial Configuration PROM (Flash-based, in-system programmable) Non-volatile configuration memory
Density 2 Mb (2,097,152 bits) —
Configuration Mode Supported Serial (PS) for Altera SRAM-based LUT FPGAs —
Maximum DCLK Frequency 10 MHz —
Access Time approximately 35 ns [DATA_NEEDED: confirm exact datasheet figure] —
Programming Interface IEEE 1149.1 (JTAG) —
Program/Erase Endurance 100 cycles minimum [DATA_NEEDED: confirm from datasheet] —
Operating Voltage (VCC) 3.0 V to 3.6 V (3.3 V typical) —
Standby Current [DATA_NEEDED: ICCSB value] —
Active Read Current [DATA_NEEDED: ICC active current] —
Operating Temperature (commercial) 0 °C to +70 °C (LC suffix) —
Operating Temperature (industrial) [DATA_NEEDED: -40 to +85 °C for LI variant] —
Paket / Kas 20-pin PLCC (J-lead, JEDEC MS-018) —
Montaj Türü Surface Mount (PLCC socket or solder) Surface Mount (PLCC socket compatible)
MSL Seviyesi [DATA_NEEDED: confirm moisture sensitivity level] —
RoHS Durumu [DATA_NEEDED: confirm from Altera product page] [DATA_NEEDED: RoHS compliance status]
Lead-Free (Pb-free) [DATA_NEEDED: confirm] —
Compatible FPGA Families ACEX, APEX, Cyclone, FLEX, Mercury, Stratix (SRAM-based LUT) Altera FLEX 6000, FLEX 8000, FLEX 10K, APEX, ACEX, early Cyclone
JTAG Boundary-Scan Compliant Yes (IEEE Std 1149.1) —
Data Width 1 bit (serial DATA output) —
Manufacturer — Altera Corporation (now Intel)
Fonksiyon — FPGA Configuration Device (Serial Configuration PROM)
Configuration Interface — Serial (DATA, DCLK, nCS, nINIT_CONF, nSTATUS, OE)
Operating Voltage — 5.0 V (typical)
Absolute Maximum DC Input — -0.3 V to 7.0 V
Transient Input Tolerance — -2.0 V undershoot to 7.0 V overshoot (<100 mA, <20 ns)
Package Type — PLCC-20 (J-lead, plastic leaded chip carrier)
Pin Sayısı — 20
In-System Programming — Supported via JTAG / Quartus programmer
İşletim Sıcaklığı Aralığı — [DATA_NEEDED: industrial/commercial grade]
Lead-Free / Halogen-Free — [DATA_NEEDED: lead-free status]
Yaşam Döngüsü Durumu — Obsolete / Last-time-buy in distribution

Dökümanlar & Kaynaklar

Tüm Ürünleri Gözden Geçir BOM Oluştur Teklif İsteyin