EPC21LC20 vs EPC20LC20U So sánh

So sánh chi tiết song song của EPC21LC20 bằng Intel và EPC20LC20U bằng Intel. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.

So sánh thông số kỹ thuật

Tham số EPC21LC20 EPC20LC20U
Thương hiệu Intel Intel
Danh mục Memory ICs Memory ICs
Trạng thái vòng đời Hoạt động Obsolete
Kiểu bộ nhớ Serial Configuration PROM (Flash-based, in-system programmable) Non-volatile configuration memory
Density 2 Mb (2,097,152 bits) —
Configuration Mode Supported Serial (PS) for Altera SRAM-based LUT FPGAs —
Maximum DCLK Frequency 10 MHz —
Access Time approximately 35 ns [DATA_NEEDED: confirm exact datasheet figure] —
Programming Interface IEEE 1149.1 (JTAG) —
Program/Erase Endurance 100 cycles minimum [DATA_NEEDED: confirm from datasheet] —
Operating Voltage (VCC) 3.0 V to 3.6 V (3.3 V typical) —
Standby Current [DATA_NEEDED: ICCSB value] —
Active Read Current [DATA_NEEDED: ICC active current] —
Operating Temperature (commercial) 0 °C to +70 °C (LC suffix) —
Operating Temperature (industrial) [DATA_NEEDED: -40 to +85 °C for LI variant] —
Hộp / Vỏ 20-pin PLCC (J-lead, JEDEC MS-018) —
Kiểu lắp đặt Surface Mount (PLCC socket or solder) Surface Mount (PLCC socket compatible)
Cấp MSL [DATA_NEEDED: confirm moisture sensitivity level] —
Trạng thái RoHS [DATA_NEEDED: confirm from Altera product page] [DATA_NEEDED: RoHS compliance status]
Lead-Free (Pb-free) [DATA_NEEDED: confirm] —
Compatible FPGA Families ACEX, APEX, Cyclone, FLEX, Mercury, Stratix (SRAM-based LUT) Altera FLEX 6000, FLEX 8000, FLEX 10K, APEX, ACEX, early Cyclone
JTAG Boundary-Scan Compliant Yes (IEEE Std 1149.1) —
Data Width 1 bit (serial DATA output) —
Manufacturer — Altera Corporation (now Intel)
Chức năng — FPGA Configuration Device (Serial Configuration PROM)
Configuration Interface — Serial (DATA, DCLK, nCS, nINIT_CONF, nSTATUS, OE)
Operating Voltage — 5.0 V (typical)
Absolute Maximum DC Input — -0.3 V to 7.0 V
Transient Input Tolerance — -2.0 V undershoot to 7.0 V overshoot (<100 mA, <20 ns)
Package Type — PLCC-20 (J-lead, plastic leaded chip carrier)
Số chân — 20
In-System Programming — Supported via JTAG / Quartus programmer
Khoảng nhiệt độ hoạt động — [DATA_NEEDED: industrial/commercial grade]
Lead-Free / Halogen-Free — [DATA_NEEDED: lead-free status]
Trạng thái vòng đời — Obsolete / Last-time-buy in distribution

Hồ sơ kỹ thuật & Tài nguyên

Xem tất cả sản phẩm Tạo BOM Yêu cầu báo giá