INA114BU vs INA114AP Perbandingan
Perbandingan bersamaan detil INA114BU dari Texas Instruments dan INA114AP dari Texas Instruments. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Texas Instruments
INA114AP - 1MHz Precision Instrumentation Amplifier | Texas Instruments
INA114AP ✓ AktifPerbandingan Spesifikasi
| Parameter Umum | INA114BU | INA114AP |
|---|---|---|
| Merek | Texas Instruments | Texas Instruments |
| Kategori | Amplifier ICs | Amplifier ICs |
| Status Lingkungan Hidup | Aktif | Aktif |
| Amplifier Type | Precision instrumentation amplifier | Precision instrumentation amplifier |
| Architecture | Three-op-amp design | Three-op-amp instrumentation amplifier |
| Number of Circuits | 1 circuit | 1 circuit |
| Gain-Bandwidth Product | 1 MHz | 1 MHz |
| Input Offset Voltage | 50 uV | — |
| Input Noise Density | 11 nV/√Hz | 11 nV/√Hz |
| Typical Supply Current | 3 mA | — |
| Gain Range | 1 to 10,000 | — |
| Gain-Setting Method | One external resistor | — |
| Supply Voltage Range | 2.25 V to 18 V | ±18 V |
| Input Protection Range | ±40 V | — |
| Slew Rate | 0.06 V/µs | — |
| Settling Time | 600 ns | — |
| Rentang Suhu Kerja | -40°C to +85°C | -40°C to +85°C |
| Paket | 16-pin SOIC | 8-pin PDIP |
| Tipe Mounting | Surface mount | Through-hole |
| Product Type | Low-cost, general-purpose precision instrumentation amplifier | — |
| Status RoHS | [DATA_NEEDED: RoHS compliance status] | — |
| REACH Status | [DATA_NEEDED: REACH compliance status] | — |
| Maximum Offset Voltage | — | 50 µV |
| Maximum Offset Voltage Drift | — | 0.25 µV/°C |
| Maximum Input Bias Current | — | 2 nA |
| Minimum Common-Mode Rejection | — | 115 dB |
| Input Overvoltage Protection | — | ±40 V |
| Maximum Quiescent Current | — | 3 mA |
| Long-Term Stability | — | Specified as excellent long-term stability |
| Compliance | — | RoHS and REACH status not stated |