INA114BU vs INA114AP 比較
詳細並排比較 INA114BU 由 Texas Instruments 與 INA114AP 由 Texas Instruments. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況,以找出最符合您設計需求的元件。
Texas Instruments
INA114AP - 1MHz Precision Instrumentation Amplifier | Texas Instruments
INA114AP ✓ 啟用中規格比較
| 參數 | INA114BU | INA114AP |
|---|---|---|
| 品牌 | Texas Instruments | Texas Instruments |
| 類別 | Amplifier ICs | Amplifier ICs |
| 生命週期狀態 | 啟用中 | 啟用中 |
| Amplifier Type | Precision instrumentation amplifier | Precision instrumentation amplifier |
| Architecture | Three-op-amp design | Three-op-amp instrumentation amplifier |
| Number of Circuits | 1 circuit | 1 circuit |
| Gain-Bandwidth Product | 1 MHz | 1 MHz |
| Input Offset Voltage | 50 uV | — |
| Input Noise Density | 11 nV/√Hz | 11 nV/√Hz |
| Typical Supply Current | 3 mA | — |
| Gain Range | 1 to 10,000 | — |
| Gain-Setting Method | One external resistor | — |
| Supply Voltage Range | 2.25 V to 18 V | ±18 V |
| Input Protection Range | ±40 V | — |
| Slew Rate | 0.06 V/µs | — |
| Settling Time | 600 ns | — |
| 工作溫度範圍 | -40°C to +85°C | -40°C to +85°C |
| 封裝 | 16-pin SOIC | 8-pin PDIP |
| 安裝類型 | Surface mount | Through-hole |
| Product Type | Low-cost, general-purpose precision instrumentation amplifier | — |
| RoHS 狀態 | [DATA_NEEDED: RoHS compliance status] | — |
| REACH Status | [DATA_NEEDED: REACH compliance status] | — |
| Maximum Offset Voltage | — | 50 µV |
| Maximum Offset Voltage Drift | — | 0.25 µV/°C |
| Maximum Input Bias Current | — | 2 nA |
| Minimum Common-Mode Rejection | — | 115 dB |
| Input Overvoltage Protection | — | ±40 V |
| Maximum Quiescent Current | — | 3 mA |
| Long-Term Stability | — | Specified as excellent long-term stability |
| Compliance | — | RoHS and REACH status not stated |