INA114BU vs INA114AP 比較
詳細な並列比較: INA114BU メーカー: Texas Instruments および INA114AP メーカー: Texas Instruments。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。
Texas Instruments
INA114AP - 1MHz Precision Instrumentation Amplifier | Texas Instruments
INA114AP ✓ 生産中仕様比較
| パラメータ | INA114BU | INA114AP |
|---|---|---|
| ブランド | Texas Instruments | Texas Instruments |
| カテゴリ | Amplifier ICs | Amplifier ICs |
| ライフサイクル状態 | 有効 | 有効 |
| Amplifier Type | Precision instrumentation amplifier | Precision instrumentation amplifier |
| Architecture | Three-op-amp design | Three-op-amp instrumentation amplifier |
| Number of Circuits | 1 circuit | 1 circuit |
| Gain-Bandwidth Product | 1 MHz | 1 MHz |
| Input Offset Voltage | 50 uV | — |
| Input Noise Density | 11 nV/√Hz | 11 nV/√Hz |
| Typical Supply Current | 3 mA | — |
| Gain Range | 1 to 10,000 | — |
| Gain-Setting Method | One external resistor | — |
| Supply Voltage Range | 2.25 V to 18 V | ±18 V |
| Input Protection Range | ±40 V | — |
| Slew Rate | 0.06 V/µs | — |
| Settling Time | 600 ns | — |
| 動作温度範囲 | -40°C to +85°C | -40°C to +85°C |
| パッケージ | 16-pin SOIC | 8-pin PDIP |
| 実装タイプ | Surface mount | Through-hole |
| Product Type | Low-cost, general-purpose precision instrumentation amplifier | — |
| RoHS ステータス | [DATA_NEEDED: RoHS compliance status] | — |
| REACH Status | [DATA_NEEDED: REACH compliance status] | — |
| Maximum Offset Voltage | — | 50 µV |
| Maximum Offset Voltage Drift | — | 0.25 µV/°C |
| Maximum Input Bias Current | — | 2 nA |
| Minimum Common-Mode Rejection | — | 115 dB |
| Input Overvoltage Protection | — | ±40 V |
| Maximum Quiescent Current | — | 3 mA |
| Long-Term Stability | — | Specified as excellent long-term stability |
| Compliance | — | RoHS and REACH status not stated |