INA114BU vs INA114AP Karşılaştırma
Ayrıntılı yan yana karşılaştırma INA114BU tarafından Texas Instruments ve INA114AP tarafından Texas InstrumentsAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
Texas Instruments
INA114AP - 1MHz Precision Instrumentation Amplifier | Texas Instruments
INA114AP ✓ AktifÖzellik Karşılaştırması
| Parametre | INA114BU | INA114AP |
|---|---|---|
| Marka | Texas Instruments | Texas Instruments |
| Kategori | Amplifier ICs | Amplifier ICs |
| Yaşam Döngüsü Durumu | Aktif | Aktif |
| Amplifier Type | Precision instrumentation amplifier | Precision instrumentation amplifier |
| Architecture | Three-op-amp design | Three-op-amp instrumentation amplifier |
| Number of Circuits | 1 circuit | 1 circuit |
| Gain-Bandwidth Product | 1 MHz | 1 MHz |
| Input Offset Voltage | 50 uV | — |
| Input Noise Density | 11 nV/√Hz | 11 nV/√Hz |
| Typical Supply Current | 3 mA | — |
| Gain Range | 1 to 10,000 | — |
| Gain-Setting Method | One external resistor | — |
| Supply Voltage Range | 2.25 V to 18 V | ±18 V |
| Input Protection Range | ±40 V | — |
| Slew Rate | 0.06 V/µs | — |
| Settling Time | 600 ns | — |
| İşletim Sıcaklığı Aralığı | -40°C to +85°C | -40°C to +85°C |
| Paket | 16-pin SOIC | 8-pin PDIP |
| Montaj Türü | Surface mount | Through-hole |
| Product Type | Low-cost, general-purpose precision instrumentation amplifier | — |
| RoHS Durumu | [DATA_NEEDED: RoHS compliance status] | — |
| REACH Status | [DATA_NEEDED: REACH compliance status] | — |
| Maximum Offset Voltage | — | 50 µV |
| Maximum Offset Voltage Drift | — | 0.25 µV/°C |
| Maximum Input Bias Current | — | 2 nA |
| Minimum Common-Mode Rejection | — | 115 dB |
| Input Overvoltage Protection | — | ±40 V |
| Maximum Quiescent Current | — | 3 mA |
| Long-Term Stability | — | Specified as excellent long-term stability |
| Compliance | — | RoHS and REACH status not stated |