INA128UA vs INA126UA Perbandingan
Perbandingan bersamaan detil INA128UA dari Texas Instruments dan INA126UA dari Texas Instruments. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Texas Instruments
INA126UA - 36V Precision MicroPower Instrumentation Amplifier | TI
INA126UA ✓ AktifPerbandingan Spesifikasi
| Parameter Umum | INA128UA | INA126UA |
|---|---|---|
| Merek | Texas Instruments | Texas Instruments |
| Kategori | Amplifier ICs | Amplifier ICs |
| Status Lingkungan Hidup | Aktif | Aktif |
| Product Type | Precision low-power instrumentation amplifier | — |
| Number of Channels | 1 channel | 1 channel |
| Common-Mode Rejection Ratio | 130 dB | 74 dB minimum |
| Minimum Common-Mode Rejection Ratio | 120 dB | — |
| Maximum Offset Voltage | 50 uV | — |
| Maximum Offset Voltage Drift | 0.5 uV/degC | — |
| Maximum Input Bias Current | 5 nA | — |
| Arus Memerintah | 700 uA | 175 µA per channel |
| Gain Range | 1 to 10,000 V/V | — |
| Gain-Bandwidth Product | 1.3 MHz | — |
| Bandwidth at Gain 100 | 200 kHz | — |
| Input Protection Range | -40 V to +40 V | — |
| Supply Voltage Range | -18 V to +18 V | — |
| Minimum Dual Supply Voltage | -2.25 V to +2.25 V | — |
| Rentang Suhu Kerja | -40 degC to +85 degC | — |
| Paket | 8-pin SOIC, 3.90 mm width | 8-pin SOIC |
| Tipe Mounting | Surface mount | Surface mount |
| Architecture | Three-op-amp instrumentation amplifier with current-feedback input circuitry | Two-op-amp instrumentation amplifier |
| Status RoHS | Compliant | unknown |
| Amplifier Type | — | Single-channel precision instrumentation amplifier |
| Maximum Supply Voltage | — | 36 V |
| Minimum Total Supply Voltage | — | 2.7 V |
| Dual-Supply Operating Range | — | ±1.35 V to ±18 V |
| Input Offset Voltage | — | 250 µV maximum |
| Gain Bandwidth | — | 200 kHz |
| Gain Configuration | — | External resistor configuration |
| Signal Type | — | Differential input, single-ended output |
| Application Category | — | Low-noise differential signal acquisition |
| REACH Status | — | unknown |
| AEC-Q100 Qualification | — | unknown |