INA128UA vs INA126UA Ikinahambing
Detalyadong pagkakahiwalay na pagkakahambing ng INA128UA sa pamamagitan ng Texas Instruments at INA126UA sa pamamagitan ng Texas Instruments. Ikinahambing ang mga pangunahing paglalarawan, mga tama ng elektriko, paakay, kalagayan ng buhay, presyo, at pagkakaroon upang makita ang pinakamahusay na komponente para sa iyong mga kinakailangang pang disenyo.
Texas Instruments
INA126UA - 36V Precision MicroPower Instrumentation Amplifier | TI
INA126UA ✓ NakahandaPagsanggunian na paghahambing
| Parametro | INA128UA | INA126UA |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Kategorya | Amplifier ICs | Amplifier ICs |
| Katayuan ng Lifecycle | Aktibo | Aktibo |
| Product Type | Precision low-power instrumentation amplifier | — |
| Number of Channels | 1 channel | 1 channel |
| Common-Mode Rejection Ratio | 130 dB | 74 dB minimum |
| Minimum Common-Mode Rejection Ratio | 120 dB | — |
| Maximum Offset Voltage | 50 uV | — |
| Maximum Offset Voltage Drift | 0.5 uV/degC | — |
| Maximum Input Bias Current | 5 nA | — |
| Kuru-kuryente ng Kapayapaan | 700 uA | 175 µA per channel |
| Gain Range | 1 to 10,000 V/V | — |
| Gain-Bandwidth Product | 1.3 MHz | — |
| Bandwidth at Gain 100 | 200 kHz | — |
| Input Protection Range | -40 V to +40 V | — |
| Supply Voltage Range | -18 V to +18 V | — |
| Minimum Dual Supply Voltage | -2.25 V to +2.25 V | — |
| Hanay ng Temperature na Operasyon | -40 degC to +85 degC | — |
| Packhaging | 8-pin SOIC, 3.90 mm width | 8-pin SOIC |
| Uri ng Pagpapasok | Surface mount | Surface mount |
| Architecture | Three-op-amp instrumentation amplifier with current-feedback input circuitry | Two-op-amp instrumentation amplifier |
| Tindminan RoHS | Compliant | unknown |
| Amplifier Type | — | Single-channel precision instrumentation amplifier |
| Maximum Supply Voltage | — | 36 V |
| Minimum Total Supply Voltage | — | 2.7 V |
| Dual-Supply Operating Range | — | ±1.35 V to ±18 V |
| Input Offset Voltage | — | 250 µV maximum |
| Gain Bandwidth | — | 200 kHz |
| Gain Configuration | — | External resistor configuration |
| Signal Type | — | Differential input, single-ended output |
| Application Category | — | Low-noise differential signal acquisition |
| REACH Status | — | unknown |
| AEC-Q100 Qualification | — | unknown |