INA128UA vs INA126UA 比較
詳細並排比較 INA128UA 由 Texas Instruments 與 INA126UA 由 Texas Instruments. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況,以找出最符合您設計需求的元件。
規格比較
| 參數 | INA128UA | INA126UA |
|---|---|---|
| 品牌 | Texas Instruments | Texas Instruments |
| 類別 | Amplifier ICs | Amplifier ICs |
| 生命週期狀態 | 啟用中 | 啟用中 |
| Product Type | Precision low-power instrumentation amplifier | — |
| Number of Channels | 1 channel | 1 channel |
| Common-Mode Rejection Ratio | 130 dB | 74 dB minimum |
| Minimum Common-Mode Rejection Ratio | 120 dB | — |
| Maximum Offset Voltage | 50 uV | — |
| Maximum Offset Voltage Drift | 0.5 uV/degC | — |
| Maximum Input Bias Current | 5 nA | — |
| 靜態電流 | 700 uA | 175 µA per channel |
| Gain Range | 1 to 10,000 V/V | — |
| Gain-Bandwidth Product | 1.3 MHz | — |
| Bandwidth at Gain 100 | 200 kHz | — |
| Input Protection Range | -40 V to +40 V | — |
| Supply Voltage Range | -18 V to +18 V | — |
| Minimum Dual Supply Voltage | -2.25 V to +2.25 V | — |
| 工作溫度範圍 | -40 degC to +85 degC | — |
| 封裝 | 8-pin SOIC, 3.90 mm width | 8-pin SOIC |
| 安裝類型 | Surface mount | Surface mount |
| Architecture | Three-op-amp instrumentation amplifier with current-feedback input circuitry | Two-op-amp instrumentation amplifier |
| RoHS 狀態 | Compliant | unknown |
| Amplifier Type | — | Single-channel precision instrumentation amplifier |
| Maximum Supply Voltage | — | 36 V |
| Minimum Total Supply Voltage | — | 2.7 V |
| Dual-Supply Operating Range | — | ±1.35 V to ±18 V |
| Input Offset Voltage | — | 250 µV maximum |
| Gain Bandwidth | — | 200 kHz |
| Gain Configuration | — | External resistor configuration |
| Signal Type | — | Differential input, single-ended output |
| Application Category | — | Low-noise differential signal acquisition |
| REACH Status | — | unknown |
| AEC-Q100 Qualification | — | unknown |