INA128UA vs INA126UA 比較
詳細な並列比較: INA128UA メーカー: Texas Instruments および INA126UA メーカー: Texas Instruments。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。
仕様比較
| パラメータ | INA128UA | INA126UA |
|---|---|---|
| ブランド | Texas Instruments | Texas Instruments |
| カテゴリ | Amplifier ICs | Amplifier ICs |
| ライフサイクル状態 | 有効 | 有効 |
| Product Type | Precision low-power instrumentation amplifier | — |
| Number of Channels | 1 channel | 1 channel |
| Common-Mode Rejection Ratio | 130 dB | 74 dB minimum |
| Minimum Common-Mode Rejection Ratio | 120 dB | — |
| Maximum Offset Voltage | 50 uV | — |
| Maximum Offset Voltage Drift | 0.5 uV/degC | — |
| Maximum Input Bias Current | 5 nA | — |
| 静止電流 | 700 uA | 175 µA per channel |
| Gain Range | 1 to 10,000 V/V | — |
| Gain-Bandwidth Product | 1.3 MHz | — |
| Bandwidth at Gain 100 | 200 kHz | — |
| Input Protection Range | -40 V to +40 V | — |
| Supply Voltage Range | -18 V to +18 V | — |
| Minimum Dual Supply Voltage | -2.25 V to +2.25 V | — |
| 動作温度範囲 | -40 degC to +85 degC | — |
| パッケージ | 8-pin SOIC, 3.90 mm width | 8-pin SOIC |
| 実装タイプ | Surface mount | Surface mount |
| Architecture | Three-op-amp instrumentation amplifier with current-feedback input circuitry | Two-op-amp instrumentation amplifier |
| RoHS ステータス | Compliant | unknown |
| Amplifier Type | — | Single-channel precision instrumentation amplifier |
| Maximum Supply Voltage | — | 36 V |
| Minimum Total Supply Voltage | — | 2.7 V |
| Dual-Supply Operating Range | — | ±1.35 V to ±18 V |
| Input Offset Voltage | — | 250 µV maximum |
| Gain Bandwidth | — | 200 kHz |
| Gain Configuration | — | External resistor configuration |
| Signal Type | — | Differential input, single-ended output |
| Application Category | — | Low-noise differential signal acquisition |
| REACH Status | — | unknown |
| AEC-Q100 Qualification | — | unknown |