IR2132STRPBF vs IR2132SPBF Perbandingan
Perbandingan bersamaan detil IR2132STRPBF dari Infineon dan IR2132SPBF dari Infineon. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Perbandingan Spesifikasi
| Parameter Umum | IR2132STRPBF | IR2132SPBF |
|---|---|---|
| Merek | Infineon | Infineon |
| Kategori | Power MOSFET Drivers | Power MOSFET Drivers |
| Status Lingkungan Hidup | Aktif | Aktif |
| Configuration | 3-Phase Bridge | Inverting input |
| Driver Type | Half-Bridge Gate Driver, Inverting Input | — |
| Number of Drivers | 6 (3 high-side + 3 low-side) | — |
| Offset Voltage (Max) | 600 V | — |
| Gate Drive Supply Voltage (VCC) | 10 V to 20 V | 10 V to 20 V |
| Source Current (Typ.) | 250 mA | — |
| Sink Current (Typ.) | 500 mA | — |
| Propagation Delay (Typ.) | 675 ns | — |
| Internal Dead-Time (Typ.) | 0.8 µs | — |
| Input Logic | Inverting (HIN/LIN active-low) | — |
| Bootstrap Architecture | Yes (floating high-side channel) | — |
| Undervoltage Lockout (UVLO) | Yes, on all channels | Yes, all 6 channels |
| Over-Current Protection | Yes, with ITRIP input and FAULT output | — |
| Integrated Op-Amp | Yes (current-sense amplifier) | — |
| Fault Output | Yes, active-low latched FAULT pin | — |
| dV/dt Immunity | Yes (negative transient tolerant) | Yes |
| Paket | 28-SOICWB (0.295 inch / 7.50 mm width) | 28-SOIC (Wide Body, 7.50 mm) |
| Tipe Mounting | Surface Mount | Surface Mount |
| Rentang Suhu Kerja | [DATA_NEEDED: operating temperature range] | -40C to +125C |
| Status RoHS | Compliant (PBF suffix) | — |
| Part Number | — | IR2132SPBF |
| Manufacturer | — | Infineon Technologies (formerly International Rectifier) |
| Fungsi | — | Half-Bridge Gate Driver IC (3-phase, 6-channel) |
| Jumlah Output | — | 6 (3 high-side, 3 low-side) |
| Maximum Offset Voltage (High-Side) | — | 600 V |
| Output Current (Source/Sink) | — | 0.5 A |
| Logic Input Compatibility | — | CMOS/LSTTL, down to 2.5 V logic |
| Typical Deadtime | — | 0.8 us |
| Bootstrap Design | — | Required for high-side channels |
| Negative VS Transient Tolerance | — | Yes |
| Lead-Free / RoHS | — | Yes (PbF suffix, RoHS compliant) |
| Packaging | — | Tube |
| Topologi | — | 3-phase bridge driver for MOSFETs/IGBTs |